Boadu: Helloooo Gurus, I heard some fellas in Ghana have been able to track Irib packages using a 90cm dish with a C-Band LNB. Please, can some Gurus also confirm this? Response will be much appreciated!

ya it works in 9ja on 90cm but not showing the 2 station showing ball

Boadu: Helloooo Gurus, I heard some fellas in Ghana have been able to track Irib packages using a 90cm dish with a C-Band LNB. Please, can some Gurus also confirm this? Response will be much appreciated!

sure but 1m dish will give you what you what you want....

pls i want sum1 2 shed more light on rdv @amos17 degree east,is it mpeg4 or mpeg2 compliance

@Bisi12004 & emmysheg: maximum appreciation for your explanation. I'm very grateful for responses.

bisi12004: sure but 1m dish will give you what you what you want....

Pls would 1metre nail this bird irib in lagos pls

Stevolat: rdv is actually on w3c @16 deg East. Though,w3c @16E & Amos5 @17 deg East are tracked together using one 90cm dish. Mpeg4 is the order of the day! So get Mpeg4 and enjoy rdv, oromia and many more!

@brainy02: yes even 90cm can track the arabat5c @ 20E beam. But depending on the geography of your area, you may get other channels excluding Irib package

any hope 4 2day match chelsea vasus ttotenham pls

@=Stevolat].if u hav empeg2 go ahead.oromia,rdv,etc.with dis tp.12560h30000.12217v27500.

Please ma gud members, which LNBf is best for tracking FTA football TV channels. hoping to benefit from a gud fella.

Boadu: @brainy02: yes even 90cm can track the arabat5c @ 20E beam. But depending on the geography of your area, you may get other channels excluding Irib package

Thanks man but with 1metre one should pull the IRIB package? Pls#

@brainy02: ooh yeah! 1m is very good to track Irib @ every conner in Africa. Use(3964v30000). @ stevolat: you can Track w3c 16 deg East with 10803H30000 and get a maximum signal 88% and above. Or Track Amos5 @17East with 12217v27500. Then after hitting green, change your polarization to hor&vert or H&V and blinscan. You will get all 16 E& Amos5(17E) channels. The two satelites are very close so it easy to use one Dish to nail the two birds!

emmysheg: ya it works in 9ja on 90cm but not showing the 2 station showing ball

pliz attach image/pictures of the setup

GH-ONE:
@brainy02: ooh yeah! 1m is very good to track Irib @ every conner in Africa. Use(3964v30000). @ stevolat: you can Track w3c 16 deg East with 10803H30000 and get a maximum signal 88% and above. Or Track Amos5 @17East with 12217v27500. Then after hitting green, change your polarization to hor&vert or H&V and blinscan. You will get all 16 E& Amos5(17E) channels. The two satelites are very close so it easy to use one Dish to nail the two birds!

Encouraging,
But why am I finding it difficult to hit green on that irib freq with a motorised 1.6m dish in Abj. Ngr. I've got more than 17 channels on arabsat @ 20'e, no irib yet. What am I not doing right?

Kingjames:

Encouraging,
But why am I finding it difficult to hit green on that irib freq with a motorised 1.6m dish in Abj. Ngr. I've got more than 17 channels on arabsat @ 20'e, no irib yet. What am I not doing right?

Maybe u are using an mpeg2 receiver.

Kingjames:

Encouraging,
But why am I finding it difficult to hit green on that irib freq with a motorised 1.6m dish in Abj. Ngr. I've got more than 17 channels on arabsat @ 20'e, no irib yet. What am I not doing right?

u need to insert the teflon plate & use mpeg4 rx

Helloooo Kyleege, plz what is that Teflon Plate? We all want to track this Irib package. Is the the Teflon plate a seperate device apart from dish? Somebody answer meeeeee!

Boadu: Helloooo Kyleege, plz what is that Teflon Plate? We all want to track this Irib package. Is the the Teflon plate a seperate device apart from dish? Somebody answer meeeeee!

Very good question, answer pls

I thought dis page is meant for fta live matches. Maybe we shud jst be in order.

Boadu: Stevolat: rdv is actually on w3c @16 deg East. Though,w3c @16E & Amos5 @17 deg East are tracked together using one 90cm dish. Mpeg4 is the order of the day! So get Mpeg4 and enjoy rdv, oromia and many more!

i know rdv is on w3c,is it still mpeg2 or mpeg4 tv station

brainy02:

Very good question, answer pls

pls attach pics 4 us 2 see

GH-ONE:
@brainy02: ooh yeah! 1m is very good to track Irib @ every conner in Africa. Use(3964v30000). @ stevolat: you can Track w3c 16 deg East with 10803H30000 and get a maximum signal 88% and above. Or Track Amos5 @17East with 12217v27500. Then after hitting green, change your polarization to hor&vert or H&V and blinscan. You will get all 16 E& Amos5(17E) channels. The two satelites are very close so it easy to use one Dish to nail the two birds!

can u pls attach de pic for lrib package 4 us to see.

jezsie:

pls what freq is working to track the two together @all

u can use 10801h30000 or 11024h3333

chelsea vs tottenham live now on irib tv3

kyleege: u need to insert the teflon plate & use mpeg4 rx

I use mpeg4 rx, but what is a teflon plate and where am I to insert it?

