Concrete block machine can process all kinds of new type materials in industrial scrap: sand, stone, fly ash, coal refuse, cinder,
slag, ore slag and pearl rock etc, for example hollow building block, blind hole bricks and standardize bricks etc.
Special features :
1.reasonable designing, compact structure, directional vibration, brake with adjustable frequency, low energy
consumption, no need to lie carrier by manpower, greatly reduce the labor intensity.
2.press from up and down, strong ramming strength, suitable to produce highstrength block, and the products can
be directly piled up to 35 layers after shaping.
3.it can produce various types of blocks with different moulds.

For more information, please visit: http://www.queenbrick.com/QT12-15-automatic-brick.html
Contact: Ms Queen
Web: http://www.queenbrick.com

Descriptions of QT8-15 Block Making Machine:
The block making machine QFT8-15 (8 stands for the production quantity of 8 blocks "400x200x200mm" per mold, 15 stands for the cycle time is 15 seconds) has the production output of 14,400-19,200 blocks (400x200x200mm) or 150-204 cubic meters for one day (8 working hours). As the molds are changeable, the block making machine is able to produce different types of blocks/bricks. This is one kind of medium size of block making machine.

Main Technical Specifications of QT8-15 Block Making Machine:
Dimension 6800x2090x3000mm
Rating pressure 21MPa
Vibration Table vibration
Vibration frequency 2800 - 4500r/min
Pallet size 1100x680mm
Cycle time 12-25sec.
Power 43.88kW
Weight 9840kg
Main Features of QT8-15 Block Making Machine:
1. Super-strong steel structure, made of extensive imported original parts, ensuring more stability and reliability for the main machine body.
2. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, ensure the best operation effect.
3. High-efficient and super-strong vibration system, computer-control flow pressure of the hydraulic system, realize vertically synchronous vibration, frequency conversion, and braking, with synthetic output compounded with double vibration sources, thus greatly increase product compactness and mold-box service life.
4. The cloth system adopts semi-closed screen reticular rotational feeding unit to feed materials forcedly, with evenness and even speed, ensuring product intensity.
5. Fitted with special hydraulic loading unit, readily realize mass and automatic production, saving a great deal of human power, maintenance field, and circulating fund investment.

Block and Brick Models
Items Size(LxWxH) Pcs./Mold Pcs./Hour Pcs./8 Hours One Year (300days) Production
Blocks 390x190x190mm 7.5 1,350 10,800 3,240,000
Porous Bricks 240x115x90mm 20 4,800 38,400 11,520,000
Solid Bricks 240x115x53mm 40 9,600 76,800 23,040,000
Holland Bricks 200x100x60mm 27 3,888 31,104 9,331,200

For more information, please visit: http://www.queenbrick.com/QT8-15-block-making-machine.html
Contact: Ms Queen
Web: http://www.queenbrick.com

Block Making Machine in South Africa

South Africa, officially the Republic of South Africa, is a country located at the southern tip of Africa. It is divided into nine provinces, with 2,798 kilometres (1,739 mi) of coastline on the Atlantic and Indian oceans. To the north of the country lie the neighbouring territories of Namibia, Botswana and Zimbabwe; to the east are Mozambique and Swaziland; while Lesotho is an enclave surrounded by South African territory.
Block and Brick Making Machine in South Africa

South Africa is rich in natural resources. It is one of the world's top 5 mining countries. Gold, platinum group metals, manganese, vanadium, chromium, titanium and aluminum silicate reserves rank first in the world, Vermiculite, zirconium, titanium, fluorspar rank second, Phosphate rank third in the world, Antimony, uranium, rank fourth in the world, Coal, diamonds, lead rank fifth in the world.

The blocks making machines are in great need in South Africa

The President of South Africa Jacob Zuma said on February 9, 2012 that the South Africa government will invest huge amounts of money in infrastructure development in order to create more employment opportunities, and thereby to eliminate poverty. As the largest trading company of blocks making machine, many sets of Queen Machinery Co.,Ltd's block production lines are exported to South Africa.

South Africa Block Machines, Block Making Machines Supplier in South Africa

Features good quatliy, good service and best price, Queen Machinery Co.,Ltd's block making machines are much better than the other South Africa Block Machines. Since 1989. Queen Machinery Co.,Ltd have exported many machines there and got good reputation from the local clients, especially block making machines model QT18-20, QT12-15, QT10-15. Up to now, Queen Machinery Co.,Ltd has become the largest and best block making machiens supplier in South Africa.

For more information, please visit: http://www.queenbrick.com/block-making-machine-in-south-africa.html
Contact: Ms Queen
Web: http://www.queenbrick.com

India officially the Republic of India, is a country in South Asia. It is the seventh-largest country by geographical area, the second-most populous country with over 1.2 billion people, and the most populous democracy in the world. India became one of the fastest-growing major economies; it is considered a newly industrialised country.

