3.5kva 24v Famicare inverter still available, #115,000. Call/WhatsApp us on 08168986461

200AH Genus tubular battery now available, #115,000. Call/WhatsApp us on 08168986461

200Ah 24v felicity lithium battery still available, #430,000. Call/WhatsApp us on 08168986461

anjilgreat:
Is it possible to connect it to a regular plug like the below so that I can connect it to a socket when ironing?

Cc: ojeysky, ceaser and others . Thanks in anticipation

I think this is 12v DC iron. It won't thrive on 230v AC power supply.

I have that type of pressing iron in store for about 3 years now. I've only used it on direct battery connection on maybe two occasions before I retired it. I anticipate connecting it directly to a dedicated 18v/150w panel port one of these days to see if it will be finally useful in that set up.

abbeymighty:
please what is the maximum solar panel that I can connect? I have 4 * 200ah battery.
Thanks

In the manual max recommended is 600w. Although I've seen some connect up to a 1000w with no issues so far the max Voc [75v] and 25a current is not exceeded.

IYGEAL:


I'd take better pictures and scan the QR codes later tonight.

Is the capacity of the BMS written on it?
I got the entire arrangement at upwards of 300k.

This pack of yours isn't looking too good. First worrisome sign is the different colours of the qr code stickers. When that happens, it points to possibility that cells from different production batches were used and at worst case scenario, grade B or grade C cells were salvaged and used. But I'm just assuming, so let's hope I'm wrong.

It seems you missed the comments where a contact was dropped. The guy uses good cells (eve cells) for his packs. Actually so far over the past one year, from him I've gotten 3 units 24/100ah packs (around 280k excluding shipping) and 2 units 12/100ah packs.

His recent builds, according to him, incorporates ant wireless BMSes.

Trippledots:


Idk if this is still relevant, but are your night loads all energy efficient? If you can replace non energy efficient gadgets with energy efficient ones, it will really help.

I am running two sets of used100ahr/12v & a 150ahr all parallel system. Bought different times from different sellers.

My charging isn't very optimized but my load on them is so light that the batteries are still going strong 2yrs+

Note that during the dayi am not at home so daytime load is zero.

My night loads are all efficient. The challenge is that during holidays my children don't get to sleep early.So light demand is a bit higher than day time and utility availability is unpredictable to charge the batteries except I use gen from 7pm to say 11pm.I want to get rid if using gen totally.

I have decided to retain my 200 ah 24volts solar for day time( I am changing the batteries) and do another 12v setup for my night use paralleling 3 units of of 200ah batteries.This will only work from 7pm to 5am .In between these hours I am sure utility supply would be available for minimum of 4 hours and if not,utility is guaranteed from 5am daily to 12noon.I believe this can charge the batteries for night use. I might decide to add panels later but that is not in the immediate although I have a spare mppt controller but I think that would be a waste considering the system is only for periodic use.

Namzy:

In the manual max recommended is 600w. Although I've seen some connect up to a 1000w with no issues so far the max Voc [75v] and 25a current is not exceeded.

Thanks bro

Available @ discount prices (Brand new) -- Lagos
MidNite MNPV6 Combiner box --- #55,000
MidNite SPD 300VDC --- #50,000
Schneider SCP --- #90,000
Schneider Combox --- #80,000

Limited stock. Cheers.

earthrealm:

Great news.
Whats the distance panel to cc?.
8s1p?.....u using a hybrid inverter?

Guess you mean absorb, most cc, bulk voltage isnt editable, only float and absorb

Yes, SMK 3000W hybrid. Bulk voltage is adjustable.

Distance is about 12 metres or so.

ojeysky:


Folks quote my moniker wrongly so sorry if I don't respond. To your question, from all indication it seem you inverter does not have the float bug? Since that is the case I will set bulk at between 27.6 and .8 while float will remain at 27v.
When you make that settings check the inverter to confirm if it passes the 27v while charging

The silent y before s is probably also physically silent

I was going to make these adjustments but it looks like I have carelessly fried my new hybrid pet.

So I was going to shorten the PV cable last night but forgot to switch off the inverter. Breakers I ordered are yet to arrive so there is no breaker between the inverter and PV. There was a loud sparkling noise the moment I put a screw driver to unscrew the PV.

Sent it to repairs but I'm guessing the board is gone and I might be on the look out for a new 3.5kva hybrid.

ceaser:


* Are the cells used for the pack new cells?
* DANGER - 23.7v as LVD cutoff for the pack isn't advisable. Lithium though more than Lead acid is usually forgivable of deep discharges, it still has undesirable deleterious effects on the life span.

I'll advice you try 24.4v LVD if you still insist on juicing it a little more on daily basis.

The cells don't look new, so they are probably used.

I'd adjust the LVD going forward

ceaser:


This pack of yours isn't looking too good. First worrisome sign is the different colours of the qr code stickers. When that happens, it points to possibility that cells from different production batches were used and at worst case scenario, grade B or grade C cells were salvaged and used. But I'm just assuming, so let's hope I'm wrong.

It seems you missed the comments where a contact was dropped. The guy uses good cells (eve cells) for his packs. Actually so far over the past one year, from him I've gotten 3 units 24/100ah packs (around 280k excluding shipping) and 2 units 12/100ah packs.

His recent builds, according to him, incorporates ant wireless BMSes.

These are good deals really. Although I have no need for extra storage at the moment, I'd like to deal with him next time around.

IYGEAL:

I was going to make these adjustments but it looks like I have carelessly fried my new hybrid pet

So I was going to shorten the PV cable last night but forgot to switch off the inverter. Breakers I ordered are yet to arrive so there is no breaker between the inverter and PV. There was a loud sparkling noise the moment I put a screw driver to unscrew the PV.