@ ALL THOSE CRYING FOR Irib CHANNELS: With 90cm dish & above, buy C-Band LNB. The dealer will add a plate to the LNB. This plate is called di-electric plate. 'Teflon' is nothing but the material which is used to manufacture this yellow coloured-rectangular plate called( di-electric plate). The function of this plate is that, whenever a C-Band TP has R/L, like Irib 3964R30000, you have to open the throat of your LNB & slot in the di-electric plate b4 you can track that channel. If it is a C-Band TP but with H/V, like 3155V27499, you have to remove the plate from the LNB b4 you can track that channel. Bear in mind that, Irib channels frequency originally is 3964R30000. But to change the R to V, on your decoder just go to the polarization and make it V. Now let's track Irib 1. Put the di-electric plate in the LNB 2. Input freq:3964 sym rate:30000 pol:V 3. Raise the dish little above multi-tv position and do the magic!!!

GH-ONE:
@ ALL THOSE CRYING FOR Irib CHANNELS: With 90cm dish & above, buy C-Band LNB. The dealer will add a plate to the LNB. This plate is called di-electric plate. 'Teflon' is nothing but the material which is used to manufacture this yellow coloured-rectangular plate called( di-electric plate). The function of this plate is that, whenever a C-Band TP has R/L, like Irib 3964R30000, you have to open the throat of your LNB & slot in the di-electric plate b4 you can track that channel. If it is a C-Band TP but with H/V, like 3155V27499, you have to remove the plate from the LNB b4 you can track that channel. Bear in mind that, Irib channels frequency originally is 3964R30000. But to change the R to V, on your decoder just go to the polarization and make it V. Now let's track Irib 1. Put the di-electric plate in the LNB 2. Input freq:3964 sym rate:30000 pol:V 3. Raise the dish little above multi-tv position and do the magic!!!

Guy you have to add class to your post. I read the post in its entirety and found it reasonable and useful, but the highlighted text is somehow harsh

GH-ONE:
@ ALL THOSE CRYING FOR Irib CHANNELS: With 90cm dish & above, buy C-Band LNB. The dealer will add a plate to the LNB. This plate is called di-electric plate. 'Teflon' is nothing but the material which is used to manufacture this yellow coloured-rectangular plate called( di-electric plate). The function of this plate is that, whenever a C-Band TP has R/L, like Irib 3964R30000, you have to open the throat of your LNB & slot in the di-electric plate b4 you can track that channel. If it is a C-Band TP but with H/V, like 3155V27499, you have to remove the plate from the LNB b4 you can track that channel. Bear in mind that, Irib channels frequency originally is 3964R30000. But to change the R to V, on your decoder just go to the polarization and make it V. Now let's track Irib 1. Put the di-electric plate in the LNB 2. Input freq:3964 sym rate:30000 pol:V 3. Raise the dish little above multi-tv position and do the magic!!!

good one

Thanks
but how do u modify 90cm dish from ku to c band dish
pics of same will appreciated

GH-ONE:
@ ALL THOSE CRYING FOR Irib CHANNELS: With 90cm dish & above, buy C-Band LNB. The dealer will add a plate to the LNB. This plate is called di-electric plate. 'Teflon' is nothing but the material which is used to manufacture this yellow coloured-rectangular plate called( di-electric plate). The function of this plate is that, whenever a C-Band TP has R/L, like Irib 3964R30000, you have to open the throat of your LNB & slot in the di-electric plate b4 you can track that channel.

I checked out the cband lnb and saw this.(pic)
cld this be close to what u are talking abt?

GH-ONE:
@ ALL THOSE CRYING FOR Irib CHANNELS: With 90cm dish & above, buy C-Band LNB. The dealer will add a plate to the LNB. This plate is called di-electric plate. 'Teflon' is nothing but the material which is used to manufacture this yellow coloured-rectangular plate called( di-electric plate). The function of this plate is that, whenever a C-Band TP has R/L, like Irib 3964R30000, you have to open the throat of your LNB & slot in the di-electric plate b4 you can track that channel. If it is a C-Band TP but with H/V, like 3155V27499, you have to remove the plate from the LNB b4 you can track that channel. Bear in mind that, Irib channels frequency originally is 3964R30000. But to change the R to V, on your decoder just go to the polarization and make it V. Now let's track Irib 1. Put the di-electric plate in the LNB 2. Input freq:3964 sym rate:30000 pol:V 3. Raise the dish little above multi-tv position and do the magic!!!

GH ONE u re too much, more grease 2 elbow, may ur enemies be deceased.Unlike some wicked lTK dat won't respond but abuse dose dat re novice.