There are no options for more dates.. I dont know what else to do.. I have a feeling it is a software related problem..The laptop is just 1 year old.. I want to try a format.. I will insert the CD (but wont allow it format)and observe if the screen clears up the I will be sure its not a hardware problem.. Do you think I should try this? Do you have any other suggestion?

choose4me:

There are no options for more dates.. I dont know what else to do.. I have a feeling it is a software related problem..The laptop is just 1 year old.. I want to try a format.. I will insert the CD (but wont allow it format)and observe if the screen clears up the I will be sure its not a hardware problem.. Do you think I should try this? Do you have any other suggestion?

Yes you can try that, but be very careful you do not install windows just boot from cd and let it load to the installation start place and observe the screen. It's okay you troubleshoot from software first before moving to hardware.

gememerald:


Yes you can try that, but be very careful you do not install windows just boot from cd and let it load to the installation start place and observe the screen. It's okay you troubleshoot from software first before moving to hardware.

Ok thanks.. Will try that first and let you know

choose4me:


Ok thanks.. Will try that first and let you know

Ok

Plz how much is hardware

Bowofola213:
Plz how much is hardware

What hardware?

Hello Engineer, I just bought a second hand hp elite book 12.1" the hard disk keeps misbehaving. Some times it will not load d Os. Or in the middle off a work, it will just say no disk. It seems that small HDD is scarce. Can you help me out?

Gud day bro. Pls hw can I install my hp laserjet 2430 printer on Windows 8.1 64 bits. I av tried installing it with Universal printer driver and manual installation but av nt goten a desirable result. Pls can u help me out?

sunnyboi:
Hello Engineer, I just bought a second hand hp elite book 12.1" the hard disk keeps misbehaving. Some times it will not load d Os. Or in the middle off a work, it will just say no disk. It seems that small HDD is scarce. Can you help me out?

Can you open the laptop? if you can, then open it and look for where the hard drive is connected to the board, carefully remove it and clean the terminals, also check where hdd is sitting if it is not properly padded use papers or something that does not conduct electricity to pack it properly. Give me feed back.

ridwanlekan:
Gud day bro. Pls hw can I install my hp laserjet 2430 printer on Windows 8.1 64 bits. I av tried installing it with Universal printer driver and manual installation but av nt goten a desirable result. Pls can u help me out?

did you upgrade your windows to 8.1? did any CD came with the printer?

gememerald:


Can you open the laptop? if you can, then open it and look for where the hard drive is connected to the board, carefully remove it and clean the terminals, also check where hdd is sitting if it is not properly padded use papers or something that does not conduct electricity to pack it properly. Give me feed back.

If this does not solve it, you may need to buy replacement hard disk drive for your system. Just take the former one along and use it to find the replacement at computer village (if you are in Lagos).

my hp G60 is not displaying anything when i put it on and my caps lock and num lock doesnt blink and my fan is rolling but its not booting up and my system is on

pls help
my system does not start again it shows a message dat ops not found
this happened b cos d battery is bad so it was not shut down correctly so when i started it it shows d message

ayomidearo:
my hp G60 is not displaying anything when i put it on and my caps lock and num lock doesnt blink and my fan is rolling but its not booting up and my system is on

This could be RAM or motherboard issues
Try changing the ram and give me feedback. (NB: not neccessarily buying ram, just find and use to test it)

adedeham:
pls help
my system does not start again it shows a message dat ops not found
this happened b cos d battery is bad so it was not shut down correctly so when i started it it shows d message

What actually happened is that your hard drive is not properly fitted into its connector maybe it shook, therefore try and open the system, then refix or refit the harddrive properly into its connector. FEED ME BACK

gememerald:


This could be RAM or motherboard issues
Try changing the ram and give me feedback. (NB: not neccessarily buying ram, just find and use to test it)

ok i will buh if ram has issues shouldnt it blink the caps lock 3 times?

ayomidearo:
ok i will buh if ram has issues shouldnt it blink the caps lock 3 times?

it may not signify like that, different things may be wrong with the ram. also try and press "ctrl" + "alt" + "del" repeatedly (not minding whether it comes on or not) when you start it and see what happens.

gememerald:
it may not signify like that, different things may be wrong with the ram. also try and press "ctrl" + "alt" + "del" repeatedly (not minding whether it comes on or not) when you start it and see what happens.

nothing is still working.. Maybe i will need to change d ram

ayomidearo:
nothing is still working.. Maybe i will need to change d ram

ok do that, but the fan is rolling?

gememerald:


ok do that, but the fan is rolling?

yes the fan is rolling

pls my dell laptop is working well b4 the HDD crash. and i change HDD perfectly. but wen I finish installed window 8 wit other software there is no problem. then I shurt it down. after sometimes I on it again hoping to charge d battery and continue using it. then I discover dt my battery is charging but not increasing. pls wht could cos dis. pls help me oo

ayomidearo:
yes the fan is rolling

Change the ram, you can also clean up dusts on the motherboard using soft brush. FEED ME BACK

brightlomo:
pls my dell laptop is working well b4 the HDD crash. and i change HDD perfectly. but wen I finish installed window 8 wit other software there is no problem. then I shurt it down. after sometimes I on it again hoping to charge d battery and continue using it. then I discover dt my battery is charging but not increasing. pls wht could cos dis. pls help me oo

Check the dell battery meter, did you turn on "stop battery charging" ? If that is the case then uncheck the box.

