₦airaland Forum

Interesting, but how will they know if the spouse is on DAAD Scholarship as the online appointment system for family Reunion does not indicate your reference person/contact as seen from this general family Reunion page which also shows waiting period of above 1 year:
https://service2.diplo.de/rktermin/extern/choose_category.do?locationCode=lago&realmId=347&categoryId=1675

Or is there any other link to apply for Family Reunion for "Students on Category A" such as DAAD??

pseudonomer:
I know, I’m asking because my friends on DAAD scholarship has a fast track preference in bring their spouse, usually about 3 months.

Oh, Yes, Covid test is Mandatory and it be valid for 72hours between when your sample is taken and time of arrival at your final destination.

esther49:
Those that have been fully vaccinated, do they still need to do a Covid test before entering Germany?

Thank you for your reply, Do you have any idea of the estimated salary(I, my wife & 2 kids) the embassy could be looking at, and if its not sufficient can savings be used as substitute as proof of sustenance?

Bonn2007:
If you are already in Germany and have a decent salary that can cater for your family they are already eligible for a reunion visa.
The whole process is quite lengthy from Nigeria, so bring inn lots of Patience and prayer in the journey. Good luck.

Good Evening All,

I resumed 1st Sept 2021 as a Phd Researcher, sponsored like the DAAD with monthly pay and I have 2 kids, the eldest is 5yrs. Please when can my wife apply for Family Re-union and what are possible criteria to be met before applying for reunion? I have an apartment her in *** and have gotten my contract letter.

Secondly, how long in estimate does it take to get an appointment and is there any thing additionally that could be done to make the process easier like blocked account etc and how can I go about it?

I appreciate your response

instrument engineer(EH), what is your date and time?

australiandream:
Almost all guys in my flight to Abuja were carrying suit.
Any instrument engineer(EH) in the house?

Atopet Automations Limited
#44 Road 8, Pipeline Rumukwrushi, Port Harcourt

Trainee Job in Port Harcourt

Follow this link
http://c24jobs.com/ref/559FA/NG

Graduate Trainee (Embedded systems and Robotics) Atopet Automations Limited

Duties and Responsibilities:

The main job of a trainee engineer is work as per the guidelines and instructions of his manager and deliver to the best of his abilities.
He will be responsible to perform and carry out any project undertaken by the senior management of the company.
He might have to assist his seniors in developing a new project.
He should have the ability to improvise on existing engineering techniques in force in the company in order to make them more feasible and cost effective.
He might be given some basic guidelines and expected to showcase his engineering skills on them.
His main responsibility is to cultivate and learn professional behavior and mannerisms from this traineeship.
He might have to conduct sampling activities and take decisions on them along with the consent of his manager.
He might be required to work out an exhaustive budget and devise new methods for achieving the company’s goal.
He may need to gather information relating to latest engineering techniques and pass them to the technical team for incorporation

Relevant degree or qualification in technical fields and Engineering, with I.T compliance.
Skills and Specifications:

A Trainee engineer must be adept in technology advancements and other engineering aspects
Must be able to work in a team
Must be proficient in mathematics and analytical subjects.
Must have the ability to understand complex scenarios and decode them with ease
Must have great interpersonal skills.
Must be a quick observer and ready to learn new things.
Problem solving skills
Up-to-date knowledge of technologies
Good organisational and time management skills
For programming, knowledge of one or more programming languages relevant to the role
Some may require experience with database management systems
An ability to work to deadlines
A good eye for detail
Required Skills
computer programming : 1 year or less
engineering : 1 year or less
electrical electronics : 1 year or less

Source: http://www.careers24.com.ng/jobs/adverts/136295-graduate-trainee-embedded-systems-and-robotics-rivers/?jobindex=1

Visit: http://atopetautomations.com/index.php/join-us

Here is a review of EMBEDDED SYSTEMS & ROBOTICS COURSE with Atopet Automations Limited.

FEATURING
o Microcontrollers
• ARM, Cortex M3 microcontrollers
• Arduino UNO/Nano microcontrollers
• Microchip PIC Microcontrollers
• Raspberry Pi


o Software
• Embedded C/C++ C/C++ Compiler e.g Kiel-C UVision5, Embedded Python
• ARM online compiler/Arduino Software IDE/ Microchip MpLAB IDE
• Proteus Professional, Multism, Utiliboard
• Tera Term, Cool term, serial monitor, etc.

