Ok, Madam. You can drop how your hubby can be contacted and we will see how it goes.

salisuammy:

Good evening sir. Please my husband is into aluminum fabrication and is based in Abuja. I sent you a mail now. He can travel if the location is outside Abuja.

n3xt:


At 23 - 26k, it’s good value for the money.


____
Below are heavier doors with hefty price tag.

This soup contains stock fish,beef,round about, snail,dried fish. The one i saw doesn't come with frame

Can any builder who has plenty of experience with roofing tell me the difference between Sumo brand of Zinc and Royal?

Please it's important

Hello everyone, let me just do this for the 1st time here, like one of ogas builder use to asked

Check this our ongoing bakery/office building.
Which door do you think is the best btw these two locally made doors

The door will be fix at the frontage of the building (up and down opening)

...Modified.
1st is stainless door , locally made
2nd is steel antirust locally made door 130k

Gokoyer1401:
Ok, Madam. You can drop how your hubby can be contacted and we will see how it goes.

God bless you sir. 08079425571 or Whatsapp 08079749032.

rotecch77:
Hello everyone, let me just do this for the 1st time here, like one of ogas builder use to asked

Check this our ongoing bakery/office building.
Which door do you think is the best btw these two locally made doors

The door will be fix at the frontage of the building (up and down opening)

I’m for the Israeli security door. The other door is too fine for a contemporary build.

boay:

About 1560blocks. I assumed you will put a gate

Thanks boay!

n3xt:


According to the wonderful self builder block cement quantity estimator on kobocity.com, you’d require about 1486 pcs of block for the fence.

Total Perimeter = 56.4m (excluding 3.6m gate)
Fence Height = 2.73m (9ft)

Self building made easy with kobocity construction calculators. Visit https://www.kobocity.com/d/52-kobocity-self-builder-tool-block-cement-qty-estimator

This is quite a professional response!

Thanks a million n3xt!!

n3xt:


At 23 - 26k, it’s good value for the money.


____
Below are heavier doors with hefty price tag.

Are these doors locally made, what is the average cost of each of them

dongc:
Happy Christmas to everyone celebrating....a friend is looking to build this...he is curious is this a good plan?....please scrutinize where necessary ..I am listening....
Thank you in advance

More critics to this design?

Gokoyer1401:
No problem.
I don't have access to my PM anymore. So, you can send me your email ID here and I will contact you.

rockofagesaluminium@gmail.com
Call or whatsApp 08069609983
Thanks

kopell:
Are these doors locally made, what is the average cost of each of them

Yes they are. I can’t tell how much it’ll cost now. Also reaching the maker is the most difficult part.

He’s one of the most sought door maker in Nigeria but he’s very hard to get.

Olumide Falana, Geometro Creatives

nnadychuks:
use metal doors for the front and back doors. Then try wooden panel doors shown below. Making of these kind of doors shouldn’t exceed 16k but based on the fact that you live outside Delta you might get it at a different price, probably higher...

Thanks man, I'll look out for them.

n3xt:


I’m for the Israeli security door. The other door is too fine for a contemporary build.

Thanks bro
Same thought here

maybe you should show the first door's front view as well to show same orientation for comparison. those that know the doors may be able to tell it apart sha.

The first/top door looks to make a big statement and quite loud while the second may appear professional and more suited for a business (bakery). The location of the project could also be a factor in the choice.

If i had the option, I'll go for a third choice altogether.

Cheers

rotecch77:
Hello everyone, let me just do this for the 1st time here, like one of ogas builder use to asked

Check this our ongoing bakery/office building.
Which door do you think is the best btw these two locally made doors

The door will be fix at the frontage of the building (up and down opening)

...Modified.
1st is stainless door , locally made
2nd is steel antirust locally made door 130k

n3xt:


According to the wonderful self builder block cement quantity estimator on kobocity.com, you’d require about 1486 pcs of block for the fence.

Total Perimeter = 56.4m (excluding 3.6m gate)
Fence Height = 2.73m (9ft)

Self building made easy with kobocity construction calculators. Visit https://www.kobocity.com/d/52-kobocity-self-builder-tool-block-cement-qty-estimator

Very nice

JustCryptos:


Thanks boss. In terms of durability and function, would you recommend American panels?

I am particular about them because they were one of the cheapest from my market survey.

1. Wood - #23k without frame and key
2. American Panel - 23k with frame
3. PVC - 17k

I will give you the attached skin door for 45,000 with installation.

the door is a skin door,. framed with imported pine wood.

door only.....15k

door with frame and Architraves ...30,000

the skin door

door with frame Architraves and lock...35,000

door,frame, Architraves,lock and installations...45,000.

check my thread for contacts and more details

davodyguy:

Good evening.

What's your current price for 10mm and 12mm?

