₦airaland Forum

emadamysy:
Try and Check your Engine Mounts

I have changed the engine mounts. When the AC is not on, the engine doesn’t shake. So I don’t think it is the engine mount

Good morning everyone.

I have an issue with my Honda Accord 2010.

Recently a rewire worked on my AC and even since then my engine shakes aggressively whenever I put on the AC and the car is in traffic. If I am driving, it drives smoothly but once I enter traffic and the AC is on, it shakes very aggressively that I have to put it off. The RPM drops to almost zero

It appears that the AC is drawing too much power from the engine.

Now they are saying I should bring 41k to change the AC panel and the fuse box to rectify the issue.

Please has anyone experienced something similar before and how was it resolved.

Pearl1910:
Uber inspection fee; Hold 3k, I dont know how much they charge now but it cant be more than that. Drive in and get it done.
Go with your complete vehicle documents and drivers licence.
Your car should be just okay, devoid of deep dents and very obvious scratches. Minor scratches will still pass.
AC, Radio, horn, central lock, window whiners, door handle and lights should all be working well.

Thank you. My central lock is not working. I think I will just pause pending when I repair that one

Hi all,

Please how much is Uber inspection fee and do I have to book in advance or I can just drive in and get it done.

Also, what does it entails? Must my car be painted and looking sharp? What do they ask for during the inspection?

Thanks in advance for your response.

kingreign:
Replace sensor with tokunbo part or OEM brand new. Most new sensors sold in Nigeria are fake low quality parts.

As for your RPM, check if your intake air cleaner is okay, if the intake hose is okay, vacuum lines are okay and if the rug/carpeting isn't in the way of the throttle pedal.

Thank you. I will check them out

kelvinmnet:
High RPM can also cause increase in consumption.
Is your Catalyst intact?
Did you test the old o2 sensor with a multimeter?

Catalyst is not intact. I did a cheap catalyst last year and I guess it has gone bad.

Yes, I test the old O2 sensor. The connector was bad.

Hello everyone,

My Honda Accord 2010 is showing P0135. I replaced the O2 sensor with a brand new O2 sensor, still the code is still showing and my fuel consumption seems worse than before.

Also my RPM is high.

What can I do?

Hello everyone,

My Honda Accord 2010 is showing P0135. I replaced the O2 sensor with a brand new O2 sensor, still the code is still showing and my fuel consumption seems worse than before.

Also my RPM is high.

What can I do?

Thank you for your comment. I stay on the Mainland. I guess that is why I should start from.

Please how much is the Hackey permit and inspection fee?

Do I need to change my vehicle registration to commercial?

northbird:
Start with the main apps.. Uber/Bolt.

Don't chase targets.

Work only when there's surge. As a newbie, if you are working on Bolt/Uber without surge, you are just flogging the car with minimal gains. E hailing cpys won't tell you this, they are just going to confuse you with deceptive ads on Facebook .

Go to areas you know and are familiar with.
If you reside on the island. I will advise you take trips only on the island for now.
If you need a list of all the terrible areas. Go and read back on the thread .

Thank you for your response. Much appreciated.

However, do you think I should choose InDrive over Uber? Or I should register on both.

Due to my inexperience, I was thinking that I should go for a platform that helps me estimate the trip fares as I am not knowledgeable about prices that would favour me.

Glithronix:
Since you do 9-5, take Saturday and Sunday for test-running the hustle. These two days would be a perfect run for you as a starter.
All documents required, you have them already.
Just download the indrive and follow the steps in registration, no special document required, only the ones you already have.
To your last question, download indrive and start the registration, whichever one you encounter and don't understand, screenshot and post it here, you would get support.

Much respect, sir.

Good evening everyone.

How was our day?

I am new here and I need your guidance.

I own a Honda Accord 2010 and I want to start doing Uber (only) on Saturdays majorly. I don’t know if I would be able to add Sunday. I have a 9-5 job.

Please share all the possible advice with me as I have mostly been a rider.


What documents would I need? Is there a thread on the registration steps?

Thank you for your help

Good day everyone.

Please I would like to know the price of the following items for Honda Accord 2010.

Master brake replacement
Power steering replacement
Catalyst
Kick starter

I want to compare it with the price my mechanic will quote

Okay. I will

Thanks

Bullfallo:
google map is not correct. Goggle map was telling me 2.7 miles but when i enter the journey my trip meter is 10 miles. Use ur trip meter not google map

I don’t think I am doing 16miles per gallon. It is more.

About 23 litres of fuel barely last me for three days trip to the office and back home. My office and back home is about 39kms (25miles) according to Google maps.

By your statement, 23 litres (6 gallons) should do approximately 4 days to and fro.

Bullfallo:
check your fuel consumption if you have 16 miles per gallon. Just ignore that check engine light. Otherwise you will be wasting money even more than the fuel you were trying to save. When car is old alot of things will not work correctly. I have spent alot pf money worrying about that engine light. If it’s not blinking and car drives fine just relax

Lagos. Mushin/Surulere side

jceesquare:
Location?