BASIC AND INTERMEDIATE Courses
1. Introduction
The Embedded System, its characteristics and examples. Review of the
microprocessor and introduction to microcontroller. Microcontroller
architectures, memory map, instruction set.

2. Microcontrollers Core, Memory, and Architectures
Microcontroller Architectures, e.g. ARM Cortex-M3, Memory Technologies:
review of technologies applicable in embedded environment.

3. Sensors Interfacing I: Digital and Analogue Input/Output
Review of digital I/O, InfraRed PIR Motion Sensor, techniques of analogue
I/O, Data Acquisition – resolution and accuracy, ADCs, PWM sources and
applications. Interfacing to power devices, dc and stepper motors, dc
sources, servos etc, Piezo Buzzer, TruOpto Light Dependent Resistor (LDR),
LM335AZ - Temperature Sensor, LCD Display, Ultrasonic Module HC-SR04
Distance Sensor and One Wire Digital Temperature Sensor - DS18B20

4. Data Communications
Serial Ports, Review of simple serial protocols, e.g. SPI, I2C bus.
Overview of advanced and high reliability data links, eg CAN bus.

5. Dealing with Time
Interrupts and their structures, latency, priorities, overview of complex
counter/timer structures and their applications

6. Software Development
Survey of embedded C, C++, Software Design. Structured software design.
Challenges of applying C to embedded environment. Typical C compilers.
Safety conscious C. Overview of multitasking. The Real Time Operating
System (RTOS): tasks, priorities, scheduling.


ADVANCED Course
1. Power Supply, Processing and Management
Supply management. Brown-out and reset issues. Design for Low Power: power
supply and management in a power conscious environment. Features of a low
power microcontroller and their application, optimization through use of
Sleep and Idle modes, and clock switching, Low power circuit design.

2. Internet of Things (IoT)
How the Next Evolution of the Internet Is Changing Everything, IoT as a
Network of Networks, Online and Offline Embedded systems, WIFI, People and
Things Connecting to Internet, Wireless Sensor Networks (WSN) etc

3. Advance Communication
Advanced and high reliability data links, e.g. CAN bus, LIN bus. Physical
limitations on data links e.g. Ethernet, USB etc. Internet-linked embedded
systems.

4. Cut-edge Technology in embedded Systems
Advanced Languages Survey - Java Application on embedded Systems,
Multitasking and its relative merits in embedded environment. The Real
Time Operating System (RTOS) etc

SPECIALISED Course
5. Sensors Interfacing II: Digital and Analogue Input/Output
i. Humidity, Dew point and Temperature Sensor (DHT22)
ii. Ultrasonic Range Finder Srf05 & Srf08
iii. Ultrasonic Transmitter/Receiver
iv. Infrared Receiver Module
v. HC-05 Wireless Bluetooth RF Transceiver Module serial.

6. Specialty
i. ARM Controller + Bluetooth: SM-RN RN42 module data serial transfer (M2M)
ii. ARM Controller + LinkSprite JPEG Infrared Color Camera TTL Interface:
Capture high pixel images and save into flash memory
iii. Network ARM Controllers using I2C protocol
iv. Networked ARM Controllers using CAN protocol
v. ARM Controller + EasyVR Shield 2.0: Voice Recognition Shield, voice
programmed into controllers and use for automation.
vi. ARM Controller + RN-XV WiFly: IoT (WIFI data transfer)
vii. ARM Controller + Ethernet: IoT
viii. PIC 18f + Bluetooth: Windows App – interfaces with PC (Laptop) GUI
to control and monitor devices. PIC RF Solutions with Bluetooth Module
TOOTHPIC-V2
ix. Arduino + 1Sheeld – Mobile Automation - integrated plugin on Android
smartphone for control of devices with your phone and Arduino; features
LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM,
Wi-Fi, GPS… etc

refresh and repost, dont think phone is required

ATOPET AUTOMATIONS LIMITED introduces Embedded Systems and Robotics Training.

Here is a review of our EMBEDDED SYSTEMS & ROBOTICS COURSE with Atopet Automations Limited.

