XMAS PROMO!!!

Quanta 200a battery ....N122,000

CALL US NOW ......
081-350-31951

-Schneider Homaya 1500va 24v Solar Hybrid inverter System.

Price: N79,000 N75,000

Quick Overview
Proven value for off-grid, backup power and self-consumption

ConextTM SW is perfect for off-grid, backup power and self-consumption applications, it is a pure sine wave, hybrid inverter system with switchable 50/60 Hz frequencies, providing power for every need. For expanded off-grid capacity, the Conext SW is integrated with fuel-based generators as required to support loads larger than the generator’s output.

It’s also self consumption ready, able to prioritize solar consumption over the grid, while maintaining zero grid export. The Conext SW works with the grid to avoid peak utility charges and support the grid when utility supply is limited. Accessories include pre-wired universal DC distribution panel and AC distribution panels. Stacking two Conext SW units will double the system’s total output power and available solar charge controllers allow for the integration of solar capacity as required.


Technical Specifications

⦁ Output Power: 1500VA
⦁ Nominal Battery Size & Voltage: 24V, 100Ah to 200Ah
⦁ Recommended Solar Panel: 1000Wp, 24V with OCV of 35V to 45V
⦁ AC volatge: 230V AC, 50Hz
⦁ DC Output: 12V 5A
⦁ Charger: 10A
⦁ Supported battery types: Tubular Flat plated Flooded, AGM, GEL, VRLA Battery
⦁ Operation temp range: -20°C to 65°C
⦁ Dimensions (mm) (LxBxW): 375 x 315 x 135



-Trojan SAGM 06 375 (Solar AGM Battery 6V 375Ah)

Price: N175,000 N170,000

Quick Overview
Model: SAGM 06 375
Battery: AGM VRLA Maintenance Free
Capacity: 6V 375Ah / 20Hr Rate

Cyclic Use: 30% DOD - 3250 cycles
Cyclic Use: 50% DOD - 1750 cycles

Dimensions (LxBxH): 296mm x 176mm x 414mm

Terminal Height: 406mm

Weight: 52kg

Absorbtion Charge: 14.40V, Float charge: 13.5V

Color: Maroon (case/cover)

Material: Polypropylene

-Trojan 12v 205a AGM battery ..... N170,000


Contact,
Smartcell,
081-350-319-51

Either Niyi or someone spoke about requirements to power a 2000W hot plate
What's your take on powering such load with a 24V@200Ah for 30min daily.
Thank you contributors.

I want to thank Oga George for his recommendations.
One of my setups has finally retired after meritorious service of 5yrs. 48V@160Ah Zenith batteries.
I need recommendations for recruitment, long service not short service please.

pheleix:
Either Niyi or someone spoke about requirements to power a 2000W hot plate
What's your take on powering such load with a 24V@200Ah for 30min daily.
Thank you contributors.

practically, your 24V, 200AH will die before 30 minutes... Cheers.

So to Giving back my Installation:
. My Solar Systems comprises of the following
1. 15 Pieces of EcoDelta 280Wp Poly Solarmodule
2. 1 complete all in one Inverter FSP502PV-230F-48v Off-Grid
3.100m of Solar cable 4mm black
4. ECO-WORTHY 6 String PV Combiner Joint Box & 15A Circuit Breakers for Solar Panel
5. pylontech US2000B plus 48v
6. ICC software for monitoring
7. Diverses Circuitbreakers and accessories

we had to install under the following conditions:
3S5P
That means 3 panels in series AND 5 IN Parallel to get 4200kwh

all straight to the combiner box and then about 10 metres to the power house to inverter and battery

The inverter has a surge capability of 10kva double the inverter Kva
I will be showing installation pics and the challenges that croped up

link to the inverter properties
https://www.fsp-group.com/download/pro/EssenSolar_Datasheet.pdf

pic of the Panels

Dam5reey:


practically, your 24V, 200AH will die before 30 minutes... Cheers.