Block Making Machine in India, India Block Making Machine

India has the world's fourth largest reserves of coal. The other major nutural resources are: iron more, manganese, mica, bauxite, titanium, chromite, natural gas, petroleum, diamonds, limestone and so on. According to the local requrements, we produce India block making machine, which is the best choice in India.
The best block making machiney in India

Block making machines are in great need in India becuase the India's rapid economic development. In this situation, we design and produce India block making machines to meet the requirements of the India clients. Brick Making Machine in India has the following characters:
1. Taking stone dust, fly ash, slag, mineral slag, sand and water as the raw material
2. Reasonable design, compact body with strong steel and special welding technology.
3. The semi-enclosed distribution system makes the distribution fast and uniform.
4. The advantages are reasonable structural design, safe and reliable operation, good quality of mixing concrete, fast and accurate measurement.

For more information, please visit: http://www.queenbrick.com/block-making-machine-in-india.html
Contact: Ms Queen
Web: http://www.queenbrick.com

Queen Machinery Co.,Ltd is the largest trading company of various of construction machinery. As the key product, QT10-15 block making machine( block machine) is best seller in the Nigeria Market.
Description of QT10-15 brick making machine:
1. QT10-15 brick machine (10 stands for the production quantity is 10 blocks "400×200×200mm" per mould, 15 stands for the cycle time is 15 seconds) has the production output of 14400-19200 blocks (400×200×200mm) or 200-272 cubic meters for one day (8 working hours).
2. QT10-15 can produce various types of hollow blocks, solid bricks, interlocks, pavers, and curbstones, etc.

For more information, please visit: http://www.queenbrick.com/QT10-15-automatic-block.html
Contact: Ms Queen
Email: queenmachinery@gmail.com
Web: http://www.queenmachinery.com
http://www.queenbrick.com

Technology Flow Of Autoclaved Aerated Concrete Block Production Line:
1) First, dose and match measured raw materials;
2) After distributing, feed raw material into pouring mixer to make slurry;
3) Through thoroughly mixing, the slurry is poured to mould;
4) After pre-curing under a certain temperature and time, the block would reach a certain hardness prepare for cutting;
5) Tilting hoister would turn over 90 degree of mould;
6) Then open the mould and separate it from block, and take the block with side plate to cutting cart;
7) The blocks then be cut through the cutter firstly of two vertical sides of block;
Secondly the horizontal cutting;
9) Finally the vertical cutting;
10) After cutting, the block is hanged to trolley with side plate by semi-finished product hoister;

If you want to know more of our aac light weight block production line, please visit: http://www.queenbrick.com/aac-block-machine.html
Contact: Ms Queen
Web: http://www.queenbrick.com http://www.queenmachinery.com

Features of HZS Series of Ready-Mixed Concrete Mixing Plant:
1.Stability and Durability: adapt and apply the most advanced technologies around the world;
2.Reliability: 30 years of experiences in manufacturing concrete mixing plants;
3.Stationary modular structure, fast and easy installation;
4.Sicoma mixer, excellent mixing performance with high efficiency and high productivity;
5.Double computers with double controls, easy operation;
6Excellent environmental protection, dust collection system and anti-noise design.

Specifications of HZS Series of Ready-Mixed Concrete Mixing Plant:
Type HZS60 HZS90 HZS120 HZS180 HZS240
Theoretical Production (m3/h) 60 90 120 180 240
Mixer Type MAO1500/1000 MAO2250/1500 MAO3000/2000 MAO4500/3000 MAO6000/4000
Power (KW) 2×22 2×30 2×37 2×55 2×75
Discharging Capacity (m3) 1 1.5 2 3 4
Aggregate Diameter (mm) 60 80 80 150 150
Aggregate Bin (m3) 13 13 20 30 40
Belt Conveying Capacity (t/h) 300 450 550 650 900
Weighing Accuracy Aggregate (KG) 1200±2% 2000±2% 2200±2% 3000±2% 4200±2%
Cement (KG) 600±1% 1000±1% 1200±1% 1800±1% 2200±1%
Fly Ash (KG) 300±1% 400±1% 400±1% 500±1% 800±1%
Water (KG) 350±1% 500±1% 500±1% 800±1% 1000±1%
Additives (KG) 30±1% 50±1% 50±1% 80±1% 80±1%
Total Power (KW) 85 115 130 170 220
Discharging Height (M) ≥3.8 ≥3.8 ≥3.8 ≥3.8 ≥3.8

For more information of our RMC batching plant, please visit: http://www.queenbrick.com/ready-mixed-concrete-mixing-plant.html
Contact: Ms Queen
Web: http://www.queenbrick.com
http://www.queenmachinery.com

Descriptions of QT6-15 Block Machine:
QT6-15 (6 stands for the production quantity is 6 blocks "400×200×200mm" per mould, 15 stands for the cycle time is 15 seconds) has the production output of 8640-11520 blocks (400×200×200mm) or 120-160 cubic meters for one day (8 working hours). As the moulds are changeable, the concrete equipment is able to produce different types of blocks/bricks.