FEATURING
o Microcontrollers
• ARM, Cortex M3 microcontrollers
• Arduino UNO/Nano microcontrollers
• Microchip PIC Microcontrollers

o Software
• Embedded C/C++ C/C++ Compiler e.g Kiel-C, Kiel UVision5
• ARM online compiler/Arduino Software IDE/ Microchip MpLAB IDE
• Proteus Professional, Multism, Utiliboard
• Tera Term, Cool term, serial monitor, etc.

BASIC AND INTERMEDIATE Courses
1. Introduction
The Embedded System, its characteristics and examples. Review of the
microprocessor and introduction to microcontroller. Microcontroller
architectures, memory map, instruction set.

2. Microcontrollers Core, Memory, and Architectures
Microcontroller Architectures, e.g. ARM Cortex-M3, Memory Technologies:
review of technologies applicable in embedded environment.

3. Sensors Interfacing I: Digital and Analogue Input/Output
Review of digital I/O, InfraRed PIR Motion Sensor, techniques of analogue
I/O, Data Acquisition – resolution and accuracy, ADCs, PWM sources and
applications. Interfacing to power devices, dc and stepper motors, dc
sources, servos etc, Piezo Buzzer, TruOpto Light Dependent Resistor (LDR),
LM335AZ - Temperature Sensor, LCD Display, Ultrasonic Module HC-SR04
Distance Sensor and One Wire Digital Temperature Sensor - DS18B20

4. Data Communications
Serial Ports, Review of simple serial protocols, e.g. SPI, I2C bus.
Overview of advanced and high reliability data links, eg CAN bus.

5. Dealing with Time
Interrupts and their structures, latency, priorities, overview of complex
counter/timer structures and their applications

6. Software Development
Survey of embedded C, C++, Software Design. Structured software design.
Challenges of applying C to embedded environment. Typical C compilers.
Safety conscious C. Overview of multitasking. The Real Time Operating
System (RTOS): tasks, priorities, scheduling.


ADVANCED Course
1. Power Supply, Processing and Management
Supply management. Brown-out and reset issues. Design for Low Power: power
supply and management in a power conscious environment. Features of a low
power microcontroller and their application, optimization through use of
Sleep and Idle modes, and clock switching, Low power circuit design.

2. Internet of Things (IoT)
How the Next Evolution of the Internet Is Changing Everything, IoT as a
Network of Networks, Online and Offline Embedded systems, WIFI, People and
Things Connecting to Internet, Wireless Sensor Networks (WSN) etc

3. Advance Communication
Advanced and high reliability data links, e.g. CAN bus, LIN bus. Physical
limitations on data links e.g. Ethernet, USB etc. Internet-linked embedded
systems.

4. Cut-edge Technology in embedded Systems
Advanced Languages Survey - Java Application on embedded Systems,
Multitasking and its relative merits in embedded environment. The Real
Time Operating System (RTOS) etc

SPECIALISED Course
5. Sensors Interfacing II: Digital and Analogue Input/Output
i. Humidity, Dew point and Temperature Sensor (DHT22)
ii. Ultrasonic Range Finder Srf05 & Srf08
iii. Ultrasonic Transmitter/Receiver
iv. Infrared Receiver Module
v. HC-05 Wireless Bluetooth RF Transceiver Module serial.

6. Specialty
i. ARM Controller + Bluetooth: SM-RN RN42 module data serial transfer (M2M)
ii. ARM Controller + LinkSprite JPEG Infrared Color Camera TTL Interface:
Capture high pixel images and save into flash memory
iii. Network ARM Controllers using I2C protocol
iv. Networked ARM Controllers using CAN protocol
v. ARM Controller + EasyVR Shield 2.0: Voice Recognition Shield, voice
programmed into controllers and use for automation.
vi. ARM Controller + RN-XV WiFly: IoT (WIFI data transfer)
vii. ARM Controller + Ethernet: IoT
viii. PIC 18f + Bluetooth: Windows App – interfaces with PC (Laptop) GUI
to control and monitor devices. PIC RF Solutions with Bluetooth Module
TOOTHPIC-V2
ix. Arduino + 1Sheeld – Mobile Automation - integrated plugin on Android
smartphone for control of devices with your phone and Arduino; features
LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM,
Wi-Fi, GPS… etc

You can source your electronics components from Atopet Automation Ltd. We also have an online shopping platform at: http://atopetautomations.com/shop
You can buy your electronics embedded components, microcontrollers and Development Boards both online and offline.

