junate:

How many channels r free to air N plz I will need d tracking frequency

track with 11474v27500,then blindscan,make sure this t.p is not less than 60%!

michealblakky:
Sony is working well on 68.5 if u don't have the key ask for it

Please can you share with me the key to Sony ESPN on 68.5e.

consumingfire:


Please can you share with me the key to Sony ESPN on 68.5e.

take little steps back and read tru d previous pages...u ll get it

@Chinedu7, compliment of the day.l was able to track the 2.4m dish to certain extent except for the fact that, when l used the C band lnb with plate. as primary and the one without the plate as secondary on top of the primary akin to your pic.l was unable to get apstar , the maximum signal strenght l got was 73% on 4064H 19850 no matter how hard l trick the lnb.ln view of this l decided to use the lnb without plate as primary although l got LSO 20 but could not get Sony @66e and of course the celebrated apstar.Please from your wealth of experience what do think l am doing wrong or rather what is amiss with the whole set up.

baggiosne:
take little steps back and read tru d previous pages...u ll get it

I used that unfortunately, it still remained scrambled. Please if you have a working one post it.l really need it.

How To Watch Dstv ,Gotv Startime And Others Free On Android Phone Without internet you can now watch Free-to-Air DVB-T2 TV anywhere you go using your Android Phone and Pad device. Enjoy Free to view DVB-T2 channels without using your airtime, 3G/LTE or any internet connection. DVB-T2 is a portable tuner that receives live, high-quality broadcast TV to your Android Phone or Pad. Dvb-T2 is a digital tv channels which are broadcast by your local antenna,it can be Freeview, Fta, Paytvor by your local state tv digitally. Android version 4.0 upward is qualified to use USB Dvbt2 pad TV. HOW IT WORK go to Google play store and download pad tv software launch it, wait for installation process and scan channels,now connect THE USB TV TUNER PAD TV to your Android phone USB port within a second the TV menu is now visible on your Android phone and you can now watch any tv channels broadcast in dvbt2 without Internet. Features: – Watch live FTA TV and change channels – record FTA TV shows and store in your mobile device – Playback your recorded TV shows – View EPG to check for TV Program Guide • Advanced TV Application – Watch DVB-T2 TV on Android Phone/Pad with USB OTG • Rewind and Fast Forward live TV shows with Time shifting recording • Electronic Program Guide (EPG) and Supporting HDTV Receiving • Automatic TV channels searching • Create favorite channels for convenient watching • High sensitivity under low signal broad casting area.

consumingfire:


I used that unfortunately, it still remained scrambled. Please if you have a working one post it.l really need it.

ok..,google it ,and u ll neva ask anytin abt any keys again

Can I get tips on how to easily track ses5, 7e and 7w using multitv or 16e as point of reference
90cm dish @ Abuja

Name of Satellite: Intelsat 20 @ 68.5° E Sony KIX Sony SIX SD Transponder: 3900 H 29999 (MPEG2/PowerVu) ECM KEY0: 8F 4E 38 FA 67 74 FF ECM KEY1: D1 65 6B C5 65 A9 E6

consumingfire:
@Chinedu7, compliment of the day.l was able to track the 2.4m dish to certain extent except for the fact that, when l used the C band lnb with plate. as primary and the one without the plate as secondary on top of the primary akin to your pic.l was unable to get apstar , the maximum signal strenght l got was 73% on 4064H 19850 no matter how hard l trick the lnb.ln view of this l decided to use the lnb without plate as primary although l got LSO 20 but could not get Sony @66e and of course the celebrated apstar.Please from your wealth of experience what do think l am doing wrong or rather what is amiss with the whole set up.

From what you just said, it means your dish is not balanced. Before you can get this right, you need to first balance your dish with Ku-Band in the middle as primary. Track 20w and Mark the pole, track 16e and Mark the pole, take the dish to the middle of the two marked positions, after that lock the dish. Now finally attempt to track SES 5E, don't adjust the locked base, only adjust vertically you will get SES 5, and when you do you can check both East and West positions if the still there, you can now attach the C-bands and no position will disappear.

