Lekan239:
let's say a standard self contain takes 700 blocks, it might not be upto 600blocks

(1) 700 x 250= 175,000

700block÷70 will give you the required number of cement to lay the block= 8bags of cement

(2) 15bags of cement x 4,500= 67,500

(3) you can run half DPC

(4) 1 trip of plaster sand will be enough at 35k

(5) Gravel 1 tipper, there will be leftover 50k or less

(6) iron and wood for lintel and pillars plus workmanship for a self contain budget 60k

Taking a house to lintel level is not quite expensive and very easy. The main spending comes in after lintel level.

So with 500k or less you will get a self contain to lintel level.

You are paying community 250k for building a self contain. For what?

Lekan239:
did you do it recently, and does the 750k include the material for the screeding?

By my calculation 750k for 1088sqm. Therefore 750,000/1088

Which give us 690per sqm.

Charisdesigns:


What we do

Architecture | Engineering | Construction

https://www.nairaland.com/6781323/construction-droyal-apartments-charisdesigns/2



08027314343

sethtsadopp:


Yes, EVERYTHING.

BrickDevo:
kitchen interior design for those that do

Nomyth:


Hello,

If u are to do something like this, same size, same material for me, how much am I looking at?

BrickDevo:


Somwhere be 350k to 500k, depending on the location

Lekan239:
ok thanks

sethtsadopp:


Apologies, it was actually 800k.

And they are still on it as we speak. Should be done my tomorrow or next.

Person2person:


I doubt the budget with the current cost of materials.

abuiltech:


1- Clean your tanks
2- Incorporate filter to the pipe network,

UC92:


Your roof frame is done and ready to receive covering. At this point reducing the height means that you will have to dismantle all the rafters, purlins,kingposts, structs, ridges and valleys as all would be affected. Practically you are starting a new roof frame.

Roof pitch is a factor of design. Assuming you wanted a high or low pitch roof, you should have monitored the kingpost at the design and formation stage and not now that the job is 100 percent done.

Cost of deconstructing this roof frame may be as much as the cost for constructing the frame.

sethtsadopp:
Please I got this quote from my cabinet person. Can expert's in the house help me peruse it. It looks high to me o. This is for ONLY Kitchen.

BrickDevo:


Somwhere be 350k to 500k, depending on the location

michlins:
the best time to buy cement is during and end of rainy season. By October and November, people are rushing to complete their projects and so demand will push prices. With no government agency controlling price, consumers suffer the effects.

Only if roads are motorable.

Lekan239:
Who can do something like this for me in Ado-Ekiti. And how much should I be budgeting?

Shuggaa:


Can we talk on whatapp Sir, just sent you a pm

N/b;this will cost you 2.5m for this size.

BrickDevo:
please chat me up on WhatsApp 07061030782

Lekan239:
Who can do something like this for me in Ado-Ekiti. And how much should I be budgeting?

Lekan239:
Goodluck. I have been active on nairaland for the past 13years I can differentiate between a scammer and a non scammer on nairaland

edward2018:
.

Tunward project consult will replicate this for you. The budget will base on the size of your kitchen, as any amount call at present will surely be over or under. Let get the actual measurements of your kitchen. You can contact us through our WhatsApp +2347031571105

Lekan239:
Goodluck. I have been active on nairaland for the past 13years I can differentiate between a scammer and a non scammer on nairaland

edward2018:
.

Tunward project consult will replicate this for you. The budget will base on the size of your kitchen, as any amount call at present will surely be over or under. Let get the actual measurements of your kitchen. You can contact us through our WhatsApp +2347031571105

BrickDevo:
and i also want you to do image reverse search, if you see any of my design pics in my thread elsewhere online, then be rest assured it was stolen from me, any images i post on here is strictly my design.

Lekan239:
kitchen size in picture below

BrickDevo:
nice floor plan, it will need a new design, but similar cabinet faces and cabinet doors will still be maintained

Lekan239:
yes it does not necessarily need to be a replica of the one I posted earlier. MFC was used for that, using same MFC or MDF what budget can you work on to give good and simple design for my kitchen?