Being a Celebrity is great.
Every Celebrity wants ease and comfortability at what they do and in their complete lifestyle. Doing things manually and with stress is not in anyway desirable to a true Celebrity but having things done or operated 'Automatically' is the in-thing anywhere, and of course, anytime!

If you live in an area where power supply is erratic and you are faced with the task of frequently manually changing your mains (PHCN or NEPA) cutout from one failing phase to another, then you need an ELECTROKRISTRON AUTOMATIC PHASE CHANGER!

Electrokristron Automatic Phase Changer is an intelligent unit that monitors all phase supplies (3 phases) to your apartment, shop or office.

It connects you to the public power supply on any of the other available phase connections.

On the event of power outage or phase failure on the existing phase, it automatically transfers (switches over) your load to the next available (working) phase.

It comes incorporated with an inbuilt phase presence monitor that monitors all 3 phases of the public supply lines to ascertain which ones are dead and which are active thereby switching you off dead phases and on to active phases, all without human intervention.

Highlights of ELECTROKRISTRON AUTOMATIC PHASE CHANGER:
* Automatically changes over from a dead phase to a live phase for continued supply of power to your load, building or apartment
* 3 phase supply in, 1 phase output to load/equipment
* Inbuilt phase and voltage monitoring sensors
* Automatic dead phase detection
* Automatic load transfer to live/active phase
* Load isolation switch incorporated (The product can serve as a load isolator, totally cutting off mains power from your load)
* User friendly phase selector switches (to manually select any phase of your choice, this is an 'Automatic mode' over-ride function)
* Capacities available: 60 Amps and 100 Amps, 220v - 240V (Call for higher capacities)

Place an order today.

Electrokristron Automatic Phase Changer is built with durability, safety and efficiency in mind in such a manner as to reduce downtime to the barest minimum and better still, to eradicate failures totally. The unit is built with user-friendliness and ease of use in mind as it has features to help the user overcome downtime/failure issues (if these ever occur) as quickly as possible.

Apart from an internal protective and rugged circuit that powers the unit, additional special features were incorporated into the design and these include the following:

Special Features:

1.Inclusion of 'Automatic Mode Over-ride' Switches: Three (3) separate switches are added on the front panel of the unit below the Phase voltage level indication meters to toggle the unit from 'Automatic Phase Selection' Mode to Manual 'Phase Selection Mode'.
This is also called 'Automatic Mode Over-ride' function and what it means is that as a user, you can switch the unit to manual mode and thereby manually select any particular Phase of your choice.
This option/function can be useful if there is an internal fault on one of the Phase lines or if for any strange reasons, the 'Automatic' function fails, you could just switch to another Phase manually.
See the three (3) separate 'Automatic Mode Over-ride' Switches on the front of the unit in the attached picture below, one for each phase.
2. Three (3) totally independent control circuits power the unit internally.
These control circuits are not linked together and failure on one control circuit does not affect the operation of the other two as each of the 3 control circuits handle each of the 3-Phase Supply Input Lines.
This feature of separated control circuits eliminate, as much as possible, total failure of the entire unit in the event of a fault on any of the individual control circuits.
3. Three (3) separate easy to replace miniature 1 Ampere fuses installed at the underside of the unit for quick and easy maintenance in the event of a fault.
These three fuses are linked to the three independent internal control circuits and when a fuse blows, its failure does not interfere with the continued operation of the rest.
1 Ampere miniature fuses (Also written as 1A or 1 Amp fuses) are very common and can be found around us easily... It is the type of fuse found on most electronics gadgets and I believe you must have seen one on the back of your TV/Refrigerator Stabilizer at one point or the other in time. If any of the fuses get blown, just locate the blown fuse on the underside of the unit, replace it and the unit should come completely alive again. If the fault persists, contact a qualified technical personnel to find out the exact reason the fuse continues to blow/cut. See the three (3) separate fuse points on the underside of the unit in the attached picture.

Prices:
63AMPS : N60,000
100AMPS : N80,000
200AMPS : N150,000

Mini-Version
16AMPS : Call for price

3-IN-1 E-ATS MODEL, CAPACITIES AND PRICES:
(3-in-1 Model. Example: For Generator1, Generator2 and MAINS/NEPA/PHCN)

63AMPS : Call for price
100AMPS : Call for price
200AMPS : Call for price

Other products available on request:
Electrokristron Automatic Phase Changer 100Amps : Call for price
Electrokristron Inverter Interface Unit (EIIM): Call for price

DELIVERY WITHIN 2 DAYS IN LAGOS (FOR ORDERS OUTSIDE LAGOS, DELIVERY COULD TAKE 2-5 DAYS)

Electrokristron Automatic Phase Changer is very rugged and durable. The one (1) year warranty is an added plus for all our customers home and abroad, in Lagos or outside Lagos.
Call today to find out more or to place an order

For more details and orders, pls visit https://www.electrokristron.com/electrokristron-products or call +234-9011386383 or send an email to electrokristron@gmail.com

ELECTROKRISTRON AUTOMATIC CHANGEOVER UNIT is the way to go for your safe electrical power source interchange and 'Power blackout management' options both at domestic and industrial levels.

