₦airaland Forum

Amono:
your timing marks are off by a few degrees. Have your timing set properly. P.s there was nothing wrong with your previous can sensor.

gateleo:
Hello all,

I have a Toyota camry 1999 4 plugs engine. The check light came up recently and I took the car for scanning and this code 'P0340 Camshaft position sensor A circuit Bank 1 or Single sensor' . I Google this code went to my Mechanic that I want my camshaft sensor to be replaced. Though, I don't have difficulty in starting the ignition and the car did not stall. Now we replace the the sensor and the check light disappear. I used the car through out yesterday morning and afternoon but at evening the check light was on again.

I did another scan and the same code P0340 came up again.. please what could be wrong again? Is it that the replaced sensor is faulty again or I we missing out something.... please I need your support on want to do or check. ..

mayor2013:
Did you get a known good cam sensor? By the way the second pix showed is the speed refernce mark sensor

mayor2013:
Did you get a known good cam sensor? By the way the second pix showed is the speed refernce mark sensor

Amono:
your timing marks are off by a few degrees. Have your timing set properly. P.s there was nothing wrong with your previous can sensor.

Amono:
in simpler terms sir. (crank shaft position sensor)

depair:
if u had ur timing belt replaced or worked on it possible the timing is not properly set. your picture is the sensor

depair:
yea the engine ll start

conyema12:
Am currently having the same code on my 2006 toyota rav4
I changed the O2 sensor and spark plugs cos my scanner pointed to that direction, drove it for 30mins and the P0010 ( Camshaft position actuator circuit/ open bank 1

conyema12:
Am currently having the same code on my 2006 toyota rav4
I changed the O2 sensor and spark plugs cos my scanner pointed to that direction, drove it for 30mins and the P0010 ( Camshaft position actuator circuit/ open bank 1

gateleo:
@depair n Amono, the timing was readjusted today and the check light went off but came up again after 30 minutes of driving. I rescaned and the same code P0340 was up.

Please what can I do again. More contributions and advice pleaseeeeee...

GAZZUZZ:
tell your mechanic to open up the timing belt cover, if it falls short of this, code might come back. Also check if cam sensor is loose or dangling
[img]http://t0.gstatic.com/images?q=tbn:ANd9GcRn5mt41wAOhD26IYkFKPzW9oL0sBhfgcqa6gkbJyguzzQ_VDrz[/img]

Abdomox:
Please what was the solution to this P0340

Blackbishop:
Boss apart from the timing, baba go for a new sensor it will save you this stress.

From experience the toks will work briefly, I changed one 2 days ago from a customer from Ibadan and it was display timing over retarded. I went for ladipo own and after driving from my workshop to where he's staying in lag a drive of over 2hours according to him, the check engine light came up again

The next day I scanned again and it was the same code, I remove and went for a new one and since then the light is not back again .

GAZZUZZ:
What vehicle?

Blackbishop:
Boss apart from the timing, baba go for a new sensor it will save you this stress.

From experience the toks will work briefly, I changed one 2 days ago for a customer from Ibadan and it was display ing timing over retarded. I went for ladipo own and after driving from my workshop to where he's staying in lag a drive of over 2hours according to him, the check engine light came up again

The next day I scanned again and it was the same code, I remove and went for a new one and since then the light is not back again .