embarassedThis is the error I get from the f8 stock ROM I downloaded from :

Brom error s_da_sdmmc_write_failed(3149)

any solution, all who downloaded that f8 stock ROM from got same problem

anyone here using tecno f8 should help me with his phone backup

Laide20:
The only download source I can find is google drive and redirected me to it . if you have another download source other than google drive could you please paste the link. Thanks

hello, you mentioned us in a Previous comment. having a device issue?

My gionee p4.
Keep pressing itself
Sometimes when it is on
But there is no single crak in D sensor

great664:
Thanks fashrobbin1 for this thread

I was trying to flash my Motorola Droid Razr Maxx Xt912 4.1.2 to upgrade it to a custom Rom 5.0, but it couldn't go through, I have bricked it many times but was able to restore it back using Safestraps 3.75, I google and read somewhere that I should install another CWM to be able to port the rom and it should be Bootstraps, but it was mentioned that if you are using safestraps before u should uninstall it so as not to get a bootloop problem , which I did and I downloaded the fucking bootstraps and boot into Recovery, then Backup so I can restore if anything happens, after backup I decide to reboot and it shows "ENCRYPTION UNSUCCESSFUL" I should reset the phone which I did so many times and it stills there.....

I have downloaded and flash with the firmware using RSDLite and Utility tool by Maccgroff but still same.

Is there a way I can be able to fix it? Can I install apk (safestraps) so I can restore from my previous backup? Is there a way to install the app on bricked phone?

PS: if you have the motorola Droid razr Maxx xt912 can you please upload your firmware for me to try it too.

Thanks for reading my long sermon


Dani4tech or Nafikowa can you pls help me with your Motorola firmware to restore my phone? Pls Man

sorry bro...i'm no longer using the fone..u can check out XDA

Dani4tech:


sorry bro...i'm no longer using the fone..u can check out XDA

not able to flash with the one posted in XDA even with Droid Utility too

pls help my tecno A+ cannot browse with 3g only edge.when I switch to 3g my network bar disappear only when I switch to edge that the network bar will come back.pls help my 3g is not working

Laide20:
Please I have a problem with my tecno D5 I forgot to backup the default recovery mode now I flashed the wrong custom recovery and it's not booting into recovery.

download sp flash tools Download it here
download vcomm drivers Download it here or else it wont detect your phone it will only charge your phone
how to set up drivers
https://www.youtube.com/watch?v=ztm6QE_qiZc
download CWM for d5 http:///7037456/https://drive.google.com/file/d/0B9srKhKuVIMnelNWY1JVNUF2RlU/edit?usp=sharing
scatter file for tecno d5 https://forum..com/thread-88.html
move the scatter file and the recovery image to same folder now, after done with all, launch spflash tools import the scatter file .txt then you will see many options like this from the screenshot below.`
since you want to fix recovery mode only then, you need to tick only recovery
now, import the recovery image click on start at the top make sure you remove your battery while you click start.
Now finally put your battery you should see a yelow icon loading and eventualy it should turn green
congratulations CWM is back to your device.
NOTE: i dont have much time to post if you also have a dead device you need to follow the same procedures just that you will need to look for the correct preloader,boot image, recovery image,system and others then you flash it using the same methhod then your dead phone will be back to life.

dolphinheart:
Hope you dnt mind this slight off topic post. Just bought a new galaxy tab 4 and the most informations I put on the sd card keep getting currupted. Tried different sd cards with same result. Is this a general problem ?

try flashing or wiping your phone

charleya:
pls help my tecno A+ cannot browse with 3g only edge.when I switch to 3g my network bar disappear only when I switch to edge that the network bar will come back.pls help my 3g is not working

Hi! Pls check whether your APN is set correctly first. Thank you!

Frankenstein:
My tecno F7 got bricked. When I tried to flash it, the process got stuck midway. Now, it won't power up. Please, is there a detailed guideline on how to fix this problem?

Hi! You can take your phone to our Carlcare Service Center, our colleagues there will help you solve this problem. If you need us to send you the contact information of our service center, pls tell us the city, state and country you're living in now. Thank you!

Carlcaresophia:
Hi! You can take your phone to our Carlcare Service Center, our colleagues there will help you solve this problem. If you need us to send you the contact information of our service center, pls tell us the city, state and country you're living in now. Thank you!

