Meklex:
What can I do to this? The door frame is preventing me from turning the key

I think the left side just before the green arrow can be beaten inwards to allow for key rotation...

We got some rechargeable fans available


08051355133 WhatsApp
08035153923

hamtabfawaz:


Dreadful.... I hope he sued the hotel management.

I’m sure he must have by now.

Godisgreatest1:


Compliments of the Season Sir,

Kindly go for Stainless Screws 6mm or 8mm and the accompanying Fisher plugs (Red or White).

The Screws should be Stainless so they can be resistant to rust and Caustic soda.

Well done.

Thanks and that’s exactly what I’m doing,

The vendor is on here too.

EgunMogaji2:


Thanks and that’s exactly what I’m doing,

The vendor is on here too.

Ok Sir, well done.

Patriot9:

Lolz. Pastor? Did you scam a pastor recently too?
The truth is, you are one of the numerous scammers we have here on nairaland.

fake pastor 😂😂 u go explain tire don’t worry we know what you and your people are doing. Everyone screenshot my comment now so that when his face is plastered on nairaland holding a human head it will be learnt that i said it. Someone that can’t combine words coherently was bragging that he is a pastor and he is anointed and that is where he got money, money that you can’t even build something better. Kill person for just 2bedroom bongalow. Nah juju go kill you upon the whole juju a d rituals this fool offered 2500 for a building design. Shameless fool

visaclick:
fake pastor 😂😂 u go explain tire don’t worry we know what you and your people are doing. Everyone screenshot my comment now so that when his face is plastered on nairaland holding a human head it will be learnt that i said it. Someone that can’t combine words coherently was bragging that he is a pastor and he is anointed and that is where he got money, money that you can’t even build something better. Kill person for just 2bedroom bongalow. Nah juju go kill you upon the whole juju a d rituals this fool offered 2500 for a building design. Shameless fool

NAwaoo how will you get another customer like this?

Happy new year to you all my people

bolu1986:


NAwaoo how will you get another customer like this?

not all of us are struggling like you.

Godisgreatest1:



Compliments of the Season Sir,

Kindly go for Stainless Screws 6mm or 8mm and the accompanying Fisher plugs (Red or White).

The Screws should be Stainless so they can be resistant to rust and Caustic soda.

Well done.

Can I buy a box of this appropriate screws and plugs from you? Thanks.

visaclick:
not all of us are struggling like you.

It is obvious you are struggling mentally. Making derogatory comments and ridiculing others because of the facts they pointing out to you shows that you need help and you need it fast Fucker..

How I so wished we could meet in person and dissect your comments properly.

Patriot9:

Lolz. Pastor? Did you scam a pastor recently too?
The truth is, you are one of the numerous scammers we have here on nairaland.

Oga mi, With the long epistle he put out here the first time I can easily read through his kind of person.

He’s definitely a scammer who is seeking face with fellow scammers. There’s no way on earth will you see a normal thinking person trying to condemn action of a person aggrieved of disloyalty and try to conjoined instances that are not there just so he can back up his argument. Pls ignore his rant .

saydfact:
The only person I blame for all these Negative stories every now and then is the moderator Lawyer (who in my opinion does nothing) and by extension Seun.

Well, Seun has released a statement, I hope he does what's needed in property section.

Lawyer - no offence taken, but I've never seen a post where you try to stop these things happening or where the post of a suspected fraudstar is taken down.

On many occasions, I've put out a tutorial and it keeps getting blocked by the BOT (a simple tutorial) - in other forums, the mod notice the wrong blocking and make the post life... But never in property, it sometimes discourages one putting a post forward.... Yet in same forum you see a lot of 'suspected fraudstar' having a good day....


Goodluck.

True talk .. this people are into some kind cult or something. Imagine the level of fraud being perpetrated on this forum and nothing was done about it .. It shows that something was not right .. That’s why you see people like Visalick makes comments that kind of give the fraudster power to do more of their damages. Believe it or not you crooks on here will pay sooner or later.

EgunMogaji2:


Can I buy a box of this appropriate screws and plugs from you? Thanks.

Good afternoon Sir,

I have searched but I could only find a hand full as attached. I can recall I bought some from Mile 3 Market in PH mid last year.

They are on vacation till 8th of January.

Well done Sir.

Meklex:
What can I do to this? The door frame is preventing me from turning the key

Oooo, ga ooo. Professionals from hell.

michlins:
buy a key with slimmer frame.

Good morning

Do you think a key with a slimmer frame will solve the issue?

The problem is the allowance between the key hole and the metal door frame. There is not enough allowance to turn the key and lock/open the door. Will a slimmer key frame increase the allowance? I'm not too sure it will.

Rawgold300:


Oga mi, With the long epistle he put out here the first time I can easily read through his kind of person.

He’s definitely a scammer who is seeking face with fellow scammers. There’s no way on earth will you see a normal thinking person trying to condemn action of a person aggrieved of disloyalty and try to conjoined instances that are not there just so he can back up his argument. Pls ignore his rant .

and seems like u are heavily into the human rituals stuffs but it’s okay anyways the country is hard enough so why not slaughter and kill as long as it brings money. I know that patroit fool one on one and this man runs a church where they even sing and preach with pure Yoruba now this same person can’t even comprehend and communicate properly yet he is here running his mouth but now you both have something in common which is juju. Like eh the way this juju of a thing is now normalize is alarming. Patriot9 is a heavy ritualist who should be apprehended real time soon because he is hiding behind the pastor title.
The fool upon his rituals offered 2500 for a building design. This was like 2years ago but here we are still doing fine and great infact we made more money seh. Who building help we are into bigger things bro we don’t need your construction money hahaha. Right now people just want to feed their stomachs so if you are an architect or engineer just forget about anything job for now and find something else or else you beg for food but some of you here no want get sense but to run your fingers anyhow.

diordaves:


Do you think a key with a slimmer frame will solve the issue?

