RCDIY's Posts

Nairaland Forum › RCDIY's Profile › RCDIY's Posts

1 2 3 4 5 6 7 8 ... 13 14 15 16 17 18 19 20 (of 20 pages)

Science/Technology › Re: RC Cars, Drones And Planes by RCDIY(m): 1:32pm On Feb 03, 2018

brendan007:
Great! I'll be expecting the update

Okay, bro.
I've ordered for the ESCs. But they don't have 5V supply for the FC and other little components. So I ordered a PDB too.
Hopefully, I'll get them in 2 - 3 weeks and continue the build.

Science/Technology › Re: RC Cars, Drones And Planes by RCDIY(m): 9:24pm On Feb 02, 2018

RCDIY:
...........
Omnibus F3 FC (available),.......

Science/Technology › Re: RC Cars, Drones And Planes by RCDIY(m): 9:10pm On Feb 02, 2018

brendan007:
But no activity in the thread

I actually open another thread solely for quadcopter and that's where I've posted more. Here's a link to the thread.

https://www.nairaland.com/4147249/how-build-quadcopter

I sold the last craft I made. Presently, I'm making another using a slightly bigger frame. Also, I want to try Blheli ESCs instead of the SimonK that I've been using.

On the other thread, I was working on a 250mm on iNav firmware for added features especially Mission flying.

I'll share the updates here too.

Parts list
260mm frame (Available)
2206 2200kv motors (available)
Omnibus F3 FC (available)
BLheli ESCs (Yet to order)
1500 4S Lipo (yet to order)

1 Like

Science/Technology › Re: RC Cars, Drones And Planes by RCDIY(m): 12:18am On Feb 02, 2018

brendan007:
Knock! Knock! Anybody here?

Person dey oo!

1 Like

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 3:46pm On Feb 01, 2018

Hello.
Still thanking all who contacted me with queries about this topic. I am grateful for you interests/criticism.

After test-flying the last build, I was quite impressed by the hardware and wanted to proceed with the next phase; advanced flight modes.
1. WP (Waypoints)
With WP feature, the Quadcopter is supposed to be able to fly a pre-planned mission on a pre-set parameters (distance, altitude).

2. Follow-Me
This feature is supposed to make the craft follow the controller. This is done via constant update of GPS position passed to the FC through a Bluetooth or WiFi connectivity.
Unfortunately, I had a short circuit which fried the FC and GPS module.
I've ordered for replacement and will hopefully pick them tomorrow.

Updates will come as soon as I get everything set.

1 Like

Technology Market › Drone/quadcopter Parts And Accessories Available by RCDIY(op): 1:20pm On Feb 01, 2018

Hello...
I have used/new Drone accessories for sale.

Brushless motors (1000/920/2200kv)
Flight controllers
Electronic Speed controller (ESC)
Power distribution Board
Radio receivers
Quadcopter frames (250/330/450mm).

I also have a 3S 2200mah Lipo battery for sale too.

Let me know if you need any.
And if you have a broken drone, I can help you fix it.

Thank you.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 11:05am On Jan 25, 2018

obongtunji:
I'm also interested

Please email me too
Samcarnival@yahoo.com

Mail sent.

Thank you

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 6:45am On Jan 25, 2018

prinzadey:
Can you please send me a breakdown amount to build one? I'm into GIS and I will love to build one to take aerial photographs. Thanks
adewalealabi90@gmail.com

Mail sent.

Thank you

Crime › Re: White Men Kidnapped In Kaduna; Security Officers Killed (Graphic Photos) by RCDIY(m): 12:03pm On Jan 18, 2018

LionDeLeo:
You can just imagine this nonsense.

Criminals get songs of praises from their fellow online criminals while the security personels losing their lives on daily basis get rebuked.

If the converse were the case here, pigs, goats, donkeys will pull out some funny explanation from their stinking @rsses about how the security personel killed the criminal to cover up.

May the souls of all men and women who laid down their lives for their compatriots rest in peace.

I want to believe I understand your point but running out to politicise and unfortunate incident like this makes me wonder what we have done in this country to deserve both you and the guys you criticize.