Main Features of QT6-15 Automatic Block Making Machine:
1. The system equipped with PLC control unit includes safety logical module, producing procedure module and fault diagnosis module. Through human machine interface, the long-distance fault diagnosis function can be achieved, thus operators can handle the system smoothly by simple training.
2. Equipped with 4-poster conducting device and mold unit includes cover-mold and base-mold which pressed by each separated hydraulic transmission device and controlled by synchronization unit. Thus, the system so far so durably.
3. Equipped with especially-designed feeding unit including pendulum fork to remove the raw material effectively and evenly.
4. Equipped with hydraulic transmission unit which assembled of high quality elements manufactured by world famous supplier.
5. Equipped with vibration unit with low frequency condition for vibration and high frequency condition for forming so that products can reach satisfied density and uniformity.
6. The system can produce concrete masonry units with a great many specifications by replacing different molds.

For more information, please visit: http://www.queenbrick.com/QT6-15-block-machine.html
Contact: Ms Queen
Web: http://www.queenbrick.com

Main Features of Excavator QM833:
1、Advanced ESS electronic control system makes the hydraulic system fully utilize the power of engine to improve the working efficiency and save fuel. The machine can work in H (fast mode), S (economic mode) and L (fine mode) to satisfy different working conditions.
2、Reliable and efficient Kawasaki hydraulic system and electronic control system.
3、Powerful engine ensures high working efficiency.
4、Reinforced arm, boom and frame provide longer service life.
5、Comfortable operating environment.
6、Adopt brand rollers and tracks to ensure the service life of undercarriage.
7、Convenient operation, maintenance and repair.

Specifications of Excavator QM833:
Overall width of upper structure 2995 mm
Overall height of cab 3150 mm
Rear swing radius 3405 mm
Overall width 1185 mm
Transport length 11140mm
Boom transport height 3280mm
Track gauge 2590 mm
Track shoe width 600 mm
Undercarriage width 3190 mm
Wheelbase 3700 mm
Overall length of undercarriage 4625 mm
Mini ground clearance 500 mm

For more information of Excavator QM833, please visit: http://www.queenmachinery.com/excavator-qm833.html
Contact: Ms Queen
Web: http://www.queenmachinery.com

Descriptions of QT10-15 Automatic Block Making Machine:
1. QT10-15 brick machine (10 stands for the production quantity is 10 blocks "400×200×200mm" per mould, 15 stands for the cycle time is 15 seconds) has the production output of 14400-19200 blocks (400×200×200mm) or 200-272 cubic meters for one day (8 working hours).
2. QT10-15 can produce various types of hollow blocks, solid bricks, interlocks, pavers, and curbstones, etc.
Main Features of QT10-15 Automatic Block Making Machine:
1. Uses Germany Siemens PLC control system and Siemens Touch Screen.
A. Visualization screen with easy operation;
B. Is able to set up, update and amend the production perimeters, to maximize the production output;
C. Dynamic display of the system's status, automatic trouble shooting and warning notice;
D. Has automatic-locking function, avoiding mechanical accidents caused by operational mistakes;
E. Is able to troubleshoot the machinery via teleservice.
2. Uses high-dynamic proportional and directional valves, which automatically adjust the oil flow and pressure as per specific working requirements, to buffer the hydraulic cylinder when working; uses integrated high-pressure and soft oil pipes, with easy installation;
3. Uses multi-shaft rotating and compulsory feeding, which greatly improves the density and intensity of the blocks, and reduces the feeding time as well;
4. Integrated structure of vibrating and moulding platforms, which reduces the weight of the machine, and improves the vibrating efficiency;
5. Uses one single motor to drive the vibrator via transmission shaft, avoiding the inconsistency of double motors, so as to save the power;
6. Uses double-line aero vibration-proof system, which reduces the vibrating force on the mechanical parts, improves the using lifetime of the machine, and reduces the noise;
7. Maintenance-free hinge bearings on the hydraulic cylinders and driving rods, screwable straps on lever arms for easy exchange of blots, extension of guide bearings for absolutely parallel and tilt lift movement of mould and tamper head;
8. Heavy-duty machine frame, which uses high-intensity steel and advanced heat treatment, is wear resistant.

