koolengrtimmy:


Do you need someone reliable who can handle your job perfectly?

yes

mufutau55:


Peter 0803 575 1201
Mathew 0803 845 5219
Same people.

Hajji M.

thank you for the information. how much should i budget for a sqm of floor tiling. i have about 700+ sqm to tile..

aonag:


thank you for the information. how much should i budget for a sqm of floor tiling. i have about 700+ sqm to tile..

happy new year sir

At Zainab Ventures, we sell and instal P.O.P materials. We located at 47B Idi-Fan Along IITA Moniya Road Ibadan Oyo State. Our telephone number 08080892325. Our price is avoidable.

twinskenny:
happy new year sir

Hello. Happy New Year!

keepingmum:
Whom can i contact to get a 3D model for a 3bed bungalow? Does the site hv to be seen first beforehand?
Its on a 50 x 50 land and was acquired as an uncompleted building.....the roofing, fencing et al isnt done yet

I stay in Abj,

Good afternoon nairalanders.Please I need advice concerning a property I am interested in.The houses have been built but I noticed that the internal walls are not made with blocks but a material that looks like fibre reinforced precast .it has tiny wire mesh in it.( I saw a small hole somewhere and saw the material)
The house has window that are aluminum sliding but no burglary.How do I put burglary in the wall since the wall is not made of cement blocks?

aghaibiam:
Good afternoon nairalanders.Please I need advice concerning a property I am interested in.The houses have been built but I noticed that the internal walls are not made with blocks but a material that looks like fibre reinforced precast .it has tiny wire mesh in it.( I saw a small hole somewhere and saw the material)
The house has window that are aluminum sliding but no burglary.How do I put burglary in the wall since the wall is not made of cement blocks?

The burglary can be fixed using bolts and nuts.

@juell can you please enlighten me further on the use of bolt and but?
How do I access the back and if it's bolted won't an intruder loosen the bolt and enter or do I have to crack and wall up?

aghaibiam:
@juell can you please enlighten me further on the use of bolt and but?
How do I access the back and if it's bolted won't an intruder loosen the bolt and enter or do I have to crack and wall up?

can u share the pictures?

Thank you for this piece @HSLBroker....

For someone who intend to use POP all round, is it still necessary to use 2*2? Heard 2*3 can be used in stead of 2*2 since the whole house is going to have POP.. This means their will be little/or no nogging, however the 2*3 will be arranged in such a way to do the work of 2*2...

HsLBroker:
same to you sir, i really don't think i understand your question but what is actually certain is that softwood are use for temporary work on site, like decking, lintel, pillars or column, they don't last more than a year.

Hardwood remain hardwood, but there are various form of their hardness, itara, ayin, akun wood is harder than ogborugboru, menaina. The harder woods are good for 2x4, 2x6, 3x4, why the less hard wood like menaina, ogborugboru are good for 2x2 and 2x3, the reason is simply that, at that sizes they won't crack, wish can damage the woods.

2x2 woods are mainly use for ceiling noggin, but if you are installing stone coated roofing sheets to cover your roofing wooden carcass, full size 2x2 is suitable too for your purling(note that I said full size 2x2 not solo) because the full sizes 2x2 is what most saw mill now saw or sell for 2x3.

2x3 is mainly use for purling or latt according to how the carpenters call it. (Purling or latt is the vertex level point on the roof where the roofing sheets will be lay)

2x4 is use for the tie beams, joining or bracing, Ridges and finally ridges construction on the roofing carcass

2x6 is for king post

3x4 is use for the wall plate

of course everyone should know facial board is 1x12 but for aesthetic design on the roof it will be reduce to 1x10.

Facial board is mainly use when there is no parapet attach to the block roofing level.

Thanks

Successbay:
Thank you for this piece @HSLBroker....

For someone who intend to use POP all round, is it still necessary to use 2*2? Heard 2*3 can be used in stead of 2*2 since the whole house is going to have POP.. This means their will be little/or no nogging, however the 2*3 will be arranged in such a way to do the work of 2*2...

you are welcome sir, I'm grateful for the opportunity to contribute, 2x3 solo size is same as 2x2 full size, so surely, it can be use sir.

Thank you chief, your response is highly appreciated..

HsLBroker:
you are welcome sir, I'm grateful for the opportunity to contribute, 2x3 solo size is same as 2x2 full size, so surely, it can be use sir.

Successbay:
Thank you chief, your response is highly appreciated..

you are welcome once again Boss.

aghaibiam:
@juell can you please enlighten me further on the use of bolt and but?
How do I access the back and if it's bolted won't an intruder loosen the bolt and enter or do I have to crack and wall up?

The bolts will be fixed on the bottom and top of the window opening. After that the nuts can be welded to the bolts if u're afraid buglars might loosen them.

Hello house,

Please what's the current market price of 0.55mm and 0.45m of longspan.

Thanks.

Good to be back to continue learning

Abdomox:
Hello house,

Please what's the current market price of 0.55mm and 0.45m of longspan.

Thanks.

I can see you are warning up for the roofing! May Baba God see you through.

Happy new year to all good people of this threads

joycluv:
I can see you are warning up for the roofing! May Baba God see you through.

amen

joycluv:
I can see you are warning up for the roofing! May Baba God see you through.

Amen. Thank you.

aonag:

thank you for the information. how much should i budget for a sqm of floor tiling. i have about 700+ sqm to tile..

I think I paid N450 per sqm some years ago.
I am not sure now but it should be between N350-N450 per sqm for good tiler. You must negotiate for better prices o.

Hajji M.

mufutau55:


I think I paid N450 per sqm some years ago.
I am not sure now but it should be between N350-N450 per sqm for good tiler. You mus negotiate for better prices o.

Hajji M.

ok. the guy told me 700 for floor. i just told him il call him bck

aonag:

ok. the guy told me 700 for floor. i just told him il call him bck

N700 per sqm?

Hajji M.

mufutau55:


N700 per sqm?

Hajji M.

That's much
Tilling is 300-350 per sqm
But a professional tilers would collect at most #500 anything above that is too high

Though the distance between his location and the site location is also a factor but at most 500# is the highest.

Abdomox:
Hello house,

Please what's the current market price of 0.55mm and 0.45m of longspan.

Thanks.

.45mm #1,180 permtr
.55mm #1,590 permtr

Call/Whatsapp 08085310359

https://www.nairaland.com/3364135/roofing-sheets-cost-various-types/45

Depending on the location but I can do that for you within the range of 400 and 450 per square meter

aonag:


thank you for the information. how much should i budget for a sqm of floor tiling. i have about 700+ sqm to tile..

For your 3D and architectural design also for structural design and analysis. Also call us for site supervision and BOQ( cost analysis) We're always here to serve you better .. 07069214721

Abdomox:
Hello house,

Please what's the current market price of 0.55mm and 0.45m of longspan.

Thanks.

if u are in Lagos, we can give u, 1100 for 0.45 , 1,500 for 5.5

mufutau55:


N700 per sqm?

Hajji M.

yes

IDconstruction:
For your 3D and architectural design also for structural design and analysis. Also call us for site supervision and BOQ( cost analysis) We're always here to serve you better .. 07069214721

No advertisement here, please.

Hajji M.