Hello dear my tecno h7 won't boot
Phone been off for days won't power
My questions
1 will calcare repair it after have lost the reciept of the phone?
2

fashrobbin1,
goodday,please can i flash my custom rom using windows 7 with sp flash tool

fashrobbin1:
try flashing or wiping your phone

Would flashing not affect the warranty on the tab ?

charleya:
pls help my tecno A+ cannot browse with 3g only edge.when I switch to 3g my network bar disappear only when I switch to edge that the network bar will come back.pls help my 3g is not working

try flashing the stock ROM bro

dolphinheart:

Would flashing not affect the warranty on the tab ?

not at all bro

VJSMILESS:
fashrobbin1,
goodday,please can i flash my custom rom using windows 7 with sp flash tool

the post has been updated since I saw that you plp are having brick problem

youngchopper:

Hello dear my tecno h7 won't boot
Phone been off for days won't power
My questions
1 will calcare repair it after have lost the reciept of the phone?
2

hello, is your phone rooted?
do you have a pc? if yes reply me fast so that I can post you with the procedures to wake it back to life

kizibaba:
My gionee p4.
Keep pressing itself
Sometimes when it is on
But there is no single crak in D sensor

have u try performing a hard reset on it??

maxibrainz:
anyone here using tecno f8 should help me with his phone backup

is your phone bricked

maxibrainz:
embarassedThis is the error I get from the f8 stock ROM I downloaded from :

Brom error s_da_sdmmc_write_failed(3149)

any solution, all who downloaded that f8 stock ROM from got same problem

which app did u use in flashing??

Tolu95:
my gionee m2 is been brick..nt powerin up atall...d fone is in jellybean but d rom i want to download is in kitkat.....n pls help me out

the preloaded is corrupt that y follow the new method I posted you will have your device fixed

AwesomeRomeo:
Pls how can I unbrick my HTC T528w that was bricked by ifonts?(barbie.ttf) It hangs on boot logo, its rooted and it can boot to recovery. USB debugging was not enabled. I didn't back up the stock rom b4 it bricked. I have downloaded a custom rom for d device. Pls help. Tanx.

is the cwm on zip format?? or scattered??

abbeyboyz54:
Samsung Galaxy S3 is not showing screen lock....please help me

try wiping the phone

amhackdee:
My camera was given this erroe "Camera can't connect" I do the restore factory settings, that does help.
Yesterday I notice that it has disappear finally. I checked the application thinking if it was disable or so, it can't be found there also.
How do I fix this?

your camera disappeared?? change the rom that the best thing the camera.apk is corrupt

UncleDeeee:
I upgraded my galaxy s3 without backing it up and now the network has disappeared. Anything I can do?

you have to look for the stock ROM bro check if you cab get1 here http://galaxys3root.com/galaxy-s3-rooted-stock-roms/

donxaqius:
Pls my tecno f6 got bricked I scatter file to wake it up pls help..

try wiping the phone and see if it will power on if not, then start preparing for spflash tools flashing

EHITZ:
Please all gurus in the house help me. Since I gave my samsung galaxy grand neo to samsung care for fixing, it has since developed a problem, the screen responds at the slightest touch, and even clicks randomly on the things I did not intend to click on. In the same vain, it takes some part of the screen a hard time to respond. Help

maybe the ROM they installed has faults

great664:
Thanks fashrobbin1 for this thread

I was trying to flash my Motorola Droid Razr Maxx Xt912 4.1.2 to upgrade it to a custom Rom 5.0, but it couldn't go through, I have bricked it many times but was able to restore it back using Safestraps 3.75, I google and read somewhere that I should install another CWM to be able to port the rom and it should be Bootstraps, but it was mentioned that if you are using safestraps before u should uninstall it so as not to get a bootloop problem , which I did and I downloaded the fucking bootstraps and boot into Recovery, then Backup so I can restore if anything happens, after backup I decide to reboot and it shows "ENCRYPTION UNSUCCESSFUL" I should reset the phone which I did so many times and it stills there.....

I have downloaded and flash with the firmware using RSDLite and Utility tool by Maccgroff but still same.

Is there a way I can be able to fix it? Can I install apk (safestraps) so I can restore from my previous backup? Is there a way to install the app on bricked phone?

PS: if you have the motorola Droid razr Maxx xt912 can you please upload your firmware for me to try it too.

Thanks for reading my long sermon


Dani4tech or Nafikowa can you pls help me with your Motorola firmware to restore my phone? Pls Man

am interested in your phone kindly leave me with a mail so that we can get it fixed

kolexis:
pls help ooo....bricked my tecno f5 nd am trying to flash recovery via sp flashtool buh its nt workin....its jux showing red bar nd telling me failed

that means the scatter file is not placed in the same folder with the boot img and others or maybe your phone is not communicating well with your PC try uninstalling the drivers and installing the. back