DZTech:
hi sir
I loosened d screw to d end but d small gen output is still 375-380v
d 2kva stab only regulates to 347v.
pls how do I resolve dis?

If not still reduce, then reduce from the black screw on the cabrator, if is still high then, is either ur govnor is bad or need setting, but adjust it from the black rubber screw from the cab first,

bobeefc:
pls o. help recommend which brand to buy that can carry fridge easily. 3.8kv with Key starter and tyres? thank you and the price range also

Type of fridge?

sherify2011:


Pls attend to this

Why do u want to adjust the valve?

Pls if have not replied ur request or complain, old re-post or quote me

enochogaga:


Why do u want to adjust the valve?

Because there's enormous noise from there.

Hello Enoch.
I would like to get a generator that would power 1 deep freezer (Scanfrost), One pumping machine (though they will not be in use at the same time. But whilst either is in use, i would like to power one TV, fans and light bulbs in the house.

I need a good generator that would power these. What can you recommend? A generator with button or key start, low fuel consumption, and little or no noise.
My thoughts are on Maxi or Honda products, but I am open to suggestions on very good and durable (5yrs or more) qualities. Price is also a deciding factor

Please is this Lutian lt 1800 copper coil a good gen?

Please is this Lutian, lt 1800 copper coil a good gen?

abishaddy:
Please is this Lutian, lt 1800 copper coil a good gen?

it's same as other 1kva gen... if you want 1-1.5kva gen then go for thermocool

Good evening sir

Bought sumec 3000 today, but when i on it, the gen sound as if there is no fuel and so does the light.
I have called the seller, he said the gen is not set.

What is the cause?

sherify2011:


Because there's enormous noise from there.

Tapping noise is the only noise that from there

basotik:
Good evening sir

Bought sumec 3000 today, but when i on it, the gen sound as if there is no fuel and so does the light.
I have called the seller, he said the gen is not set.

What is the cause?

Reduce it from the firing screw under the fuel tank

abishaddy:
Please is this Lutian, lt 1800 copper coil a good gen?

Gen having a copper on a generator make the gen last of does that make it original?

jadepinkett:
Hello Enoch.
I would like to get a generator that would power 1 deep freezer (Scanfrost), One pumping machine (though they will not be in use at the same time. But whilst either is in use, i would like to power one TV, fans and light bulbs in the house.

I need a good generator that would power these. What can you recommend? A generator with button or key start, low fuel consumption, and little or no noise.
My thoughts are on Maxi or Honda products, but I am open to suggestions on very good and durable (5yrs or more) qualities. Price is also a deciding factor

Honda is not a China product, and very expensive, Maxi is a China product, trust Me have handle mostly all the China product, is only sumec that still serve

Hello engr. How do make my elemax generator noiseless?

Walexz02:
Hello engr. How do make my elemax generator noiseless?

buy soundproof gen

Thanks Boss

I went there to change it to lutian lt3990e

#83,000

well done oga engr.
my tiger generator has refused to start. I bought new starting coil nd yet its not start up.kindly respond asap

Good day engineer ,I am about purchasing a tiger generator what should I look out for..I am hearing something about copper and aluminium what does it mean?

Good day Prof. About adjusting the fuel regulator on the carburetor, how much should one tighten it. Can I tighten it to the end?? I use a sumec 1800

Momoney77:
Good day Prof. About adjusting the fuel regulator on the carburetor, how much should one tighten it. Can I tighten it to the end?? I use a sumec 1800

Yes u can

basotik:
Thanks Boss

I went there to change it to lutian lt3990e

#83,000

Very good gen. I bought mine last week and I've been enjoying it so far. I think the fuel consumption should be better though. 1 litre for one hour 30 minutes but expected 2 hours for one liter. I don't want to reduce the firing of the engine or tightneing the fuel tank like Prof said. How's the fuel consumption?

enochogaga:


Yes u can

Does it have any negative effect on the generator? I've been scared to do that on my lutian lt3990e.

Prof, my generator repairer wants to sell a 3 year old lutian lt3990e to me for 25,000 but he said I will need to change the ring and piston since the gen is already bringing out black smoking.
He said will change the rings and piston and some other minor maintenance of the gen for an additional 5,000 making a total of 30,000.
The battery of the gen is also bad (he told me the battery costs 4,000) so only manual starting is possible currently. Will you advise me to go ahead with the purchase or run for my life . Thanks

cc:
enochogaga
lilclin

enochogaga:


If not still reduce, then reduce from the black screw on the cabrator, if is still high then, is either ur govnor is bad or need setting, but adjust it from the black rubber screw from the cab first,

bros!
Tnx for ur assistance o!
after sdjustment, d voltage dropped to 255 from 375-380!
God bless ur hustle oooo!

enochogaga:

Yes u can

Oshey

sherify2011:


Why do you want to alter this on your generaror?
Black is use to increase/decrease the engine speed while the 'gold' is use to 'moderate' the fuel consumption of the generator.

pls the gold should I lose the screw or tighten it to reduce fuel consumption?

jeraw:
Prof, my generator repairer wants to sell a 3 year old lutian lt3990e to me for 25,000 but he said I will need to change the ring and piston since the gen is already bringing out black smoking.
He said will change the rings and piston and some other minor maintenance of the gen for an additional 5,000 making a total of 30,000.
The battery of the gen is also bad (he told me the battery costs 4,000) so only manual starting is possible currently. Will you advise me to go ahead with the purchase or run for my life . Thanks

cc:
enochogaga
lilclin

I would suggest you add money to the 30k and get a new gen

Rikon:
pls the gold should I lose the screw or tighten it to reduce fuel consumption?

If it is consuming much, tighten. If it's lacking adequate/necessary fuel supply, lose to optimum required level. Just do it gradually be observant as you do it

sherify2011:


If it is consuming much, tighten. If it's lacking adequate/necessary fuel supply, lose to optimum required level. Just do it gradually be observant as you do it

thank you

Hello professor,
I want to first thank you for your selfless service to this forum.

My budget for a generator is 40,000 naira.
After doing a little research I am a bit interested in Senwei(formerly Elepaq)

What is your experience regarding their 1.8 KVA gens like ECO2990S, ELE3200S, ECO2200S, SPG3200S.

All are 1.8kva and in my budget range.

If you do not advise that I buy Senwei, what other cost effective brand would you suggest.

taiwoakin:
Hello professor,
I want to first thank you for your selfless service to this forum.

My budget for a generator is 40,000 naira.
After doing a little research I am a bit interested in Senwei(formerly Elepaq)

What is your experience regarding their 1.8 KVA gens like ECO2990S, ELE3200S, ECO2200S, SPG3200S.

All are 1.8kva and in my budget range.

If you do not advise that I buy Senwei, what other cost effective brand would you suggest.

Senwei is RUBBISH USELESS GOOD FOR NOTHING BUNCH OF PACKAGED RECYCLED INFERIOR METAL!