Kindly fill our registration form on:
http://atopetautomations.com/index.php/training/register

Please contact us on: http://atopetautomations.com/index.php/contact

Our Head Office ADDRESS:
ATOPET AUTOMATIONS LIMITED
SUITE C1, LACFOG PLAZA,
BESIDE CHOBA POLICE STATION,
EAST WEST ROAD, CHOBA,
PORT HARCOURT

EMAIL: admin@atopetautomations.com
CONTACT NUMBER: +(234) 09094009029

For more info visit: www.atopetautomations.com

ATOPET AUTOMATIONS LIMITED introduces Embedded Systems and Robotics Training.

Here is a review of our EMBEDDED SYSTEMS & ROBOTICS COURSE with Atopet Automations Limited.

FEATURING
o Microcontrollers
• ARM, Cortex M3 microcontrollers
• Arduino UNO/Nano microcontrollers
• Microchip PIC Microcontrollers

o Software
• Embedded C/C++ C/C++ Compiler e.g Kiel-C, Kiel UVision5
• ARM online compiler/Arduino Software IDE/ Microchip MpLAB IDE
• Proteus Professional, Multism, Utiliboard
• Tera Term, Cool term, serial monitor, etc.

BASIC AND INTERMEDIATE Courses
1. Introduction
The Embedded System, its characteristics and examples. Review of the
microprocessor and introduction to microcontroller. Microcontroller
architectures, memory map, instruction set.

2. Microcontrollers Core, Memory, and Architectures
Microcontroller Architectures, e.g. ARM Cortex-M3, Memory Technologies:
review of technologies applicable in embedded environment.

3. Sensors Interfacing I: Digital and Analogue Input/Output
Review of digital I/O, InfraRed PIR Motion Sensor, techniques of analogue
I/O, Data Acquisition – resolution and accuracy, ADCs, PWM sources and
applications. Interfacing to power devices, dc and stepper motors, dc
sources, servos etc, Piezo Buzzer, TruOpto Light Dependent Resistor (LDR),
LM335AZ - Temperature Sensor, LCD Display, Ultrasonic Module HC-SR04
Distance Sensor and One Wire Digital Temperature Sensor - DS18B20

4. Data Communications
Serial Ports, Review of simple serial protocols, e.g. SPI, I2C bus.
Overview of advanced and high reliability data links, eg CAN bus.

5. Dealing with Time
Interrupts and their structures, latency, priorities, overview of complex
counter/timer structures and their applications

6. Software Development
Survey of embedded C, C++, Software Design. Structured software design.
Challenges of applying C to embedded environment. Typical C compilers.
Safety conscious C. Overview of multitasking. The Real Time Operating
System (RTOS): tasks, priorities, scheduling.


ADVANCED Course
1. Power Supply, Processing and Management
Supply management. Brown-out and reset issues. Design for Low Power: power
supply and management in a power conscious environment. Features of a low
power microcontroller and their application, optimization through use of
Sleep and Idle modes, and clock switching, Low power circuit design.

2. Internet of Things (IoT)
How the Next Evolution of the Internet Is Changing Everything, IoT as a
Network of Networks, Online and Offline Embedded systems, WIFI, People and
Things Connecting to Internet, Wireless Sensor Networks (WSN) etc

3. Advance Communication
Advanced and high reliability data links, e.g. CAN bus, LIN bus. Physical
limitations on data links e.g. Ethernet, USB etc. Internet-linked embedded
systems.

4. Cut-edge Technology in embedded Systems
Advanced Languages Survey - Java Application on embedded Systems,
Multitasking and its relative merits in embedded environment. The Real
Time Operating System (RTOS) etc

SPECIALISED Course
5. Sensors Interfacing II: Digital and Analogue Input/Output
i. Humidity, Dew point and Temperature Sensor (DHT22)
ii. Ultrasonic Range Finder Srf05 & Srf08
iii. Ultrasonic Transmitter/Receiver
iv. Infrared Receiver Module
v. HC-05 Wireless Bluetooth RF Transceiver Module serial.