Evening sir, N263, 000 for 12mm and 16mm, 10mm @N273, 000 plus delivery to any where in Lagos and Ogun sir

godello:
..

i get this first one you can rich me with this no https:///2347087953771

davodyguy:


I always tell people this.

A survey plan on its own is not a 'valid' title, either registered or unregistered.

A survey plan only shows you the dimension and location of a land, its coordinates and may be the beacon numbers.

5 of us can have a survey plan drawn in our names by 5 different land surveyors on a single plot.

What you should do is to ask the vendor if he/she has a valid title that confirms he owns the land.

if he doesn't have other than a receipt (which itself does not confirm ownership, cause I can also issue you a receipt on a land that doesn't belong to me) take the survey plan to the Office of the Surveyor General of Oyo State, and Chart it first to confirm if the land is free from acquisition and if under acquisition, is it committed or can be ratified by you obtaining consent to Survey.

Start here first

Thank you for this explanation.

The seller was a member of a cooperative which purchased and shared the land. They passed all checks. The only issue is they had planned to get a global C of O but now lack the funds to do it.

kopell:
Are these doors locally made, what is the average cost of each of them

you can get the doors between 90k to 120k, depends on the designs and level of finishing.

quality wood polish are used on such job, and an experienced spraying man for quality delivery.

this is not the 'kiakia' type of work because the wood may need some time to dry up to get a perfect finishing when polished.

rotecch77:
Hello everyone, let me just do this for the 1st time here, like one of ogas builder use to asked

Check this our ongoing bakery/office building.
Which door do you think is the best btw these two locally made doors

The door will be fix at the frontage of the building (up and down opening)

...Modified.
1st is stainless door , locally made
2nd is steel antirust locally made door 130k

megacontrol:
maybe you should show the first door's front view as well to show same orientation for comparison. those that know the doors may be able to tell it apart sha.

The first/top door looks to make a big statement and quite loud while the second may appear professional and more suited for a business (bakery). The location of the project could also be a factor in the choice.

If i had the option, I'll go for a third choice altogether.

Cheers

I stand with megacontrol on this, the first door looks too fanciful for a bakery, look for something more solid.

Go for lekki scheme 2.

It may look slower to develop at the moment with low occupancy rate but it won't take much longer before it explodes (yeah I know we've been waiting for a long time) considering what's going on in and around the ogombo road at the moment.

Abijo GRA may appear ready for occupancy right now but the distance between those two locations isn't child's play, therefore consider proximity to Ajah and Lekki.

Location is everything!

edoman2016:
@n3xt
Between Abijo GRA scheme and Lekki scheme 2, which has better prospect for residential house? I need to decide on one out of the two to buy.

megacontrol:
Go for lekki scheme 2.

It may look slower to develop at the moment with low occupancy rate but it won't take much longer before it explodes (yeah I know we've been waiting for a long time) considering what's going on in and around the ogombo road at the moment.

Abijo GRA may appear ready for occupancy right now but the distance between those two locations isn't child's play, therefore consider proximity to Ajah and Lekki.

Location is everything!

@edoman2016

If you’re developing to rent:

Long Term: Lekki Scheme II
Short Term (with immediate gain): Abijo GRA

If you intend to sell with high ROI (maybe terrace flat or nice MDUs):

Long/Short Term + High ROI: Lekki Scheme II
Long Term: Abijo GRA


______

If you can get something closer to development in Lekki Scheme II, I believe LS II is a winner all the time.

n3xt:


Yes they are. I can’t tell how much it’ll cost now. Also reaching the maker is the most difficult part.

He’s one of the most sought door maker in Nigeria but he’s very hard to get.

Olumide Falana, Geometro Creatives

Do you guys have his contact?

rotecch77:
Hello everyone, let me just do this for the 1st time here, like one of ogas builder use to asked

Check this our ongoing bakery/office building.
Which door do you think is the best btw these two locally made doors

The door will be fix at the frontage of the building (up and down opening)

...Modified.
1st is stainless door , locally made
2nd is steel antirust locally made door 130k

Bro, don't even think of using all those shiny metal doors. Please use that Israeli security door. Very matured. How much is it in the market now?

Please guys can anyone advise on the genuineness of the 50 years warranty been offered on stone coated roofing sheets? Money if you can chipped in it will be highly appreciated

n3xt:


According to the wonderful self builder block cement quantity estimator on kobocity.com, you’d require about 1486 pcs of block for the fence.

Total Perimeter = 56.4m (excluding 3.6m gate)
Fence Height = 2.73m (9ft)

Self building made easy with kobocity construction calculators. Visit https://www.kobocity.com/d/52-kobocity-self-builder-tool-block-cement-qty-estimator

This is very good stuff

michlins:
see what I mean here.

Aside the mix ratio, ensure that you use good rods on the foundation

is this the normal H rod for an overhead tank? this looks very thin. I want to do one and I assume there must be something thicker than this right?