The problem is the allowance between the key hole and the metal door frame. There is not enough allowance to turn the key and lock/open the door. Will a slimmer key frame increase the allowance? I'm not too sure it will.

This is an issue I encounter every day as this is my work. The frame is the problem and the welder should have fixed it earlier

diordaves:


Wahala dey o. Na who install the door?

It is a wrong size of door. The door is bigger (wider) than the opening.

Take down the entire door and frame. Knock back the wall to widen the door opening to the appropriate width. Install back the frame, dress it and hang back the door.

If the door comes together with the frame (metal door), take the whole thing down, widen the opening to the right size and install again.

If all the above is not the case, check the hinges. The hinges may be out of sync and loose. Check the screws and tighten.

ah. It's a new apartment I just paid for. Noticed the issue yesterday after payment

visaclick:
and seems like u are heavily into the human rituals stuffs but it’s okay anyways the country is hard enough so why not slaughter and kill as long as it brings money. I know that patroit fool one on one and this man runs a church where they even sing and preach with pure Yoruba now this same person can’t even comprehend and communicate properly yet he is here running his mouth but now you both have something in common which is juju. Like eh the way this juju of a thing is now normalize is alarming. Patriot9 is a heavy ritualist who should be apprehended real time soon because he is hiding behind the pastor title.
The fool upon his rituals offered 2500 for a building design. This was like 2years ago but here we are still doing fine and great infact we made more money seh. Who building help we are into bigger things bro we don’t need your construction money hahaha. Right now people just want to feed their stomachs so if you are an architect or engineer just forget about anything job for now and find something else or else you beg for food but some of you here no want get sense but to run your fingers anyhow.

It's a complete foolery indulging you in a conversation.
How could this senile slowpoke called me a ritualist?
Well, I guess this is the new reality of sane men on nairaland now; when a social platform grounded to foster humans creativities is being polluted by a spinless critter like visaclick.
I paid you 4000 to do a job and all what senescent you could do is to call rant about your generation

michlins:
This is an issue I encounter every day as this is my work. The frame is the problem and the welder should have fixed it earlier

what can be done at this point?

Rawgold300:


Oga mi, With the long epistle he put out here the first time I can easily read through his kind of person.

He’s definitely a scammer who is seeking face with fellow scammers. There’s no way on earth will you see a normal thinking person trying to condemn action of a person aggrieved of disloyalty and try to conjoined instances that are not there just so he can back up his argument. Pls ignore his rant .

Nobody go give am job to do
Visaclick is a 419.
Make una run oo

If you have not scammed me before, how did I get your details?

His Full name is KADIRI ELVIS LUCKY
HIS KUDA ACCOUNT NUMBER IS 2021795271
Please Usain Bolt from him. grin grin

How much is granite in the south south and what is considered a small tipper?

Thanks.

Meklex:
what can be done at this point?

at this point, get a key with slimmer handle. If it doesn't work, you will pull the door, ensure that they expand the centre where the key is with wood before reinstallation

Before and after the installation of Day and night Blind.

Contact us to for your quality and affordable widow Blind to transform your office space

Contact: 08119470142

EgunMogaji2:
How much is granite in the south south and what is considered a small tipper?

Thanks.

Not sure about the cost of granite in the south south at the moment. Been a while since I did any granite. Small tipper for us in Bayelsa refers to 6 tyre tipper (AKA 911 tipper)

Rany4all:
Not sure about the cost of granite in the south south at the moment. Been a while since I did any granite. Small tipper for us in Bayelsa refers to 6 tyre tipper (AKA 911 tipper)

I will also like to know no the price too

erico2k2:

Just buy your paint yourself and let him paint

When paints finished, buy more. Matter solved.

Hajji M.

Gentle and ladies, Does anyone have a simple twin 3 bedroom bungalow design? "Simple design"

Meklex:
What can I do to this? The door frame is preventing me from turning the key

The door is oversized. I doubt if adequate measurements (of the door opening vis-à-vis the thickness of the doorframes) were done before buying or fabricating the door.

There are a lot of fixes.

One could be costlier than the other. The cheapest may be to thin-down the frame to allow key spinning, since you insist on being able to rotate the key.
Because your aim is just for the to turn or spin, taking off about 5 to 10mm of material from that doorframe may be help but it may deface or distort the thickness of the frame compared to others. I doubt if the frame’s thickness is up to 2 inches.

I still wonder where the door spindle will lock into spindle plate in the doorframe because the picture you shared is not showing where the door engine is locking into, as I have said earlier. Is it locking into the wall brick or into the wooden frame because that door is oversized?

It would be good if you can share the pix of where the spindle will lock into (that’s if there is any). If there’s none, the next fix may be to remove the frame completely and let bricklayers take of some bricks from the wall to accommodate the wideness of the door. This will be expensive than the first fix sha.

To do that, you need to properly know which side of the doorframes would be perfect to brake-down its bricks. It’s not compulsory the expansion is done at the side where the door engine is. Check with your bricklayer to know which side is safer, considering so many things e.g closeness to another wall or concrete or column.

You may end up condemning the frame bracket (the bar) because it will be shorter after expansion/pulling down of the bricks.

Expect more damage to the doorframes, if you have used conventional nails in joining them together. Whoever is handling the repair has to be careful.

Please try and share the pix of where the door will lock into. Let’s see if the frame can be reduced to 1-inch thickness at that side and be able to accommodate the door.