6. Specialty
i. ARM Controller + Bluetooth: SM-RN RN42 module data serial transfer (M2M)
ii. ARM Controller + LinkSprite JPEG Infrared Color Camera TTL Interface:
Capture high pixel images and save into flash memory
iii. Network ARM Controllers using I2C protocol
iv. Networked ARM Controllers using CAN protocol
v. ARM Controller + EasyVR Shield 2.0: Voice Recognition Shield, voice
programmed into controllers and use for automation.
vi. ARM Controller + RN-XV WiFly: IoT (WIFI data transfer)
vii. ARM Controller + Ethernet: IoT
viii. PIC 18f + Bluetooth: Windows App – interfaces with PC (Laptop) GUI
to control and monitor devices. PIC RF Solutions with Bluetooth Module
TOOTHPIC-V2
ix. Arduino + 1Sheeld – Mobile Automation - integrated plugin on Android
smartphone for control of devices with your phone and Arduino; features
LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM,
Wi-Fi, GPS… etc

You can source your electronics components from Atopet Automation Ltd. We also have an online shopping platform at: http://atopetautomations.com/shop
You can buy your electronics embedded components, microcontrollers and Development Boards both online and offline.

Kindly fill our registration form on:
http://atopetautomations.com/index.php/training/register

Please contact us on: http://atopetautomations.com/index.php/contact

Our Head Office ADDRESS:
ATOPET AUTOMATIONS LIMITED
SUITE C1, LACFOG PLAZA,
BESIDE CHOBA POLICE STATION,
EAST WEST ROAD, CHOBA,
PORT HARCOURT

EMAIL: admin@atopetautomations.com
CONTACT NUMBER: +(234) 09094009029

For more info visit: www.atopetautomations.com

ATOPET AUTOMATIONS LIMITED introduces Embedded Systems and Robotics Training.

Here is a review of our EMBEDDED SYSTEMS & ROBOTICS COURSE with Atopet Automations Limited.

FEATURING
o Microcontrollers
• ARM, Cortex M3 microcontrollers
• Arduino UNO/Nano microcontrollers
• Microchip PIC Microcontrollers

o Software
• Embedded C/C++ C/C++ Compiler e.g Kiel-C, Kiel UVision5
• ARM online compiler/Arduino Software IDE/ Microchip MpLAB IDE
• Proteus Professional, Multism, Utiliboard
• Tera Term, Cool term, serial monitor, etc.

BASIC AND INTERMEDIATE Courses
1. Introduction
The Embedded System, its characteristics and examples. Review of the
microprocessor and introduction to microcontroller. Microcontroller
architectures, memory map, instruction set.

2. Microcontrollers Core, Memory, and Architectures
Microcontroller Architectures, e.g. ARM Cortex-M3, Memory Technologies:
review of technologies applicable in embedded environment.

3. Sensors Interfacing I: Digital and Analogue Input/Output
Review of digital I/O, InfraRed PIR Motion Sensor, techniques of analogue
I/O, Data Acquisition – resolution and accuracy, ADCs, PWM sources and
applications. Interfacing to power devices, dc and stepper motors, dc
sources, servos etc, Piezo Buzzer, TruOpto Light Dependent Resistor (LDR),
LM335AZ - Temperature Sensor, LCD Display, Ultrasonic Module HC-SR04
Distance Sensor and One Wire Digital Temperature Sensor - DS18B20

4. Data Communications
Serial Ports, Review of simple serial protocols, e.g. SPI, I2C bus.
Overview of advanced and high reliability data links, eg CAN bus.

5. Dealing with Time
Interrupts and their structures, latency, priorities, overview of complex
counter/timer structures and their applications

6. Software Development
Survey of embedded C, C++, Software Design. Structured software design.
Challenges of applying C to embedded environment. Typical C compilers.
Safety conscious C. Overview of multitasking. The Real Time Operating
System (RTOS): tasks, priorities, scheduling.


ADVANCED Course
1. Power Supply, Processing and Management
Supply management. Brown-out and reset issues. Design for Low Power: power
supply and management in a power conscious environment. Features of a low
power microcontroller and their application, optimization through use of
Sleep and Idle modes, and clock switching, Low power circuit design.

2. Internet of Things (IoT)
How the Next Evolution of the Internet Is Changing Everything, IoT as a
Network of Networks, Online and Offline Embedded systems, WIFI, People and
Things Connecting to Internet, Wireless Sensor Networks (WSN) etc

3. Advance Communication
Advanced and high reliability data links, e.g. CAN bus, LIN bus. Physical
limitations on data links e.g. Ethernet, USB etc. Internet-linked embedded
systems.

