₦airaland Forum

Chelseafan1:
Done!!! The rmp seems very high when I turned on the engine.

the throttle body will need readjustment to decrease the power.

nurey:
the throttle body will need readjustment to decrease the power.

OK, I'll try to reduce it.

Work is done now, leaving it to dry.

The mechanic said I should buy this and pour into the tank, is it necessary?

Chelseafan1:
The mechanic said I should buy this and pour into the tank, is it necessary?

at all

Chelseafan1:
Lol, na one mechanic dey spray am so. We don almost empty the can sef, the sides of the throttle body were all sprayed.

We just dey spray anything sprayable.

toor, it might have no major effect but I have never used up that much on one injector mouth before......


lolz

Chelseafan1:
OK, I'll try to reduce it.

Work is done now, leaving it to dry.

got this at a VW thread for idle relearn of the throttle body of ur golf4

i've always done the following, not sure if it's 100% correct but it seems to work:
-disconnect both battery terminals
-connect the leads together for 5 minutes or so
-reattach to battery
-turn key to on position, but don't start it. leave for 5 minutes or so.
-then start the car, but DO NOT touch the gas. let it idle for 10 minutes.
-then drive.

nurey:
got this at a VW thread for idle relearn of the throttle body of ur golf4

i've always done the following, not sure if it's 100% correct but it seems to work:
-disconnect both battery terminals
-connect the leads together for 5 minutes or so
-reattach to battery
-turn key to on position, but don't start it. leave for 5 minutes or so.
-then start the car, but DO NOT touch the gas. let it idle for 10 minutes.
-then drive.

Which one is lead, where do I connect them to, I wanna try this.

obekediamondfuto:
toor, it might have no major effect but I have never used up that much on one injector mouth before......


lolz

my oga, you've been very helpful.

God bless your heart.

Still leaving it to dry

GAZZUZZ:
you don turn lagosian?

Honestly thought 3mb meant 3 megabytes. Haha

You guys can have ur Lagos. I just can't

nurey:
got this at a VW thread for idle relearn of the throttle body of ur golf4

i've always done the following, not sure if it's 100% correct but it seems to work:
-disconnect both battery terminals
-connect the leads together for 5 minutes or so
-reattach to battery
-turn key to on position, but don't start it. leave for 5 minutes or so.
-then start the car, but DO NOT touch the gas. let it idle for 10 minutes.
-then drive.

Chelseafan1
Remember to disconnect fans is connected to run direct.

nurey:
got this at a VW thread for idle relearn of the throttle body of ur golf4

i've always done the following, not sure if it's 100% correct but it seems to work:
-disconnect both battery terminals
-connect the leads together for 5 minutes or so
-reattach to battery
-turn key to on position, but don't start it. leave for 5 minutes or so.
-then start the car, but DO NOT touch the gas. let it idle for 10 minutes.
-then drive.

Chelseafan1
Remember to disconnect fans if connected to run direct.

timifakay:
Chelseafan1
Remember to disconnect fans if connected to run direct.

They are connected to run once I turn on key

Una too make sense for this Car section.

O boy, it seems to be normal now o.

It's kind of stable now.

God bless Oga Nurey, Timifakay and Diamondfuto...

Make ds thing just stable ooo.

I wish I could make a video and show y'all.

Chelseafan1:
O boy, it seems to be normal now o.

It's kind of stable now.

God bless Oga Nurey, Timifakay and Diamondfuto...

Make ds thing just stable ooo.

I wish I could make a video and show y'all. D

Haa! You dont want God to bless me too?

Alvin007:
Haa! You dont want God to bless me too?

Lol, I'm so sorry my brother, na ur blessings go plenty pass. That was an unintended omission. No vex.

Una don turn this thread to something else.

Demeanors you all are!!!

Dan, please forgive all of them and upload current situation abeg.

What's burning cooking on this thread?

timifakay:
What's burning cooking on this thread?

It’s a German breed bread.

Alvin007:
It’s a German breed bread.

Is the bread refusing change or change is refusing the bread?

Upgrade from version 1.6 to version 2.0 __% complete

timifakay:
Is the bread refusing change or change is refusing the bread?

Upgrade from version 1.6 to version 2.0 __% complete

__% Complete..(beep beep)...error..(cannot complete installation)....rebuild and re-install previous engine.

una dey here dey make noise. we don fit d engine finish.... d car dey fire anyau now ehn chai... shout out to all d Kazeems out there... pressing spoil since 1876

OgaKazeem:
una dey here dey make noise. we don fit d engine finish.... d car dey fire anyau now ehn chai... shout out to all d Kazeems out there... pressing spoil since 1876

Try not to get burnt.

dem no dey tell person dt one... as we fit d engine finish i don close. i no kno whether e start sef hehehe

So, na so Dan take abandon this thread for una ehn? Dan!!! Come and update us o!!! I must to witness this transformation from autobot to decepticon

dan my man, even if una Don finish the car completely still come and update us now.... we might have solid solutions......

please dan baba C

update us abeg

obekediamondfuto:
dan my man, even if una Don finish the car completely still come and update us now.... we might have solid solutions......

please dan baba C

update us abeg

now na una dey rush Dan ooo hehehehe ,���

dancok hw far naw?
I'm worried, hope all is well and the car is "cool"?

obekediamondfuto:
dancok hw far naw?

I'm worried, hope all is well and the car is "cool"?

the car i drove to seme and back, the car is ok.

dancok:
the car i drove to seme and back, the car is ok.

God pass Dem. This golf don go international.

sweetwarriboy:
God pass Dem. This golf don go international.

Cheeeeeeeeeeee.