gem emerald:


This could be RAM or motherboard issues
Try changing the ram and give me feedback. (NB: not necessarily buying ram, just find and use to test it)

Have similar problem with my laptop,but b/4 d incident
>I use the system over night downloading some stuffs,d next morning..I stop using it by 6am...then I hibernate d system..so that I can access my last pages(browser).when I switch on my system
>Fast forward to 5pm in d evening,I switch on my system
...Turn it on..It switch on,show my desktop then went off by itself
>I switch it on again...after loading windows..it then show blue screen
>Switch it on again only for it to show samsung logo without showing d bios,did it d second time same thing
>Then,switch d system on only for it to show....d on light..no display..and d system is on..but no cab and key or wifi light on..fan not working
>Took it to an enginner(enugu)....he said Display IC problem...
>Took it to another in lagidi..he check d ram..no display..he heat a particular stuff near d CPU..no display..fan not working..change d CPU..same story...
Later he saw a burn IC..said it can not be change..motherboard..gone



What to ask.....do the system still have hope or d board is completely dead

evening sir.. i get issue wit my system
after browsing, i came back to watch movie n den d system started an endless update.. den i got angry n removed d battery..
booting d system again.. n trying to log in, i got this first error message..;
" User Profile Service service
failed the sign- in. User Profile cannot be
loaded.".
more anger after few more trials den i removed d ba3 n used my screw driver n removed d harddisc n Ram n refixed it.. den a new problem arose.. screen is black..
i had screen issues before but an ic using leaded wire, was shunted.. it was a backlight issues that time n before d repair u cud notice diming of d light n if u look closely d display graphic... but now..
on onning its pure black n doesnt dim.. d caplock light is normal, n on closing d laptop it refuses to sleep as usual.. am suspect a flex-like connection but i need ur expert advice.. thankx.. n d system is hp630 tanx again

Vstuffs:


Have similar problem with my laptop,but b/4 d incident
>I use the system over night downloading some stuffs,d next morning..I stop using it by 6am...then I hibernate d system..so that I can access my last pages(browser).when I switch on my system
>Fast forward to 5pm in d evening,I switch on my system
...Turn it on..It switch on,show my desktop then went off by itself
>I switch it on again...after loading windows..it then show blue screen
>Switch it on again only for it to show samsung logo without showing d bios,did it d second time same thing
>Then,switch d system on only for it to show....d on light..no display..and d system is on..but no cab and key or wifi light on..fan not working
>Took it to an enginner(enugu)....he said Display IC problem...
>Took it to another in lagidi..he check d ram..no display..he heat a particular stuff near d CPU..no display..fan not working..change d CPU..same story...
Later he saw a burn IC..said it can not be change..motherboard..gone



What to ask.....do the system still have hope or d board is completely dead

You have to change the motherboard

PipSurgeon:
evening sir.. i get issue wit my system
after browsing, i came back to watch movie n den d system started an endless update.. den i got angry n removed d battery..
booting d system again.. n trying to log in, i got this first error message..;
" User Profile Service service
failed the sign- in. User Profile cannot be
loaded.".
more anger after few more trials den i removed d ba3 n used my screw driver n removed d harddisc n Ram n refixed it.. den a new problem arose.. screen is black..
i had screen issues before but an ic using leaded wire, was shunted.. it was a backlight issues that time n before d repair u cud notice diming of d light n if u look closely d display graphic... but now..
on onning its pure black n doesnt dim.. d caplock light is normal, n on closing d laptop it refuses to sleep as usual.. am suspect a flex-like connection but i need ur expert advice.. thankx.. n d system is hp630 tanx again

As per the sleep on closing the lid, it could be power options settings

OR

There is a button which the laptop lid (I.e cover) presses when you cover the laptop, that button is probably disconnected on the board and that is why it doesn't sleep when you close it.

The update files and some critical files may have been corrupted in the process of you just hard shutting the system.

You need to be patient so you don't even spend more time in fixing problems as compared to the time spent in waiting for the update to finish.

And let me ask which one is pure black is it the screen??

Are you based in Abuja? And do you want to learn how to make Cake, Pastries, and Cook different delicacies? Then, contact Hosom Catering Services for your Home Training, at affordable prices. For more enquiries, call 08169448336.

gememerald:


You have to change the motherboard

Thanks bros

gememerald:

As per the sleep on closing the lid, it could be power options settings

OR

There is a button which the laptop lid (I.e cover) presses when you cover the laptop, that button is probably disconnected on the board and that is why it doesn't sleep when you close it.

The update files and some critical files may have been corrupted in the process of you just hard shutting the system.

You need to be patient so you don't even spend more time in fixing problems as compared to the time spent in waiting for the update to finish.

And let me ask which one is pure black is it the screen??

i didnt change d power option before d incidence.. and yes its d screen dat is pure black now it doesnt show anytin or color at all.. i was tinking its d flex like connector. tan

PipSurgeon:
i didnt change d power option before d incidence.. and yes its d screen dat is pure black now it doesnt show anytin or color at all.. i was tinking its d flex like connector. tan

Can you troubleshoot ? It maybe different problems ? Check the screen connection to the board.

eniolajan:
Are you based in Abuja? And do you want to learn how to make Cake, Pastries, and Cook different delicacies? Then, contact Hosom Catering Services for your Home Training, at affordable prices. For more enquiries, call 08169448336.

This thread is not for things like this please kindly do your advertisements in the right place.