4. Cut-edge Technology in embedded Systems
Advanced Languages Survey - Java Application on embedded Systems,
Multitasking and its relative merits in embedded environment. The Real
Time Operating System (RTOS) etc

SPECIALISED Course
5. Sensors Interfacing II: Digital and Analogue Input/Output
i. Humidity, Dew point and Temperature Sensor (DHT22)
ii. Ultrasonic Range Finder Srf05 & Srf08
iii. Ultrasonic Transmitter/Receiver
iv. Infrared Receiver Module
v. HC-05 Wireless Bluetooth RF Transceiver Module serial.

6. Specialty
i. ARM Controller + Bluetooth: SM-RN RN42 module data serial transfer (M2M)
ii. ARM Controller + LinkSprite JPEG Infrared Color Camera TTL Interface:
Capture high pixel images and save into flash memory
iii. Network ARM Controllers using I2C protocol
iv. Networked ARM Controllers using CAN protocol
v. ARM Controller + EasyVR Shield 2.0: Voice Recognition Shield, voice
programmed into controllers and use for automation.
vi. ARM Controller + RN-XV WiFly: IoT (WIFI data transfer)
vii. ARM Controller + Ethernet: IoT
viii. PIC 18f + Bluetooth: Windows App – interfaces with PC (Laptop) GUI
to control and monitor devices. PIC RF Solutions with Bluetooth Module
TOOTHPIC-V2
ix. Arduino + 1Sheeld – Mobile Automation - integrated plugin on Android
smartphone for control of devices with your phone and Arduino; features
LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM,
Wi-Fi, GPS… etc

You can source your electronics components from Atopet Automation Ltd. We also have an online shopping platform at: http://atopetautomations.com/shop
You can buy your electronics embedded components, microcontrollers and Development Boards both online and offline.

Kindly fill our registration form on:
http://atopetautomations.com/index.php/training/register

Please contact us on: http://atopetautomations.com/index.php/contact

Our Head Office ADDRESS:
ATOPET AUTOMATIONS LIMITED
SUITE C1, LACFOG PLAZA,
BESIDE CHOBA POLICE STATION,
EAST WEST ROAD, CHOBA,
PORT HARCOURT

EMAIL: admin@atopetautomations.com
CONTACT NUMBER: +(234) 09094009029

For more info visit: www.atopetautomations.com

ATOPET AUTOMATIONS LIMITED introduces Embedded Systems and Robotics Training.

Here is a review of our EMBEDDED SYSTEMS & ROBOTICS COURSE with Atopet Automations Limited.

FEATURING
o Microcontrollers
• ARM, Cortex M3 microcontrollers
• Arduino UNO/Nano microcontrollers
• Microchip PIC Microcontrollers

o Software
• Embedded C/C++ C/C++ Compiler e.g Kiel-C, Kiel UVision5
• ARM online compiler/Arduino Software IDE/ Microchip MpLAB IDE
• Proteus Professional, Multism, Utiliboard
• Tera Term, Cool term, serial monitor, etc.

BASIC AND INTERMEDIATE Courses
1. Introduction
The Embedded System, its characteristics and examples. Review of the
microprocessor and introduction to microcontroller. Microcontroller
architectures, memory map, instruction set.

2. Microcontrollers Core, Memory, and Architectures
Microcontroller Architectures, e.g. ARM Cortex-M3, Memory Technologies:
review of technologies applicable in embedded environment.

3. Sensors Interfacing I: Digital and Analogue Input/Output
Review of digital I/O, InfraRed PIR Motion Sensor, techniques of analogue
I/O, Data Acquisition – resolution and accuracy, ADCs, PWM sources and
applications. Interfacing to power devices, dc and stepper motors, dc
sources, servos etc, Piezo Buzzer, TruOpto Light Dependent Resistor (LDR),
LM335AZ - Temperature Sensor, LCD Display, Ultrasonic Module HC-SR04
Distance Sensor and One Wire Digital Temperature Sensor - DS18B20

4. Data Communications
Serial Ports, Review of simple serial protocols, e.g. SPI, I2C bus.
Overview of advanced and high reliability data links, eg CAN bus.