Chinedu7:

From what you just said, it means your dish is not balanced. Before you can get this right, you need to first balance your dish with Ku-Band in the middle as primary. Track 20w and Mark the pole, track 16e and Mark the pole, take the dish to the middle of the two marked positions, after that lock the dish. Now finally attempt to track SES 5E, don't adjust the locked base, only adjust vertically you will get SES 5, and when you do you can check both East and West positions if the still there, you can now attach the C-bands and no position will disappear.

Hello Chinedu7, how can I connect more than 4 satellites (7) to 4922a through diseqc switch? Thanks.

please i need an installer the guy that installed my dish only got all the starsat channels and some christain station with AMC portugal. but i want MBC channels am using a stong decoder 4950H and 90cm dish and i stay in ajah lekki. he said i need a 1meter dish somebody help me out here.
08023181499 or ikemobi@yahoo.com.

ugotuf:

Hello Chinedu7, how can I connect more than 4 satellites (7) to 4922a through diseqc switch? Thanks.

Buy 8 in 1 diseqc switch, it is in the market.

ikemobi:
please i need an installer the guy that installed my dish only got all the starsat channels and some christain station with AMC portugal. but i want MBC channels am using a stong decoder 4950H and 90cm dish and i stay in ajah lekki. he said i need a 1meter dish somebody help me out here.
08023181499 or ikemobi@yahoo.com.

Get a 1m dish sir

ikemobi:
please i need an installer the guy that installed my dish only got all the starsat channels and some christain station with AMC portugal. but i want MBC channels am using a stong decoder 4950H and 90cm dish and i stay in ajah lekki. he said i need a 1meter dish somebody help me out here.
08023181499 or ikemobi@yahoo.com.

get one meter dish

Chinedu7:

Buy 8 in 1 diseqc switch, it is in the market.

if you buy 8 in 1/diseq,connect your dishes in each port provided. Then go to your receiver dish setting,choose d one that has 1 to 16,then connect from 1 to 8 save and go back to scan.

Chinedu7:

From what you just said, it means your dish is not balanced. Before you can get this right, you need to first balance your dish with Ku-Band in the middle as primary. Track 20w and Mark the pole, track 16e and Mark the pole, take the dish to the middle of the two marked positions, after that lock the dish. Now finally attempt to track SES 5E, don't adjust the locked base, only adjust vertically you will get SES 5, and when you do you can check both East and West positions if the still there, you can now attach the C-bands and no position will disappear.

Thank you for your quick response.l can always count on you.

Chinedu7:

From what you just said, it means your dish is not balanced. Before you can get this right, you need to first balance your dish with Ku-Band in the middle as primary. Track 20w and Mark the pole, track 16e and Mark the pole, take the dish to the middle of the two marked positions, after that lock the dish. Now finally attempt to track SES 5E, don't adjust the locked base, only adjust vertically you will get SES 5, and when you do you can check both East and West positions if the still there, you can now attach the C-bands and no position will disappear.

Thank you for your quick response.l can always count on you.

[color=#990000][/color]

@ Chinedu, for the skewness of the LNB, which position(O'clock) is better for both ku nd Cband for motorised set-up jst has ur case? secondly, do you receive ses 6 in the west nd what percentage is ur SP24 on NSS 12 to the east? Thanks.

Chinedu7:

From what you just said, it means your dish is not balanced. Before you can get this right, you need to first balance your dish with Ku-Band in the middle as primary. Track 20w and Mark the pole, track 16e and Mark the pole, take the dish to the middle of the two marked positions, after that lock the dish. Now finally attempt to track SES 5E, don't adjust the locked base, only adjust vertically you will get SES 5, and when you do you can check both East and West positions if the still there, you can now attach the C-bands and no position will disappear.