Sent it to repairs but I'm guessing the board is gone and I might be on the look out for a new 3.5kva hybrid.

sorry about that. but the boards are available for sale in Lagos.. i think i saw someone post some for sale @a solar energy Facebook page.

Valto:
sorry about that. but the boards are available for sale in Lagos.. i think i saw someone post some for sale @a solar energy Facebook page.

Is it Solar Republic? Can you post a link to the page please

IYGEAL:


Is it Solar Republic? Can you post a link to the page please

not solar republic.. i will find it.

- open-box Victron Quattro 48/5000/70 (5kVA 48VDC) - ₦780,000

- Victron BlueSolar MPPT 150/60 - ₦250,000

- Victron BlueSolar MPPT 150/70 - ₦280,000

- Victron SmartSolar MPPT 150/60 - ₦270,000

- Victron SmartSolar MPPT 150/70 - ₦300,000

- Victron VE.Direct 375VA 48VDC inverter (ultra low idle consumption but without charger) - ₦60,000

- Fangpusun display (for inverters and chargers) - ₦20,000

- Midnite SPD 300V ACM surge protector - ₦80,000

- Midnite SPD 300V AC surge protector - ₦50,000

- Midnite SPD 300V DC surge protector - ₦50,000

- Midnite SPD 600V DC surge protector - ₦60,000

- Midnite MNPV8HV-DISCO 4X disconnect/combiner box - ₦360,000


- MC4 connectors

- MC4 splitters/combiners

- Midnite 250 Classic KS


WhatsApp/Call O8O239O23O5

Greetings house,
Will a 2pcs of 300watts solar panel with a charge controller power a 1hp water pump directly by bypassing the connection of a battery bank?
Is it doable during a hot sun?

alien1:
Greetings house,
Will a 2pcs of 300watts solar panel with a charge controller power a 1hp water pump directly by bypassing the connection of a battery bank?
Is it doable during a hot sun?

Don't think so, even connecting the solar panels to the charge controller without battery will fry it, don't know about dc water pumps tho

alien1:
Greetings house,
Will a 2pcs of 300watts solar panel with a charge controller power a 1hp water pump directly by bypassing the connection of a battery bank?
Is it doable during a hot sun?

No standalone cc, can do what you are asking for
Unless the sumo id Dc, it may work if you line up even the smallest battery bank to the cc, such as the small 12v 7ah battery used for generators


A hybrid inverter, with batteryless mode function can carry loads without battery.
Sorotec hybrid inverter can do this easily

alien1:
Greetings house,
Will a 2pcs of 300watts solar panel with a charge controller power a 1hp water pump directly by bypassing the connection of a battery bank?
Is it doable during a hot sun?

First the combined power from the panels will be insufficient to power a 1hp pump, secondly, unless you are using a DC powered pump don't even attempt it with AC pumps

Please can 600w. Solar panel charge 4* 200ah battery (2p2s) with hybrid inverter

alien1:
Greetings house,
Will a 2pcs of 300watts solar panel with a charge controller power a 1hp water pump directly by bypassing the connection of a battery bank?
Is it doable during a hot sun?

is d pump ac/DC or just ac pump

2v 1000AH Agisson battery available (fairly used), #70,000. Call/WhatsApp us on 08168986461

Installation ongoing at Ado-Ekiti by Engr larry, thanks for your steady patronage sir.

Call/WhatsApp us on 08168986461 for your solar equipments, such as; solar panels, solar batteries, lithium batteries, charge controller, cables, etc.

justcallmenuel:
2v 1000AH Agisson battery available (fairly used), #70,000. Call/WhatsApp us on 08168986461

Desirable battery to covet!!!But charging them is a big issue!!!

omotoda:


Desirable battery to covet!!!But charging them is a big issue!!!

No be lie. But there are battery rectifiers that charges it very well.

omotoda:


Desirable battery to covet!!!But charging them is a big issue!!!

Deye with 195amps charging current, will breeze through this under 6hrs.
Deye na baba for men wey sabi, wey hol bar join.
Sorotec na for men wey sabi, wey no wan sp3nd unecessary bar on basic sh, it

earthrealm:


Deye with 195amps charging current, will breeze through this under 6hrs.
Deye na baba for men wey sabi, wey hol bar join.
Sorotec na for men wey sabi, wey no wan sp3nd unecessary bar on basic sh, it

195amps charging current That's monstrous!!!

200AH 24v (3.5kwh) still available in quantity, #430,000. Call/WhatsApp us on 08168986461

5kva 48v Mopower inverter available, #270,000. Call/WhatsApp us on 08168986461

Sorry about your inverter going bad but the scenario you explain feels rather weird to me.

The PV wasn't say energized like when the sun was up ....so power wasn't suppose to be coming in.

I have been to site with no PV disconnect for conventional charge controller and disconnecting the PV while operating " though bad" never had a fireback or otherwise .

My educative guess is that the PV input and BATTERY might have a kinda common bus .... So maybe on removing the cable some tiny strands bridge the +ve and -ve.

Just my opinion. .....

IYGEAL:


The silent y before s is probably also physically silent

I was going to make these adjustments but it looks like I have carelessly fried my new hybrid pet.

So I was going to shorten the PV cable last night but forgot to switch off the inverter. Breakers I ordered are yet to arrive so there is no breaker between the inverter and PV. There was a loud sparkling noise the moment I put a screw driver to unscrew the PV.

Sent it to repairs but I'm guessing the board is gone and I might be on the look out for a new 3.5kva hybrid.