₦airaland Forum

Hugman you respond to my reply;

In response to your questions, I use only 1dish for both
I use 2 in 1lmb for both as well
I have never done factory reset on my decoder before
I need to do the whole setting again, can i get the configurations pls
What do I need do pls...the house is so boring, i cant even watch our local stations...

hugman:
Are you using two dish ?
Are you using 2 in 1 lnb for d*TV and multi TV?
Did you factory reset your decoder?

Remedy -
If you are using 1dish with 2 in 1 lnb and your dish is well install without shaking then check your diseqc switch replace it if possible.

But if you already reset your decoder b4 then you should scan for channel for the two satellite one after each other.
Also check your cable

In response to your questions, I use only 1dish for both
I use 2 in 1lmb for both as well
I have never done factory reset on my decoder before
I need to do the whole setting again, can i get the configurations pls
What do I need do pls...the house is so boring, i cant even watch our local stations...

[quote author=hugman post=39398275][/quote]H-man greetings. pls I am having problem with my qsat...all the free to air channels are giving bad signals....All other D*tv channels signal and quality strenght are ok...just the free to air channels are showing bad signal...I enjoy watching some of their stations like Rave Tv, Galaxy, Liberty etc...pls help

shinabadmus:
pls I really need one qsat. where and how much can I get it

Why do you want to waste your money...Haven't you heard that qsat has not been working?

hugman:
Qsat is working check your qsat some channel are working

H-man greetings. pls I am having problem with my qsat...all the free to air channels are giving bad signals....All other D*tv channels signal and quality strenght are ok...just the free to air channels are showing bad signal...I enjoy watching some of their stations like Rave Tv, Galaxy, Liberty etc...pls help

danyeb:
ma guy here its dst* not what you wrote please we dont want trouble....
but on a serious not the six months account will end while Ithe time I watch my qsat will be barely a month online...
I pray it comes soon n becomes stable

ma guy, all the codes you have been using, what has it brought to you....you try to use codes because of trouble and troubles upon trouble still visit us all...so whats the point....we are just careful for nothing

Spycam server is still under mentainance and as at the time of writing this post, the sever is still not fully back but i hope it will be fix soon. Four days ago some channels came online but couldn’t stay for many hours and it has been on and off but no need to worry it will come online soon. Qsat team are doing a great job and i wish them the best of luck as they continue to render their good services for us to continue watching dstv because without them, many average income earners like myself will not have been able to watch dstv

hugman:
Qsat is working check your qsat some channel are working

Please stop spreading fake news

hugman:
QSAT WORKING ON 68E

Qsat has Been confirm working 100% on 68e on dst* channels east Africa, South Africa qsat users confirm this . For you to get it in West Africa you need about 6 foot dish because the beam is far from West Africa position

Hugman, how do i configure, cos my installer is on the run after doing a bad job for me...so am on my own now

mine is still showing that contact your dealer msg

rapthugx:
If you are getting bad signal check d cable that connects the dish to your decoder to b sure if it is still intact n check if your dish is out of position.

Thanks bro...its working nw

mine has been giving me bad signal msg.....does anyone have idea why this is happening and how to come out of it...

As we all know, we don’t have avatar account any more an in other words, qsat team of engineers are will no longer produce avatar codes but instead they will now be selling spycam codes. Spycam codes opens all channels on the canalplus bouquet and premium channels on dstv just that the spycam sever is not stable and as i speak now engineers are currently fixing new sever after which they will run a new software programming to make both packages more stable for viewing. This message was given to me this afternoon when i contacted the team.They started the fixing two weeks ago but they have reach the point where all feed severs need to be shut down for new programming to take place. The “Contact your dealer message on q28 and q26 is an error message and from the look of things, a new software will be realised but i can’t be too sure but for now let’s wait and see how things works out but the sever will be okay soon because work is almost completed