5. Dealing with Time
Interrupts and their structures, latency, priorities, overview of complex
counter/timer structures and their applications

6. Software Development
Survey of embedded C, C++, Software Design. Structured software design.
Challenges of applying C to embedded environment. Typical C compilers.
Safety conscious C. Overview of multitasking. The Real Time Operating
System (RTOS): tasks, priorities, scheduling.


ADVANCED Course
1. Power Supply, Processing and Management
Supply management. Brown-out and reset issues. Design for Low Power: power
supply and management in a power conscious environment. Features of a low
power microcontroller and their application, optimization through use of
Sleep and Idle modes, and clock switching, Low power circuit design.

2. Internet of Things (IoT)
How the Next Evolution of the Internet Is Changing Everything, IoT as a
Network of Networks, Online and Offline Embedded systems, WIFI, People and
Things Connecting to Internet, Wireless Sensor Networks (WSN) etc

3. Advance Communication
Advanced and high reliability data links, e.g. CAN bus, LIN bus. Physical
limitations on data links e.g. Ethernet, USB etc. Internet-linked embedded
systems.

4. Cut-edge Technology in embedded Systems
Advanced Languages Survey - Java Application on embedded Systems,
Multitasking and its relative merits in embedded environment. The Real
Time Operating System (RTOS) etc

SPECIALISED Course
5. Sensors Interfacing II: Digital and Analogue Input/Output
i. Humidity, Dew point and Temperature Sensor (DHT22)
ii. Ultrasonic Range Finder Srf05 & Srf08
iii. Ultrasonic Transmitter/Receiver
iv. Infrared Receiver Module
v. HC-05 Wireless Bluetooth RF Transceiver Module serial.

6. Specialty
i. ARM Controller + Bluetooth: SM-RN RN42 module data serial transfer (M2M)
ii. ARM Controller + LinkSprite JPEG Infrared Color Camera TTL Interface:
Capture high pixel images and save into flash memory
iii. Network ARM Controllers using I2C protocol
iv. Networked ARM Controllers using CAN protocol
v. ARM Controller + EasyVR Shield 2.0: Voice Recognition Shield, voice
programmed into controllers and use for automation.
vi. ARM Controller + RN-XV WiFly: IoT (WIFI data transfer)
vii. ARM Controller + Ethernet: IoT
viii. PIC 18f + Bluetooth: Windows App – interfaces with PC (Laptop) GUI
to control and monitor devices. PIC RF Solutions with Bluetooth Module
TOOTHPIC-V2
ix. Arduino + 1Sheeld – Mobile Automation - integrated plugin on Android
smartphone for control of devices with your phone and Arduino; features
LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM,
Wi-Fi, GPS… etc

You can source your electronics components from Atopet Automation Ltd. We also have an online shopping platform at: http://atopetautomations.com/shop
You can buy your electronics embedded components, microcontrollers and Development Boards both online and offline.

Kindly fill our registration form on:
http://atopetautomations.com/index.php/training/register

Please contact us on: http://atopetautomations.com/index.php/contact

Our Head Office ADDRESS:
ATOPET AUTOMATIONS LIMITED
SUITE C1, LACFOG PLAZA,
BESIDE CHOBA POLICE STATION,
EAST WEST ROAD, CHOBA,
PORT HARCOURT

EMAIL: admin@atopetautomations.com
CONTACT NUMBER: +(234) 09094009029

For more info visit: www.atopetautomations.com

ATOPET AUTOMATIONS LIMITED introduces Embedded Systems and Robotics Training.

Here is a review of our EMBEDDED SYSTEMS & ROBOTICS COURSE with Atopet Automations Limited.

FEATURING
o Microcontrollers
• ARM, Cortex M3 microcontrollers
• Arduino UNO/Nano microcontrollers
• Microchip PIC Microcontrollers

o Software
• Embedded C/C++ C/C++ Compiler e.g Kiel-C, Kiel UVision5
• ARM online compiler/Arduino Software IDE/ Microchip MpLAB IDE
• Proteus Professional, Multism, Utiliboard
• Tera Term, Cool term, serial monitor, etc.

BASIC AND INTERMEDIATE Courses
1. Introduction
The Embedded System, its characteristics and examples. Review of the
microprocessor and introduction to microcontroller. Microcontroller
architectures, memory map, instruction set.

2. Microcontrollers Core, Memory, and Architectures
Microcontroller Architectures, e.g. ARM Cortex-M3, Memory Technologies:
review of technologies applicable in embedded environment.