I need help.

Anytime I press brake while driving, the hand brake light comes on. What can be the reason?

Also, my car consumes fuel aggressively. I have changed the O2 sensors but the errors still appears. Who can help with a technician that can assist with O2 sensors and AF (P1157 code)

I have resolved this issue.

Took it to another mechanic and they did their thing.

They said they changed the switch but I doubt they did that but suspect they did some programming of the switch I changed recently. Or they did change the switch and also did the programming

XPaul:
I am experiencing this issue in my Honda Accord 2010.

I have changed the switch, change gear oil and also checked the wires but my D is still blinking

Please anyone with help.

I am tired

I have done that severally. I have a scanner, I even went to Ladipo to use a bigger machine to clear the error code after changing the switch.

My gear changer (inside the car) gets hot, I don’t know if this is normal.

vivalavida:
Try and clear the error code with a scanner. It might just stop

I am experiencing this issue in my Honda Accord 2010.

I have changed the switch, change gear oil and also checked the wires but my D is still blinking

Please anyone with help.

I am tired

jacobian01:
thanks sir, I just changed my oil. And the technician helped me to wash the solenoid too. The blinking still continues. He got one tokunbo from gate but the blinking in D4 didn't stop. The code showing is P0843 and P0848

Good day

Do you have the 3rd clutch transmission switch for error code P0848 for Honda Accord 2010 and how much is it?

Also, how much is Honda DW-1?

Good afternoon.

Please do you know how much A/F sensor for Honda Accord 2010 cost?

nurey:
A/F sensor are available depends on the vehicle model and year, each vehicle model has it's part number one doesn't fit all

Yes

codemaster2much:
waoh, so yours was Euro. shuut, is the Euro one with the one with the Honda civic type of engine? 2.0 liter?

Omo...... Like 600k oh.

Apparently there is difference between Honda Accord 2010 Euro & USA.

USA gear is like 180k while Euro (mine) is like 550k - 600k

codemaster2much:
Please boss, how much to change the complete gear for that car?

I will scan and share here.

kingreign:
Hope the part seller is aware of the problem and gave you a warranty?
Scan the gear and post codes here let's assist.

Hi all,

I use Honda Accord 2010 Euro. I have two issues I need assistance with from

1. I recently experienced an A/C issue. I took my car to the carwash and they did a full wash (including the engine). After the wash, my A/C does not get cool/cold like before. It just blows air.

2. I changed my gear on 19 October 2023. My transition is smooth. However, whenever I accelerate quickly and then come to a stop due to traffic or cars ahead slowing down, I experience difficult accelerate back until I change my gear to Reverse (it then jerks) and then change back to Drive (it jerks again). It is barely two weeks that I changed the gear completely and the mechanic said I should give it like two weeks. I have mentioned it to the mechanic that changed the gear but I want other opinion on what could be wrong.

Does anyone have any understanding of what I am experiencing in both situations.

Hi all,

I have an update, I have changed my gear completely.

However, I have a different experience now.

When I accelerate quickly and then come to a stop due to traffic or cars ahead slowing down, I experience difficult accelerate back until I change my gear to Reverse (it then jerks) and then change back to Drive (it jerks again). Does anyone have any understanding of what I am experiencing.

It is barely two weeks that I changed the gear completely and the mechanic said I should give it like two weeks.

XPaul:
I am currently having this issue with my Honda Accord 2010.

It revs to like 3500 - 4000 sometimes. I try to accelerate gently to avoid this issue but it jerks when it is changing gear.

My mechanic said I should change the gear (@NGN 600k) but I dont have that money.

Also, the D (Drive) light blinks.

How can I fix this issue

Thank you for your response.

I bought them second hand last year Nov. Seller said they were 4months used as at that time.

Battery chemistry is Tubular. I have attached an image of my battery

Hero2t:
What is your battery chemistry? AGM, Gel or tubular?

How old are the batteries? Did you buy them brand new?

When you have resolved the issue, please never discharge lead acid batteries below 50% of capacity. It shortens the lifespan.

Hi all,

I have an inverter system (without solar) made up of the 2 220v batteries and Lumous inverter. I charge it from the power supply and it used to last for more than 24 hours when I use it for my internet stuff and charging laptop.

However, there was a time I didn't have light for 3 days and I exhausted the juice in the battery. After that time, I saw a message on my inverter "Cbl" and since then, my inverter does not last more than 2hours.

Who has experienced this and how can I resolve this.

Good day everyone,

Please can I get a quote for Honda Accord 2010 mirrors with light (if you can help with the quote picture that contains your store name and details, I would appreciate, it is for insurance purpose..)

p0848

dicksonadams:
what are the scanned codes

Yes, I got p0848

kingreign:
Have you scanned the transmission?

Revs and then drop back instantly

GAZZUZZ:
Revs or slips ?