I really wish I have time to reply all those imps that can't see this as it is: an unfortunate and despicable incident that has befallen fellow Nigerians, security men for that matter.

Until we rise above the hate and bitterness, this country will continue to go nowhere.

Car Talk › Re: What Happens When U Put Ur Car In Reverse While Driving? by RCDIY(m): 8:44pm On Jan 12, 2018

ShegzyB:
I see. Apparently, that's even a newer model car, with advanced safety features. I'm sure the result would be different with, say, a camry 1999 (pencil/tiny light) or 98 Honda Accord. You get my drift?

I mistakenly did it with a 2000 Camry. Speed was about 110km/h on airport road Abuja. Going up a little incline, I'd say the tranny was in the 4th gear as I had kick up to overtake another vehicle... Then, one mumu ran into the road right under a pedestrian bridge.
In my confusion at that moment, I depressed the gear shift lever and moved into reverse. I think the tires changed rotation or came to a total stop cos I heard a screeching sound. I moved back to D instantly.
It's been 2 years and my gearbox remains fine.

It's a bad idea to try this deliberately.

1 Like

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 4:55pm On Jan 10, 2018

Hello...
Here's an update on the 250mm quadcopter build.

A heads-up for people who didn't start with us on the thread but who are interested in more details, I planned a build based on an F1 FC with a 250mm frame for fast flights.
Over time, I've made changes.
1. 20a ESCs to replace the initial 30a to cut a little weight.
2. F3 Flight controller in place of F1. This will allow us expand the features of the copter later.
3. PPM receiver in place of PWM since F3 FC doesn't support PWM directly.
4. iNAV firmware instead of Betaflight to avail me GPS-based like RTH, ALTHLD and WP.

I eventually performed a test flight this afternoon and the craft flew impressively. It's easily the fastest thing I've built.

I will discuss iNAV firmware, the Omnibus F3 and their features later.

I couldn't take much pictures since I went to field alone

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 1:24pm On Jan 09, 2018

Rotentina:
872row@gmail.com

Sent you a mail already, chief.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 10:15pm On Jan 08, 2018

Rotentina:
Please sir, can you break down the cost of building a drone with camera for me? 872row@gmail.com my mail.

You have mail.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 5:59pm On Jan 08, 2018

RCDIY:
I'll continue work on the Q250 with F3 FC running on iNAV this weekend

So, I spent the best part of weekend working on the iNAV version for my FC. I however couldn't finish it. There were issues with the GPS and Magnetometer.
First, it appeared the GPS couldn't perform well at the height I installed (probably due to electromagnetic field from the brushless motors). I increased the height and issue was resolved.
The magnetometer, on the other hand, would not stay on. I tried all I could to no avail. I eventually found a solution online: installing a 'pull down' resistor in the Mag circuit.
I'll do the soldering this even and try again.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 5:51pm On Jan 08, 2018

Rotentina:
Please, how do we go about the CCTV on drone?

If you mean a camera, you can install one on the quadcopter. It's either it will a good, small size camera (typically HD action camera) or a normal camera for FPV.
The HD camera will obviously record videos.
You can transmit videos/audios in real-time (maybe a bit of latency depending on quality of Transmitter/receiver) and view on a Google or a monitor. That way, you can actually fly the drone beyond line of sight or to the peripherals of the Transmitter range.

Science/Technology › Re: RC Cars, Drones And Planes by RCDIY(m): 9:41am On Jan 07, 2018

tdboy59:
hey i need a rc transmitter a receiver........
anyone?...................parkingzzz....?

Send a message on WhatsApp, bro.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 7:14pm On Jan 04, 2018

RCDIY:
I have been actually waiting for PPM receiver to enable me continue the model I have been working on.....

Below is the PPM receiver. I also go a PWM - PPM converter so that my old PPM receivers don't become useless.
I'll continue work on the Q250 with F3 FC running on iNAV this weekend

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 10:57pm On Jan 03, 2018

MDonSwitch:
Pls friend I'm embarking on a journey of building one for my student. I'm a secondary school basic technology teacher. Pls how much do you think it would cost me to build a small one and how do I source the materials. My email is klyntex@gmail.com I look forward to your reply soon.