For more information, please visit: http://www.queenbrick.com/QT10-15-automatic-block.html
Contact: Ms Queen
Web: http://www.queenbrick.com

Descriptions of QT5-15 Block Making Machine:
The block making machine QFT5-15 (5 stands for the production quantity of 5 blocks "400x200x200mm" per mold, 15 stands for the cycle time of 15 seconds) has the production output of 7,200-9,600 blocks (400x200x200mm) or 100-136 cubic meters for one day (8 working hours). As the molds are changeable, the block making machine is able to produce different types of blocks/bricks. This popular medium size of block making machine is the one used by most of our customers.

Main Technical Specifications of QT5-15 Block Making Machine:
Dimension 6600x2090x3000mm
Rating pressure 21MPa
Vibration Table vibration
Vibration frequency 2800 - 4500r/min
Pallet size 1100x560mm
Cycle time 11-25sec.
Power 35.88kW
Weight 9360kg

For more information, please visit: http://www.queenbrick.com/QT5-15-block-making-machine.html or http://www.queenbrick.com

As the largest trading company of block making machine or brick making machines. We produce many kinds of block making machine to meet the clients' different requirements.
Including: the largest block making machine QT18-20, and many automatic block making machines with different capacity such as QT12-15, QT10-15, QT8-15. QT5-15, QT3-20 and son on. And You can make different designs of concrete blocks, bricks, paving stone and curbstone by changing moulds only.
In the past several years, we have produced and exported many sets of block making machines to Nigeria. And our block machines got good reputation in Nigeria.

If you are going to invest in the block/brick industry, please be free to contact with us.
Contact: Ms Queen
Web: http://www.queenbrick.com

We are a leading manufacturer and exporter of block making machinery in China with a history of 23 years. We have several kinds of AAC block production line to make different kinds of bricks/blocks with different capacities. Our AAC production line is importing German advanced equipment, through digesting, design and more perfect, popular in home and oversea.

AAC also called( Autoclaved aerated concrete) blocks are made of fly ash, lime, cement and aluminium powder, and with the procedures of crushing, measuring, mixing, pouring, autoclaving and cutting. AAC block has advantage of extremely light weight, excellent thermal insulation, heat insulation, energy conservation, waste recycling, convenience etc. As a new building material, AAC is emphatically promoted by the world.

If you need more information of our AAC block machine, please visit: http://www.queenbrick.com/aac-block-machine.html
Contact: Ms Queen
Web: http://www.queenbrick.com

Descriptions of QT6-15 Block Machine:
QT6-15 (6 stands for the production quantity is 6 blocks "400×200×200mm" per mould, 15 stands for the cycle time is 15 seconds) has the production output of 8640-11520 blocks (400×200×200mm) or 120-160 cubic meters for one day (8 working hours). As the moulds are changeable, the concrete equipment is able to produce different types of blocks/bricks.

Main Features of QT6-15 Automatic Block Making Machine:
1. The system equipped with PLC control unit includes safety logical module, producing procedure module and fault diagnosis module. Through human machine interface, the long-distance fault diagnosis function can be achieved, thus operators can handle the system smoothly by simple training.
2. Equipped with 4-poster conducting device and mold unit includes cover-mold and base-mold which pressed by each separated hydraulic transmission device and controlled by synchronization unit. Thus, the system so far so durably.
3. Equipped with especially-designed feeding unit including pendulum fork to remove the raw material effectively and evenly.
4. Equipped with hydraulic transmission unit which assembled of high quality elements manufactured by world famous supplier.
5. Equipped with vibration unit with low frequency condition for vibration and high frequency condition for forming so that products can reach satisfied density and uniformity.
6. The system can produce concrete masonry units with a great many specifications by replacing different molds.

For more information, please visit: http://www.queenbrick.com/QT6-15-block-machine.html
Contact: Ms Queen
Web: http://www.queenbrick.com

Roof Tile Forming Machine

Main Features of Roof Tile Forming Machine:
1. Is manually fed and controlled - Is simple to operate and maintain;
2. Requires just a few hours of instruction to become familiar with its operation;
3. Occupies and needs very little floor area for production;
4. May be disconnected from the power supply and ‘stored’ when not in use;
5. Designed and constructed to the same high-quality engineering standards for which all of our equipment is known.

Main Technical Specifications of Roof Tile Forming Machine:
Product dimension 424x337mm
Forming speed 7-8pcs./min
Forming Press and sieve
Production 3500pcs.(8hours)
Power 14.45kW
Voltage 380V
Mainframe dimension 3200x1600x2600mm

For more information, please visit: http://www.queenbrick.com/roof-tile-forming-machine.html
Contact: Ms Queen
Web: http://www.queenbrick.com

The QT18-20 block machine is the largest capacity block machine in the world. You can make different designs of concrete blocks, bricks, paving stone and curbstone by changing moulds only. The block making machine QT18-20(18 stands for the production quantity of 18 blocks "400x200x200mm" per mold, 20 stands for the cycle time of 20 seconds) has the production output of 25,920 blocks (400x200x200mm) or 360 cubic meters for one day (8 working hours).