Was of the thought it would drop to say 70 to 80% soc.
More calculated, practical and experience inputs please.
Thanks

pheleix:

Was of the thought it would drop to say 70 to 80% soc.
More calculated, practical and experience inputs please.
Thanks

My guy, Dam5reey has given u both practical and theoretical end of your batteries, why ask again?
@ 24v 200ah u re supposed to pull 10a savely from ur batteries, u re now talking of pulling around 84a! After such successful pull, d life of ur batteries will never remain the same. I may be wrong though, since this is a DIY, kindly do that experiment on ur batteries and report back to the house, who knows u can be right.

desiji:
So to Giving back my Installation:
. My Solar Systems comprises of the following
1. 15 Pieces of EcoDelta 280Wp Poly Solarmodule
2. 1 complete all in one Inverter FSP502PV-230F-48v Off-Grid
3.100m of Solar cable 4mm black
4. ECO-WORTHY 6 String PV Combiner Joint Box & 15A Circuit Breakers for Solar Panel
5. pylontech US2000B plus 48v
6. ICC software for monitoring
7. Diverses Circuitbreakers and accessories

the 4mm cable, is it to connect the panels to the PV combiner box or to run from the PV combiner box to the SCC?

don't want to believe it's the later

mcTrinity:


the 4mm cable, is it to connect the panels to the PV combiner box or to run from the PV combiner box to the SCC?

don't want to believe it's the later

it is definetely from panels to combiner box

Before the products were bought, a thorough investitation was done with the company that was supplying the product from Germany.
all the Gadgets were bought from a renowend company of Solar in Germany

panel statistic

we did the installtion at Night

Dam5reey:


practically, your 24V, 200AH will die before 30 minutes... Cheers.

Valid point ! 2kw load is a kill on the short run ....

chris81964:
Can anyone tell me something about these inverter.
Thank you in advance. I know is is a Prag 24V. Adjustable current and Voltage? Adjustable LBCO?

This is in addition to Oga Niyi's ...... From the picture its a 4kva (3kw) 24v inverter. It's low battery cut off can only be toggled between 10v and 10.5v from a set of d.i.p switches(assuming a 12v battery setup) . A more improved version now exists where you can adjust the battery cut off voltage from a knob beside the l.e.d display. Oga Kiekie posted a picture of it (some pages back).

Oshomo12:


My guy, Dam5reey has given u both practical and theoretical end of your batteries, why ask again?
@ 24v 200ah u re supposed to pull 10a savely from ur batteries, u re now talking of pulling around 84a! After such successful pull, d life of ur batteries will never remain the same. I may be wrong though, since this is a DIY, kindly do that experiment on ur batteries and report back to the house, who knows u can be right.

What would be your suggested setup for such load for 30 mins run time

Janyves:


This is in addition to Oga Niyi's ...... From the picture its a 4kva (3kw) 24v inverter. It's low battery cut off can only be toggled between 10v and 10.5v from a set of d.i.p switches(assuming a 12v battery setup) . A more improved version now exists where you can adjust the battery cut off voltage from a knob beside the l.e.d display. Oga Kiekie posted a picture of it (some pages back).

Thank you. I am getting him a Victron

mctfopt:



Go to Konga and search Ctorch LED T-bulb, you'd see the 6w. You can search for the 5w or buy the 6w bulb in a market near you. The last time I bought the 6w I paid N600 each. The 5w sells for N500. Ctorch is a very good brand.

Mosquito will not bite u
Their 5W is brighter than most other brands of 9W

rajo4real:


Mosquito will not bite u
Their 5W is brighter than most other brands of 9W

Oh it repeals mosquitoes as well? Unfortunately could not find CTorch in Ekiti, went for 5w AKT, I hope it lasts.

My next set of bulbs will be the rechargeable ones. Figured there won't be need to have my inverter on through the night if I can get few bulbs that last for 5 hours without power supply. Any idea of such bulbs?

Good Day Solar Gurus. I want to add to my existing modules but the problem is that, it will increase the output current which will be more than the 60A CC. I don't want to discard the old CC. Please what is your Advice?

rajo4real:


Mosquito will not bite u
Their 5W is brighter than most other brands of 9W

LOL. Well, the bulbs are sure super bright.

bringing all solar wires to combiner box

installing SCC

Battery

I will like to power my 60watt TV, gotv and two energy bulbs.

For 5hrs.
Please recommend an inverter that is affordable and reliable.

[quote author=Alejob post=73816998]


You are right sir, thanks for the info bro[/quote



I will like to power my 60watt TV, gotv and two energy bulbs.

For 5hrs.
Please recommend an inverter that is affordable and reliable.

Alejob:



You will need at least 4 units of 200ah batteries to enjoy this kind of load. Don't forget not to abuse the depth of discharge......if you deplete the battery too low every night, you battery won't last very long except guy are hooked to lithium battery!

I will like to power my 60watt TV, gotv and two energy bulbs.

For 5hrs.
Please recommend an inverter that is affordable and reliable.

battery

at 9:40 in the morning