Order one to replace the manual changeover you currently have. It is very safe for your family as it is fully automatic and your wife or children will never have to physically touch or operate a dangerous manual changeover (that might shock them) anymore

FEATURES AND BENEFITS:
1. It automatically connects your home/office/factory to your Generator whenever public supply fails
2. It automatically changes from Generator mode to PHCN/NEPA mode when public power supply is restored.
3. It automatically STARTS your Generator when public power supply fails (No need to go out in the rain or dead of night to start your Gen).
4. It automatically turns OFF your Generator as soon as PHCN/NEPA is restored (No need to go out late in the middle of the night to turn off your Gen)
5. It can be used to interchange load between various types of power sources including WIND TURBINE/MILL, INVERTER, SOLAR POWER UNIT, two or more separate GENERATORS, PHCN/NEPA etc.
6. It can be used on small or big 'sound proofed' Generators (MIKANO, Marapco etc), key-start or button-start types
6. Unlike other brands that just switch between Gen and PHCN/NEPA, our brand of automatic changeover acts as an intelligent Robot (When installed with our special ELECTROKRISTRON INVERTER INTERFACE MODULE, EIIM) such that:
(a) It switches to INVERTER mode when PHCN/NEPA fails, allowing your Inverter to run and operate for expected number of hours BEFORE starting your Generator automatically thereby saving you running costs on Generator fueling and maintenance.
(b) It Monitors your Inverter batteries continuously to ensure they do not drain beyond a safe preset but adjustable threshold value typically 10.5Volts per battery.
(c) Immediately Inverter batteries attain the threshold level (at 10.5volts, for instance), ELECTROKRISTRON Automatic Changeover starts your Generator and switches over to GEN mode, allowing your Inverter batteries to start recharging.
(d) As soon as PHCN/NEPA is restored, the changeover unit changes over to PHCN/NEPA and stops your Generator, saving fuel, while your Inverter batteries continue to recharge.
7. You can turn off the feature ('AUTO MODE') that automatically starts your Gen on power outage and put the unit on 'USER MODE' (also known as 'Manual Mode') so that you as the user could start your Gen only when you need it running.
8. You can choose to ALLOW or DISALLOW PHCN/NEPA supply (especially in low voltage situations) through the available front switch on the unit which serves as a Public Mains Power Isolator switch.
9. 3-in-1 Model also available for three (3) separate power sources changeover operations such as for premises with Generator 1 (SOURCE 1), Generator 2 (SOURCE 2) and Public Mains (SOURCE 3).
10. Electrokristron Automatic Changeover units (and our other products) can be customized for your peculiar power management needs.

ELECTROKRISTRON Automatic Changeover Units (also known as Electrokristron Automatic Transfer Switch, E-ATS) are very versatile, strong, durable and efficient.

Available as 3-phase units (Can be used in 1-phase situations too), with 1 year warranty.

Sales are still on.

Take advantage of the currently ongoing Electrokristron Power Systems product sales to avail yourself the opportunity of buying your Electrokristron Automatic Changeover (also known as Electrokristron Automatic Transfer Switch, E-ATS) for your home, office or site.

Available as 3-phase units but can also be configured (looped) to work as 1-phase units for effective operation in single phase (50Hz 220V AC) environments.

See capacities and prices below:

2-IN-1 E-ATS MODEL, CAPACITIES AND PRICES:
(2-in-1 Model. Example: For Generator and MAINS/NEPA/PHCN)

63AMPS : Call for price
100AMPS : Call for price
200AMPS : Call for price

Mini-Version
16AMPS : Call for price

3-IN-1 E-ATS MODEL, CAPACITIES AND PRICES:
(3-in-1 Model. Example: For Generator1, Generator2 and MAINS/NEPA/PHCN)

63AMPS : Call for price
100AMPS : Call for price
200AMPS : Call for price

Other products available on request:
Electrokristron Automatic Phase Changer 100Amps : Call for price
Electrokristron Inverter Interface Unit (EIIM): Call for price
DELIVERY WITHIN 3 DAYS IN LAGOS AND 3-5 FOR ORDERS ANYWHERE ELSE IN NIGERIA
(DELIVERY TO LOCATIONS OUTSIDE NIGERIA COULD TAKE UP TO 7 DAYS).

ALL ELECTROKRISTRON PRODUCTS COME WITH 1 YEAR WARRANTY.
Products come with well detailed installation & user manuals and are easy to install by your Electrician or qualified Technical personnel.