Main Features of QT8-15 Block Making Machine:
1. Super-strong steel structure, made of extensive imported original parts, ensuring more stability and reliability for the main machine body.
2. The whole process uses a PLC aptitude control and dialogue system of human-machine interface, easy to analyze the chance signal, ensure the best operation effect.
3. High-efficient and super-strong vibration system, computer-control flow pressure of the hydraulic system, realize vertically synchronous vibration, frequency conversion, and braking, with synthetic output compounded with double vibration sources, thus greatly increase product compactness and mold-box service life.
4. The cloth system adopts semi-closed screen reticular rotational feeding unit to feed materials forcedly, with evenness and even speed, ensuring product intensity.
5. Fitted with special hydraulic loading unit, readily realize mass and automatic production, saving a great deal of human power, maintenance field, and circulating fund investment.

For more information, please visit: http://www.queenbrick.com/QT8-15-block-making-machine.html
Contact: Ms Queen
Web: http://www.queenbrick.com

1) First, dose and match measured raw materials;
2) After distributing, feed raw material into pouring mixer to make slurry;
3) Through thoroughly mixing, the slurry is poured to mould;
4) After pre-curing under a certain temperature and time, the block would reach a certain hardness prepare for cutting;
5) Tilting hoister would turn over 90 degree of mould;
6) Then open the mould and separate it from block, and take the block with side plate to cutting cart;
7) The blocks then be cut through the cutter firstly of two vertical sides of block;
Secondly the horizontal cutting;
9) Finally the vertical cutting;
10) After cutting, the block is hanged to trolley with side plate by semi-finished product hoister;
11) Organizing the cut blocks and put them into autoclave;
12) Hardening the blocks under certain temperature and pressure;
13) Take finished products out of autoclave;
14) The finished product hoister take the finished product to stock shield;
15) Packed for loading;
16) The side plate return back by side plate roller;
17) Side plate would be organized with open mould;
18) Clean the mould and preparing for next pouring;
19) Steel bars processing line for slab production;

Our AAC blocks production line are sold well in Nigeria. If you need more information, please visit: http://www.queenbrick.com/aac-block-machine.html
Contact: Ms Queen
Web: http://www.queenbrick.com

AAC Lightweight Block Production Line also called AAC Plant,AAC block machine,Autoclaved aerated concrete block machine,AAC block production line is more and more popular in the world market.
As a new building material, AAC lightweight block production line fulfills the demand of concrete industry, which requires to save the natural resources and protect the environment.Queen Machinery's AAC lightweight block making plant can meet the specific requirements of the market and customers.

AAC is environment-friendly and new building material. AAC has the advantages of extremely light weight, high compressive strength, excellent thermal insulation, great acoustic insulation and high fire resistance. AAC is produced out of a mix of cement, lime, fly ash, gangue, river sand and aluminium powder etc., through batching, mixing, casting, cutting and autoclaving. AAC can be produced in a large variety of sizes, from stand blocks to large reinforced panels, and it can be cut, sawn, drilled, nailed and milled like wood, making it an extremely workable product.

For more information, please visit: http://www.queenbrick.com/aac-block-machine.html
Contact: Ms Queen
Email: queenmachinery@gmail.com

Queen Machinery is a leading and professional trading company of brick making plant.
There are many kinds and models of brick plant, such as, automatic brick making machine, semi-automatic brick plant, QT12 brick making machines, cement brick making equipment,hollow brick making machine, AAC brick making plant and so on.
If you need more information, please visit: http://www.queenbrick.com/QT12-15-automatic-brick.html

Contact: Ms Queen
WEB: http://www.queenbrick.com

Descriptions of Fully Automatic Block Production Line:
1. Modularized Production Line: Base on QT6/8/10/12 block making machines as main machine. It can form production line with single or double main machines.
2. Advanced Technology: Adopt advanced technology, combine with ten years experiences, developing and innovating.
3. Advanced Performance: Widely used, steady and reliable quality, convenient to operate and maintain.
4. Intelligantize Integration Control System: Through network or center assemble line to transmit data, Monitor And Control every part with quick, accuracy, real time characteristic, fault alarm, can finish telenet visit, make the manufacture factories easy to adjust program, set the parameter, amend and upgrade system.
5. Top Brand Parts and Components: Adopt the international famous Mitsubishi PLC and transducer, Omron sensor, guarantee the dependability and stability of the whole production line to operate continuously with two shifts one day.
6. Production Capacity depends on the main machine the line adopt.

