₦airaland Forum

How to remove lamination from a certificate” you get a lot of information on the lamination process , some wet blankets ( can’t be done, just apply for a new certificate ) and a couple of brave hearts who suggestipping your certificate in hot water or even better, solvent.

But here ladies and gentlemen is the patented ( not to mention tested ),painless, totally guaranteed, five minute  method of DIY delamination.
Equipment needed – Certificate to be delaminated ( duh ! ), a sharp pair of scissors and a hair dryer
Step 1

Cut the edge of the plastic as close to the certificate as possible without cutting the paper.
Step 2
Carefully examine the cut edge and find a gap between the plastic and the paper. Enlarge the gap with your nail or a safety pin, taking care not to peel paper.
Step 3

Use the hair dryer to gently heat the cut edge and carefully peel off the plastic. I think the heat melts the adhesive and makes the process totally smooth.

.

Waiting for confirmation

got ma original WAEC result squeezed while laminating it last week. I hope this suggestion works

OP! If hin tear or wrinkle during this step by step process na you go pay for damages o

Ok who has tried it?

Thanks greatly

muhabab:
got ma original WAEC result squeezed while laminating it last week. I hope this suggestion works

Sametyn happened to me 2008, wen laminating my waec cert, instead for my certificate to come out at the other end, it was flame coming out... come see as i shout eehhh... since den i don dey fear laminating machine....

Someone should please try it and get back to us.
I won't use my call to bar certificate to carry out the experiment.

Thank you.

Adeoba10:

Sametyn happened to me 2008, wen laminating my waec cert, instead for my certificate to come out at the other end, it was flame coming out... come see as i shout eehhh... since den i don dey fear laminating machine....

oh mine, that was funny... pele.

Op, thanks for sharing.

caveat emptor

Thanks for the info

Afritop:
OP! If hin tear or wrinkle during this step by step process na you go pay for damages o

Disclaimer: delamination is at delaminator's risk

Adeoba10:

Sametyn happened to me 2008, wen laminating my waec cert, instead for my certificate to come out at the other end, it was flame coming out... come see as i shout eehhh... since den i don dey fear laminating machine....

hard luck bro...did u request for another cert?? coz mine is nt presentable at all. *suya paper better pass am sef*

fr3do:


Disclaimer: delamination is at delaminator's risk

That one no concern me, OP did not post that in his write up tutorial

KEVIND:
How to remove lamination from a certificate” you get a lot of information on the lamination process , some wet blankets ( can’t be done, just apply for a new certificate ) and a couple of brave hearts who suggestipping your certificate in hot water or even better, solvent.

But here ladies and gentlemen is the patented ( not to mention tested ),painless, totally guaranteed, five minute  method of DIY delamination.
Equipment needed – Certificate to be delaminated ( duh ! ), a sharp pair of scissors and a hair dryer
Step 1

Cut the edge of the plastic as close to the certificate as possible without cutting the paper.
Step 2
Carefully examine the cut edge and find a gap between the plastic and the paper. Enlarge the gap with your nail or a safety pin, taking care not to peel paper.
Step 3

Use the hair dryer to gently heat the cut edge and carefully peel off the plastic. I think the heat melts the adhesive and makes the process totally smooth.

You think? Meaning you never try,never know or not sure?

@All, Do it with Care. You May try it out with non-important documents you laminated if you doubt it before you go on with your vital document.N/B, its not scientifically proven but if it is done with Extreme Care you'll get a positive result.

muhabab:
hard luck bro...did u request for another cert?? coz mine is nt presentable at all. *suya paper better pass am sef*

We unscrewed the laminating machine, come remove my certificate.... bad day devil drink water, and am xpected to show up d following day for oral interview... i jux pack am go like that....

Just incase.....FP

Adeoba10:

Sametyn happened to me 2008, wen laminating my waec cert, instead for my certificate to come out at the other end, it was flame coming out... come see as i shout eehhh... since den i don dey fear laminating machine....

#CEMENT!!! 300 BAGS MINIMUM, NO MAXIMUM.

will try it maybe on my death certificate lter in life.

I dont laminate my certs, just put them in a file and put it in a safe place, dazall

Testifiers