Great! I will contact you, sir

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 8:13pm On Jan 03, 2018

peacemara54:
Dear bro, pls avoid anyone trying to distract you, you are really an inspiration in the tech world. pls I will send you a mail, want you to build one for me I really need it and have a little question to ask.

Thank you, bro. Expecting your mail.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 12:09pm On Jan 03, 2018

kolawoleibukun:
I respect your hustle. carry go!

make God bless your hustle oh.

Thank you, bro

1 Like

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 8:38am On Jan 03, 2018

kolawoleibukun:
,......
....,........

Are you happy just messing up this thread?
Would you have me close it just for you to rest?

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 10:43pm On Jan 02, 2018

Ilajeboy:
Ohhh... Price range?

Please send me a mail (ogocology@gmail.com)

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 10:43pm On Jan 02, 2018

[quote author=iukpe post=63836982][/quote]You're right. We should ignore him.

Thank you.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 4:37pm On Jan 02, 2018

kolawoleibukun:
the biggest full na you o. where your creativity won lead you go? weting this nonsense won contribute four our lives. dem day tell you say even innoson way day invent better thing way people see them lock am for jail. na you won come invent? na today we begin see invention? guy eno go work. the government no give any room for all these nonsense. make una focus on productive thing una age don add one yesterday. before you no na wrinkle and white hair for finish una for this nonsense.

I've been to your profile and gone through some of your posts.
1. You're yet to create a single post on NL even though you've made about 250 posts on other people's threads where you trade insults.
2. You seem to have a lot of negative energy.

Please take it easy.

Thank you

3 Likes

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 3:22pm On Jan 02, 2018

toxicbrain:
really funny

Hope you had a good laugh. Please educate yourself on words and their synonyms.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 1:35pm On Jan 02, 2018

Aventures:
Any website link?

Not sure if it's okay to post links here. But try Ali-Express and Banggood.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 12:56pm On Jan 02, 2018

Hello...
Thank you all for your interest and comments.

I have been actually waiting for PPM receiver to enable me continue the model I have been working on.

This model, a 250 size quad, will feature an F3 Flight controller running on iNAV software.
I intend to integrate advanced features like position/altitude hold, RTH, mission capabilities and 'follow me'.

The receiver is presently at the post office. Will pick up after work.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 12:23pm On Jan 02, 2018

Aventures:
Thanks for this info, very educative and it is something that can enhance the Interest of our children in science and technology. Also, it can strengthen parents - children bond she. you spend quality time together to build this.
please where can I get this materials , I will like to buy. Thanks in advance

Thank you.
I actually started making a drone for my son's first birthday. While on it, I got more interested and it became my hobby.
I plan putting my children toward careers as pilots, UAV operators or or craft design and maintenance.

You can get all you need online.

Thank you

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 12:18pm On Jan 02, 2018

obatoro:
Good job there, but where can I get all the materials and items needed for assembling?
It will also be nice to have a step by step instruction. I've followed the thread from day one.

You can search online. I get all my parts online

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 12:17pm On Jan 02, 2018

iukpe:
build
bɪld/Submit
verb
1.
construct (something) by putting parts or material together.
"the ironworks were built in 1736"
synonyms: construct, erect, put up, assemble, set up, raise.....

Brother, don't waste your time on folks who don't have anything better to do with their time.
I'm sure he's still a Jambite

2 Likes

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 12:14pm On Jan 02, 2018

devdanArthur98:
Please under which section on Ali express.. I tried searching but I'm not convinced with the results I'm getting

RC parts and accessories.

Science/Technology › Re: How To Build A Quadcopter by RCDIY(op): 12:13pm On Jan 02, 2018

toxicbrain:
build what? you are just assembling... mtcheew

Professor, kindly teach us the difference between building and assembly in the context of crafts and machineries.

Thank you

1 2 3 4 5 6 7 8 ... 13 14 15 16 17 18 19 20 (of 20 pages)