For more information of Fully Automatic Block Production Line, Pls visit: http://www.queenbrick.com/fully-automatic-block-production.html
Contact: Ms Queen
Web: http://www.queenbrick.com

Descriptions of Mobile Concrete Mixing Plant:
Mobile concrete mixing plant([ur=http://www.queenbrick.com/mobile-concrete-mixing-plant.htmll]mobile concrete batching plant[/url]) is one of the most efficient and versatile plants which is used globally. Up to now Queen Machinery's mobile batching plants have been exported to over 60 countries all over the world. They are utilized in building of highways, bridges, canals, airports, industrial & multistory buildings and ready mix concrete plant. Our mobile concrete mixing plant not only makes concrete quickly but also keeps the quality high with no separation during discharge. It has a compact design and is cost friendly as well. We have also become a renowned concrete mixing plant trading company and exporter in China.

For more information, please visit: http://www.queenbrick.com/mobile-concrete-mixing-plant.html
Contact: Ms Queen
Email: queenmachinery@gmail.com
Web: http://www.queenbrick.com

Nigeria is located in Western Africa, bordering the Gulf of Guinea, between Benin and Cameroon. It has a total area of 923,768 sq km. Nigeria is rich in resources and has a well-developed financial, legal, communications and transportation industry. As Africa's most populous country, it has more than 250 ethnic peoples, in which Hausa - Fulani, Yoruba, Ibo tribes are most influential. Since the 1970s, oil exports gradually become the main source of income for the country. Nigeria has been classified as emerging markets, and rapidly approaching the standards of middle-income countries.

Nigeria has large-scale of mineral resources which are undeveloped, including natural gas, coal, bauxite, tantalite, gold, iron ore, limestone, tin, niobium, graphite and zinc, etc. There are more than 30 kinds of mineral resources. Although these natural resources have great reserves, but Nigeria's mining industry is still in its infancy, especially for oil, natural gas, tin, coal, and limestone. So far oil reserves have been proven of 270 billion barrels, ranking ninth in the world, it can be further exploited for 30 years in the current exploitation rate. Natural gas resources in Nigeria is very rich, with reserves of 3.4 trillion cubic meters, ranking fifth in the world and first in Africa. Only 12% has been developed. The coal reserves is about 2.75 billion tons. Nigeria is the only coal-producing country in Africa.


Block Making Machine in Nigeria, Nigeria Block Making machinery

Block making machine in Nigeria is designed and produced for the Nigeria clients. Nigeria block making machines are used to make blocks with clay, concrete and so on. There are many kinds of block making machine in Nigeria, such as clay block making machinery, concrete block making machinery, hollow block making plant, automatic block machine and so on.

Queen Machinery is the largest trading company of block and brick making machines in China

Queen Machinery is the largest trading company of block and brick making machines in China. Queen Machinery's block machines and brick machines are exported to Nigeria for personal and commercial brickyard use. The main Nigeria block making machines are: Nigeria block making machine, Clay brick making machine in Nigeria, Nigeria clay brick making machine, Automatic block making machine in Nigeria, Nigeria brick plant, Concrete block making machines in Nigeria and so on.

For more information, please visit: http://www.queenbrick.com/block-making-machine-in-nigeria.html
Contact: Ms Queen
WEB: http://wwww.queenbrick.com

QT12-15 Automatic Brick Making Machine is designed to fulfill the demands of medium business entrepreneurs in concrete block making industry. With its minimum first investment cost and scalable structure, QT12-15 Automatic Brick Making Machine is the ideal solution for the investors who are seeking to increase the overall quality of concrete products and to minimize manufacturing costs.

The features of Automatic Block Machine
(1)Using the manual force control and jog control together, the operation is simple and efficient;
(2)Using four poles-oriented manner and ultralong orientation bear to ensure the precise movement of the pressure head and mould;
(3)Using the ultra strong steel and special welding techniques,it is strong and of high resistance to vibration;
(4)It is a multi-useful machine,which could produce road blocks, curb stones, blocks, hollow bricks and other shapes of different specifications of concrete products via changing the block mould.

Proven quality in the automatic block machine industry
PLC automation software, which is developed by Queen Machinery R& engineers, has proven its quality and reliability in manufacturing plants of many local and foreign enterprises. The whole plant operates automatic so production quality for each cycle and production capacity for each working shift are maintained and stabilized.

Automation system also makes it possible to operate the plant in various speeds. A mimic control panel indicates all units of the
plant on a graphical diagram so using the control panel became easy and practical. The operator can switch to manual operation anytime. Failure detection is also fast and easy with the mimic control panel.

