I bought a Nissan sunny 2010 model just before the lock down, the car as a very low mileage and runs pretty smooth, but the issue I have with the car is that when the car runs for a while and engine gets to optimal temperature once you turn off the engine and try to start it, it won’t start until the temperature gets back to zero on the temperature gauge.

It’s been a challenge trying to diagnose the fault and fixing it.

I share a vlog story on trying to get it fixed.

Car cranks but won’t start
I’m trying to fix it, join the vlog you may learn one or two from my experience

Remember to subscribe from more and leave a comment
Thanks

CAR CRANCK WON’T START | FIXING IT VLOG SERIES

https://www.youtube.com/watch?v=goKpzYh1WMg

Just change both crankshaft sensors

TPound:
Just change both crankshaft sensors

Thank you for this comment, I have been thinking of this

Have u fixed the problem?

This happened to me. I don't know if it is same as yours. it happened to me. In my case, my battery terminals were always hot after a fast drive around. A smart electrician changed the positive terminal (head) of my battery cable.

Now my car cranks and responds anytime. Like I said, yours maybe different.

TransZite:
Have u fixed the problem?

Not yet, they took the brain box to reset now it won’t even start. I just left the car for now using my other car.

Mine had an issue yesterday. It was a loose wire not connecting properly to the crankshaft sensor.kindly check the crankshaft sensor for loose wires.mine was fixed instantly.call 0803 486 8324 he is a Nissan specialist.note the crankshaft sensor is the sensor around the flywheel.

TransZite:

Mine had an issue yesterday. It was a loose wire not connecting properly to the crankshaft sensor.kindly check the crankshaft sensor for loose wires.mine was fixed instantly.call 0803 486 8324 he is a Nissan specialist.note the crankshaft sensor is the sensor around the flywheel.

Thanks for this

TransZite:

Mine had an issue yesterday. It was a loose wire not connecting properly to the crankshaft sensor.kindly check the crankshaft sensor for loose wires.mine was fixed instantly.call 0803 486 8324 he is a Nissan specialist.note the crankshaft sensor is the sensor around the flywheel.

Scanned and it was the cramshaft positioning sensor. The socket was loose, fixed and crusing the car

i got a Nissan Sunny 2010. it was moving very well I have travelled with it without issue before but the lights were not bright, I gave it to rewire to correct it but after the correction, the car will not move very well again plus the sound its bringing shows that the car is not okay, please help me.

I think that the Nissan Sunny 2022, is one of the best versions of Nissan ever

Luxurydriverng:

Not yet, they took the brain box to reset now it won’t even start. I just left the car for now using my other car.