For more details and orders, pls visit https://www.electrokristron.com/electrokristron-products or call +234-9011386383 or send an email to electrokristron@gmail.com

Get our 120Amps 3 Phase Automatic Changeover (ATS) with inbuilt Inverter Battery Voltage Monitoring Interface Module (EIIM).

FEATURES AND BENEFITS:
1. Unlike other brands that just switch between Gen and Public Mains (NEPA/PHCN in Nigeria), our brand of automatic changeover acts as an intelligent Robot (with special inbuilt INVERTER BATTERY VOLTAGE MONITORING INTERFACE MODULE, EIIM) such that:
(a) It places your Gen on hold when Public Mains fails, allowing your Inverter to run for the expected number of hours before the Gen is started; thereby saving you running costs on Generator fuelling.
(b) It Monitors your Inverter batteries continuously to ensure they do not drain beyond a safe preset threshold value set by you, typically 10.5volts per battery
(c) Immediately Inverter batteries start getting drained below the preset threshold level (at 10.4volts, for instance), ELECTROKRISTRON Automatic Changeover starts your Generator and switches over to GEN mode, allowing your Inverter batteries to recharge
(d) As soon as PHCN Public Mains is restored, the changeover unit changes over to Public Mains and stops your Generator, saving fuel, while your Inverter batteries continue to recharge.
2. You can turn off the ‘Gen AutoStart’ feature (AUTO Mode) that automatically starts your Gen on power outage and put the unit on USER MODE which allows you start your Gen only when you need it on.
3. The two digital displays on the front of the 120Amps Electrokristron Automatic Changeover unit allows you to check the voltage status of your Inverter Battery and the supplied the general output voltage to your loads.
4. It automatically connects your home/office/factory to your Generator whenever public supply fails
5. It automatically changes from Generator mode to Public Mains mode when there is public supply.
6. It automatically starts your Generator when public power supply fails (No need to go out in the rain to start your Gen)
7. It automatically turns off your Generator as soon as PHCN/NEPA is restored (No need to go out late in the middle of the night to turn off your Gen)
8. It can be used to interchange load between various types of power sources including WIND TURBINE/MILL, INVERTER, SOLAR POWER UNIT, between Two GENERATORS, PUBLIC MAINS etc.
9. It can be used on small or big 'sound proof' Generators (Tiger, Elemax, MIKANO, Marapco etc), key-start or button-start types
10. Able to operate in low voltage situations (Works with Public Mains as low as 160V)
11. 120A Model available as 3 Phase 220V 2-in-1 (2 Power Sources) unit.

Call for price (2-in-1 Model, 2 Power Sources)
Rating = 120Amps, 3 Phase, 220V, AC 50Hz[/b]

Other Models:

2-IN-1 E-ATS MODEL, CAPACITIES
(2-in-1 Model. Example: For Generator and MAINS/NEPA/PHCN)

63AMPS : Call for price
100AMPS : Call for price
200AMPS : Call for price

Mini-Version
16AMPS : Call for price

[b]3-IN-1 E-ATS MODEL, CAPACITIES AND PRICES:
(3-in-1 Model. Example: For Generator1, Generator2 and MAINS/NEPA/PHCN)

63AMPS : Call for price
100AMPS : Call for price
200AMPS : Call for price

Other products available on request:
Electrokristron Automatic Phase Changer 100Amps : Call for price
Electrokristron Inverter Interface Unit (EIIM): Call for price


ELECTROKRISTRON PRODUCTS COME WITH 1 YEAR WARRANTY.
Products come with well-detailed installation & user manuals and are easy to install by your Electrician or qualified Technical personnel.

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Welcome to our new office!

Electrokristron Automatic Changeover Units are still selling hot.

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

This is one of the things that I am glad for... Self employment, doing what I know how to do.

Designing and building Automatic Transfer Switches (ATS) also known as Automatic Changeover Switches (ACS).
Different sizes, different models, different purposes and different capacities... AC, DC, single pole. 3 pole. high load rated, low load rated etc.

I know a lot of you guys have been looking around, waiting and wondering what to do till you find a better employment somewhere but perhaps, you were meant to be an employer of labour instead.

You can employ yourself with this:
Learn to design and produce ATS units and other power automation products.
Create an income stream for yourself if the other job refuses to come inspite of your efforts.
Don't just sit idle... time waits for no one.


Learn online how to design, build and sell ATS/Automatic Changeover units.

You really don't want to miss this opportunity, only available for a limited time.

Join the ongoing training course now>> https://www.freelancersnigeria.ng/learnit/course/how-to-build-ats-or-automatic-changeover-switch/

PLACE ORDER @ www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Electrokristron products are still selling.

[b]ORDER FOR YOURS TODAY!

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Electrokristron products and training courses are still selling.