For more information, please visit: http://www.queenbrick.com/blog/automatic-block-machine

What is clay?
In brick-making terms, clay covers a range of naturally occurring raw materials which are used to make
a product. The clays vary considerably in physical properties, colour, hardness etc, and mineralogical
content. They do, however, have certain properties in common. They have the ability to be crushed and
mixed with water to form a plastic material which can be moulded into various shapes. This can then be
fired to a high temperature during which process it attains a hard, weather resistant characteristic.

Clay brick making machine features:

1. The body of clay brick making machine are welded by steel plates, steel castings. The spindle and clay tablet are processing primarily. The machine can run smoothly without foundations because of the stable body and high concentric spindle, which is easy for the installation and move.

2. The bearing box of clay tablets and mud tank are set separately. So the concentricity is good and the mud could not get into the bearing. So the clay brick machines have a long service life.

3. The broken could not fell into the mud tank to affect production because the dual safety device of the pressure fender.

4. The spindle bearings and pressure fender gear are difficult to wear because they work in the lubricant.

5. It is convenient to change the screw because floating-axis structure and six sets of connection of the spindle.

For more information, please visit: http://www.queenbrick.com/QT18-20-block-making-machine.html

Fly-ash bricks are slow but surely replacing conventional clay bricks for wall constructions. It is green and environment friendly material. For achievement of real sustainable development. So fly ash brick making machines are popular nowadays.

Features of fly ash brick machine:

1. This machie is designed by super steel structure,it use the inport material in order that the machine is more stable and reliable.

2. It has vibrating system that is of high efficiency and superpower. Make use of the hydraulic pressure controlled by computer, the machine can realise vertical in-phase shake, frequency transform, blake, composite output ,supply the vibrating strength to the moulding box evenly,enhance the compactness and the life of moulding box.

3. The equipment adopt the PLC system and controlled by computer, thus can anlysis the random signal, diagnose the fault, set the paremeter that ensure the production is in safe condition.

4. Professional buttress machine is equipped, it can produce large amount bricks easily and automatically, thus can save labour, maintance yard and the circulating fund investment.

5. Partially closed type material disposal sysem was adopted in this machine. This technology can make the material disposal more fast and evenly.

For more information, please visit:
http://www.queenbrick.com/blog/fly-ash-brick-machine
OR http://www.queenbrick.com/QT10-15-automatic-block.html
Contact: Ms Queen
Web: http://www.queenbrick.com

[center]Fully Automatic Block Production Line[/center]
1. Modularized Production Line: Base on QT6/8/10/12 block making machines as main machine. It can form production line with single or double main machines.
2. Advanced Technology: Adopt advanced technology, combine with ten years experiences, developing and innovating.
3. Advanced Performance: Widely used, steady and reliable quality, convenient to operate and maintain.
4. Intelligantize Integration Control System: Through network or center assemble line to transmit data, Monitor And Control every part with quick, accuracy, real time characteristic, fault alarm, can finish telenet visit, make the manufacture factories easy to adjust program, set the parameter, amend and upgrade system.
5. Top Brand Parts and Components: Adopt the international famous Mitsubishi PLC and transducer, Omron sensor, guarantee the dependability and stability of the whole production line to operate continuously with two shifts one day.
6. Production Capacity depends on the main machine the line adopt.

For more information, please refer to: http://www.queenbrick.com/fully-automatic-block-production.html
Contact: Ms Queen
Web: http://www.queenbrick.com

There are many brick manufacturers in the world. If you are looking for a brick machine now. Queen Machinery can help you.
Queen Machinery is the largest brick machine trading company in China. We provide many kinds of brick machines, such as: QT18-20 brick Machine, QT12-15 brick machine, QT10-15brick machine and so on. Also we provide fully automatic brick machine and semi-automatic brick machine, in addition, we provide with our clients the brick production line solutions according to their requirements.

Now i will introduce the largest brick machine in the world: qt18-20
The QT18-20 block machine is the largest capacity machine in the world. You can make different designs of concrete blocks, bricks, paving stone and curbstone by changing moulds only. The block making machine QT18-20(18 stands for the production quantity of 18 blocks "400x200x200mm" per mold, 20 stands for the cycle time of 20 seconds) has the production output of 25,920 blocks (400x200x200mm) or 360 cubic meters for one day (8 working hours). As the molds are changeable, the block making machine is able to produce different types of blocks/bricks.

If you are interested in our brick machine, please feel free to let me know.
For more details, please visit: http://www.queenbrick.com/QT18-20-block-making-machine.html

There are two basic types of concrete block making machine, depending on the
method of moulding the blocks:
• Stationary concrete block making machine that mould blocks, one or more at
a time, on pallets.
• “Egg-layer” concrete block making machine that mould blocks on a concrete
slab.