@Chinedu, your contribution is super and more grease to your elbow. My question is, do you have to remove the jack to do this or is there a way to carry out this adjustment without removing the jack? Presently with my 3m Dish I cannot get Apstar 76.5e with the following dish setting 1. Ku Band LNBF (middle) as primary, C-Band LNBF (without dielectric plate on top) for IS 20 @ 68.5e for Sony Entertainment, IS 17 @ 66e for Sony Kix etc. & C-Band LNBF (with dielectric plate placed below) for Citizen, Sport 24 etc but my problem is that I cannot get Apstar so pls help out.

Like i said weeks ago, Euro 2016 would be available on some platforms.

Euro cup is almost like WC, that some FTA are granted partial or full rights.

For GOTV subscribers, some matches would be available live

For startimes subscribers, some matches woulf be available FTA on NTA sport 24 FTA on startimes.

Other FTA channels details on satellite would be provided soon

Chinedu7:

Buy 8 in 1 diseqc switch, it is in the market.

Thanks a lot. I know there is an 8-in-1 diseqc, how to configure it is the issue here or is it plug and play?

calis2:
if you buy 8 in 1/diseq,connect your dishes in each port provided. Then go to your receiver dish setting,choose d one that has 1 to 16,then connect from 1 to 8 save and go back to scan.

Thank you bros. I will give this a try tonight.

Truly1:


@Chinedu, your contribution is super and more grease to your elbow. My question is, do you have to remove the jack to do this or is there a way to carry out this adjustment without removing the jack? Presently with my 3m Dish I cannot get Apstar 76.5e with the following dish setting 1. Ku Band LNBF (middle) as primary, C-Band LNBF (without dielectric plate on top) for IS 20 @ 68.5e for Sony Entertainment, IS 17 @ 66e for Sony Kix etc. & C-Band LNBF (with dielectric plate placed below) for Citizen, Sport 24 etc but my problem is that I cannot get Apstar so pls help out.

Yes, for an already tracked dish, you can do adjustment with Jack on the dish but for maximum flexibility you need to remove your jack. If your Apstar is missing, it could be as a result of two things, 1 your dish alignment isn't good enough, 2 the position of the Cband lnbf is not central. If you find it difficult, then you can try to bring the cband lnbf closer to the KU band lnbf.

ugotuf:

Thanks a lot. I know there is an 8-in-1 diseqc, how to configure it is the issue here or is it plug and play?

Go to dish settings, put off diseqc 1.0 and put on diseqc 1.1. Now you will have option 1 - 16 to choose from but for 8-in-1, you can only use option 1-8. Thanks

nis70:
@ Chinedu, for the skewness of the LNB, which position(O'clock) is better for both ku nd Cband for motorised set-up jst has ur case? secondly, do you receive ses 6 in the west nd what percentage is ur SP24 on NSS 12 to the east? Thanks.

My Jack can't reach ses6 because it's not super heavy duty. So, I have actually not tried it. For cband lnb skew, I always use 9 o'clock, though it depends on the sat I want to prioritise in the setup. For Ku-Band 9 or 3 o'clock, again it depends on my priority. I am in Onitsha, so my MTN on 66E is poor, it difficult with 2.4 here.

Ismy5000:

get one meter dish

Call or whatsapp 08060003831

Chinedu7:

My Jack can't reach ses6 because it's not super heavy duty. So, I have actually not tried it. For cband lnb skew, I always use 9 o'clock, though it depends on the sat I want to prioritise in the setup. For Ku-Band 9 or 3 o'clock, again it depends on my priority. I am in Onitsha, so my MTN on 66E is poor, it difficult with 2.4 here.

Thanks bro, more power to ur elbow.

ben1daEbiri:
track with 11474v27500,then blindscan,make sure this t.p is not less than 60%!

Please can you help me with Sony and HBO keys on IS20

Avedon:

Please can you help me with Sony and HBO keys on IS20

.sony keys Again?

Chinedu7:

Go to dish settings, put off diseqc 1.0 and put on diseqc 1.1. Now you will have option 1 - 16 to choose from but for 8-in-1, you can only use option 1-8. Thanks

Thank you so much bros, I appreciate.