₦airaland Forum

blexxonmak:
21k.
Send me a PM.

Leon2dgh:
yes it is. I even have one that I want to sell. But i am in Benin city

lincolnola:
How much bro??

Willokafor:
I bought it from the store.

Leon2dgh:
ourtv decoder.

Willokafor:
How do i pair strong 497s for free 1 year view
I jst bought it new

sampete:
please do you know where I can get one of this?

sampete:
Bro, what's the name of this app you're using?

lincolnola:
Good morning,
Please is this an app or screenshot from TV? and if it's android app,please what is the name of the app??
Thanks

lamtam0:
11090v30000

Ojochogwusunny:
okay.is it bt05 or bt03

Ojochogwusunny:
please which sat finder are you using sir?

lamtam0:
only Tara frequency is free on it

Digitman:
DiSEqC switch Versions and their uses :

DiSEqC 1.0, which allows switching between up to 4 LNB in one Set-top Box

DiSEqC 1.1, which allows switching between up to 16 LNB in one Set-top Box

DiSEqC 1.2, which allows switching between up to 16 LNB and control of a single axis satellite motor

DiSEqC 2.0, which adds bi-directional communications to DiSEqC 1.0

DiSEqC 2.1, which adds bi-directional communications to DiSEqC 1.1

DiSEqC 2.2, which adds bi-directional communications to DiSEqC 1.2


Attached is an image showing how you can archive your goal using a diseqc 1.1 or better still a 22khz switch.

Digitman:
DiSEqC switch Versions and their uses :

DiSEqC 1.0, which allows switching between up to 4 LNB in one Set-top Box

DiSEqC 1.1, which allows switching between up to 16 LNB in one Set-top Box

DiSEqC 1.2, which allows switching between up to 16 LNB and control of a single axis satellite motor

DiSEqC 2.0, which adds bi-directional communications to DiSEqC 1.0

DiSEqC 2.1, which adds bi-directional communications to DiSEqC 1.1

DiSEqC 2.2, which adds bi-directional communications to DiSEqC 1.2


Attached is an image showing how you can archive your goal using a diseqc 1.1 or better still a 22khz switch.

Digitman:
I had a very hectic day yesterday, so the time to type long long sentences nor dey.

Anyway let's begin. Your first question explains you have four dishes connected to two diseqc switches and you want to connect both diseqc switch to one decoder? ( please correct if I am wrong)

If that be the case, it shows you already know how to connect a diseqc switch. So no need to go into that.

But where your number one question sounded out of place, is you have four dishes connected to two diseqc switch. Which brings the question.. Why would you even need two diseqc switch for four dishes? Because there is already a four slot for four dishes in one diseqc switch. I am still trying to wrap my head around that. The only time the need for an extra diseqc switch will arise is if you have more than four satellite position that you want to connect to your receiver.

Then you have two options... You either buy an 8way diseqc switch or you buy a diseqc 1.1 switch and connect two diseqc to it. ( To be continued)

Digitman:
Yes there is a practical way.. First you need to crawl before you can walk, and you need to walk before you can run.


In translation. Start with something easy and work your way up. Most people you see who post multi lnb setup, must have been tracking satellite position for quite sometime, so must have trained their mind, eyes and hand over the course of all these tracking.


So you have to do some practice and experimenting with sat that have close proximity, before you choose to jump into the complex ones.

On the issue of dish size.... 90cm to 1m will do you a lot good for practice