Some advantages and disadvantages of stationary and “egg-layer” concrete block making machine are given as below:

Stationary concrete block making machine

A relatively small space is needed for production. Block machine can be under cover. Pallets are necessary. For most systems, enough pallets for a day’s production are needed. Pallets are therefore an expensive item initially. They also involve ongoing expense as damaged (or stolen) pallets have to be replaced. (Some hand operated machines for making bricks need only a few pallets because bricks are removed from the pallet directly after moulding.)

“egg-layer” concrete block making machine
A fairly large slab is needed for production of blocks. The slab is expensive and increases the size of the site necessary for a blockyard.
Pallets are not necessary.

For both types, equipment available includes small handoperated devices, which have limited output, and a range of electrically powered machines of high output. Detailed information on the output and price of specific concrete block making machine should be obtained from Queen Machinery.

For more information, please visit: http://www.queenbrick.com/blog/concrete-block-making-machine

QT10-15 Automatic Block Making Machine:
1. QT10-15 brick machine (10 stands for the production quantity is 10 blocks "400×200×200mm" per mould, 15 stands for the cycle time is 15 seconds) has the production output of 14400-19200 blocks (400×200×200mm) or 200-272 cubic meters for one day (8 working hours).
2. QT10-15 can produce various types of hollow blocks, solid bricks, interlocks, pavers, and curbstones, etc.

Main Features of QT10-15 Automatic Block Making Machine:
1. Uses Germany Siemens PLC control system and Siemens Touch Screen.
2. Uses high-dynamic proportional and directional valves, which automatically adjust the oil flow and pressure as per specific working requirements, to buffer the hydraulic cylinder when working; uses integrated high-pressure and soft oil pipes, with easy installation;
3. Uses multi-shaft rotating and compulsory feeding, which greatly improves the density and intensity of the blocks, and reduces the feeding time as well;
4. Integrated structure of vibrating and moulding platforms, which reduces the weight of the machine, and improves the vibrating efficiency;
5. Uses one single motor to drive the vibrator via transmission shaft, avoiding the inconsistency of double motors, so as to save the power;
6. Uses double-line aero vibration-proof system, which reduces the vibrating force on the mechanical parts, improves the using lifetime of the machine, and reduces the noise;
7. Maintenance-free hinge bearings on the hydraulic cylinders and driving rods, screwable straps on lever arms for easy exchange of blots, extension of guide bearings for absolutely parallel and tilt lift movement of mould and tamper head;
8. Heavy-duty machine frame, which uses high-intensity steel and advanced heat treatment, is wear resistant.

QT18-20 Block Making Machine:
The QT18-20 block machine is the largest capacity machine in the world. You can make different designs of concrete blocks, bricks, paving stone and curbstone by changing moulds only. The block making machine QT18-20(18 stands for the production quantity of 18 blocks "400x200x200mm" per mold, 20 stands for the cycle time of 20 seconds) has the production output of 25,920 blocks (400x200x200mm) or 360 cubic meters for one day (8 working hours). As the molds are changeable, the block making machine is able to produce different types of blocks/bricks.

Main Features of QT18-20 Automatic Brick Making Machine:
1. The block making machine uses Germany Siemens PLC control system and Siemens Touch Screen.
a. It has a human-computer interface screen with easy operation.
b. It is able to set up, update and amend the production perimeters to maximize the production output.
c. It offers a dynamic display of the system's status, automatic trouble shooting and warning notice.
d. It has an advanced logical safety lock function, avoiding mechanical accidents caused by operational mistakes.
e. It is able to troubleshoot the machinery via remote control.
2. It uses proportional electrical and hydraulic control relief valves, which automatically adjust the oil flow and pressure as per specific working requirements, to buffer the hydraulic cylinder when working. It uses integrated high-pressure and soft oil pipes, with easy installation;
3. It offers optimum structure of vibrating shafts, which assure the vibration is distributed uniformly in the range of the vibrating table, thereby improving the uniformity and stability of blocks, produces better quality of product than before when using the same ratio of raw material, and effectively reduces the noise;
4. The block making machine uses a special design of fixing table and knock type vibration, improves the speed of making product and the accuracy of the size of product;
5. It uses multi-shaft rotating and compulsory feeding, which greatly improves the density and intensity of the blocks, and reduces the feeding time;
6. It has a heavy-duty machine frame, which uses high-intensity steel and advanced heat treatment. It is wear resistant;
7. The mold frame is made with inlaid structure, and the mold is processed via the procedures of carburizing, nitriding and quenching which guarantee that the strength of mold core and mold surface could be HRC52-HRC62;
8.The lifespan of mold is not less than100 thousand times.

For more information, please visit: http://www.queenbrick.com/QT18-20-block-making-machine.html