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

EPBWiz is short for Electrokristron Product Builder Wizard.

It is a special ATS configuration wizard on our website designed to help our customers configure and put together multiple options and features that best suit their power management needs.

At Electrokristron Power Systems, we understand that different end users have varying needs. Suffice is to say a particular ATS design may not meet the power management needs of our various customers and prospective end users.

While shopping for a suitable Automatic Transfer Switch on our online shop, EPBWiz eases the shopping process and reduces the product search time dramatically by presenting you with a list of options and features that you may want to include in your custom ATS product order.

These options and features when put together by EPBWiz based on your preferences and selections form the PRODUCT SPECIFICATIONS of your ATS custom design request.

Once your order is confirmed, our design and construction department set to work, using your customized product specifications submitted through EPBWiz to build your ATS or related products right away.

The process is further streamlined for better user experience by looking at and implementing any additional custom request notes that you may have submitted along with the product specifications, all through EPBWiz.

For instance, while you may ask in the product specifications that your ATS be built with a GEN SCHEDULING TIMERS, in the custom request notes, you may ask that we program the Timers to schedule your two (2) generators in such a manner that Small Gen runs from 4.30am – 8.30am while Big Gen runs from 7.00pm till 1.00am. This means that asides incorporating Gen scheduling function (Timers) in your custom ATS design, the ATS will come already programmed to rotate the use of your two generators based on your time preferences, given that Mains power is not available at those times.

The EBPWiz options menus also allows you to make informed decision as it displays the cost implications of your custom ATS order based on your chosen option. You can simply up-build your ATS for best options or down-build with fewer options for an ATS that meets your budget. Either way, you are in control, as you can always add more options or reduce accordingly to meet your budget and power management needs.

The timeline from when an order is confirmed to when we deliver the finished product to you is typically between 4 to 10 business days. Deliveries within Lagos are usually faster while those to other regions in Nigeria may take a little longer than 4 days.

See more images and order details here:
https://www.electrokristron.com/product/personal-product-builder-3-in-1-ats-build-in-your-options/?pk_campaign=webpost-nairaland&pk_kwd=EPBWiz&pk_source=nairaland&pk_medium=click&pk_content=id-3in1-p


For more details and orders, pls call +234-9011386383 or send an email to electrokristron@gmail.com

10% discount offer currently ongoing on our products at Electrokristron Power Systems.

Get your ATS (Automatic Changeover Switch) of different sizes, configurations and

capacities from us today while offer lasts.

See more details on the flier attached. (Flier below)

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

*** Number above is available on WhatsApp Messenger ***

Still selling

Our products are still selling...

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Our products are still available...

Got questions? Contact us today.

Visit our website: https://www.electrokristron.com/

Our products are still selling...

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

New Electrokristron 400A 2-IN-1 ATS outlook


Order for yours today @ www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Our Products are still selling...

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Units are still selling...........


For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Electrokristron Automatic Changeover Units are still selling hot.

Order for yours today or make enquiries:

Just tell us what options you need, we shall add them to your product as we build it.

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Place a call or send us an email to ask questions or place an order for your Automatic Transfer Switch (ATS) or Automatic Changeover which automatically STARTs and STOPs your Generator depending on Mains (NEPA/PHCN) availability. Several other features and options available as well.
Just tell us what options you need, we shall add them to your product as we build it.

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Our Products are still selling...

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Units are still selling...........


For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Electrokristron Automatic Changeover Units are still selling hot.

Order for yours today or make enquiries:

Just tell us what options you need, we shall add them to your product as we build it.

For more details and orders, pls visit www.electrokristron.com or call +234-9011386383 or send an email to electrokristron@gmail.com

Units are still selling...........

Order for your Electrokristron Automatic Changeover/Automatic Transfer Switch (ATS) today.

Happy New Month Great People!
Our products at Electrokristron Power Systems are still available for you.

We provide customized Power Management and Automation Control Panels and Switching solutions.


Our typical product line includes:
1. Automatic Transfer Switch, ATS ( Automatic ChangeOver)
2. Combined ATS / MTS ( Combined Automatic ChangeOver and Manual ChangeOver)
3. Automatic Phase Selector ( For NEPA/PHCN 3-phase cutout or fuse)
4. Inverter Battery Voltage Monitor ( Automatically starts Generator when inverter battery voltage drops to a preset threshold)
5. Power Supply - Phase and Voltage Monitor
6. Wireless START/STOP Control and Automation for Generators
7.Automatic Generator Selector Box (Useful for multiple Generators on single site)
8. Scheduled timing control box for Generator(s) or load(s)
9. ETC... Ask us for a customized solution to meet your peculiar needs and we shall build it for you.

Contact us today with your power management/automation requests or needs and we shall build an appropriate solution for you irrespective of the number of power sources in question.