3. Sensors Interfacing I: Digital and Analogue Input/Output
Review of digital I/O, InfraRed PIR Motion Sensor, techniques of analogue
I/O, Data Acquisition – resolution and accuracy, ADCs, PWM sources and
applications. Interfacing to power devices, dc and stepper motors, dc
sources, servos etc, Piezo Buzzer, TruOpto Light Dependent Resistor (LDR),
LM335AZ - Temperature Sensor, LCD Display, Ultrasonic Module HC-SR04
Distance Sensor and One Wire Digital Temperature Sensor - DS18B20

4. Data Communications
Serial Ports, Review of simple serial protocols, e.g. SPI, I2C bus.
Overview of advanced and high reliability data links, eg CAN bus.

5. Dealing with Time
Interrupts and their structures, latency, priorities, overview of complex
counter/timer structures and their applications

6. Software Development
Survey of embedded C, C++, Software Design. Structured software design.
Challenges of applying C to embedded environment. Typical C compilers.
Safety conscious C. Overview of multitasking. The Real Time Operating
System (RTOS): tasks, priorities, scheduling.


ADVANCED Course
1. Power Supply, Processing and Management
Supply management. Brown-out and reset issues. Design for Low Power: power
supply and management in a power conscious environment. Features of a low
power microcontroller and their application, optimization through use of
Sleep and Idle modes, and clock switching, Low power circuit design.

2. Internet of Things (IoT)
How the Next Evolution of the Internet Is Changing Everything, IoT as a
Network of Networks, Online and Offline Embedded systems, WIFI, People and
Things Connecting to Internet, Wireless Sensor Networks (WSN) etc

3. Advance Communication
Advanced and high reliability data links, e.g. CAN bus, LIN bus. Physical
limitations on data links e.g. Ethernet, USB etc. Internet-linked embedded
systems.

4. Cut-edge Technology in embedded Systems
Advanced Languages Survey - Java Application on embedded Systems,
Multitasking and its relative merits in embedded environment. The Real
Time Operating System (RTOS) etc

SPECIALISED Course
5. Sensors Interfacing II: Digital and Analogue Input/Output
i. Humidity, Dew point and Temperature Sensor (DHT22)
ii. Ultrasonic Range Finder Srf05 & Srf08
iii. Ultrasonic Transmitter/Receiver
iv. Infrared Receiver Module
v. HC-05 Wireless Bluetooth RF Transceiver Module serial.

6. Specialty
i. ARM Controller + Bluetooth: SM-RN RN42 module data serial transfer (M2M)
ii. ARM Controller + LinkSprite JPEG Infrared Color Camera TTL Interface:
Capture high pixel images and save into flash memory
iii. Network ARM Controllers using I2C protocol
iv. Networked ARM Controllers using CAN protocol
v. ARM Controller + EasyVR Shield 2.0: Voice Recognition Shield, voice
programmed into controllers and use for automation.
vi. ARM Controller + RN-XV WiFly: IoT (WIFI data transfer)
vii. ARM Controller + Ethernet: IoT
viii. PIC 18f + Bluetooth: Windows App – interfaces with PC (Laptop) GUI
to control and monitor devices. PIC RF Solutions with Bluetooth Module
TOOTHPIC-V2
ix. Arduino + 1Sheeld – Mobile Automation - integrated plugin on Android
smartphone for control of devices with your phone and Arduino; features
LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM,
Wi-Fi, GPS… etc

You can source your electronics components from Atopet Automation Ltd. We also have an online shopping platform at: http://atopetautomations.com/shop
You can buy your electronics embedded components, microcontrollers and Development Boards both online and offline.

Kindly fill our registration form on:
http://atopetautomations.com/index.php/training/register

Please contact us on: http://atopetautomations.com/index.php/contact

Our Head Office ADDRESS:
ATOPET AUTOMATIONS LIMITED
SUITE C1, LACFOG PLAZA,
BESIDE CHOBA POLICE STATION,
EAST WEST ROAD, CHOBA,
PORT HARCOURT

EMAIL: admin@atopetautomations.com
CONTACT NUMBER: +(234) 09094009029

For more info visit: www.atopetautomations.com

ATOPET AUTOMATIONS LIMITED introduces Embedded Systems and Robotics Training.

Here is a review of our EMBEDDED SYSTEMS & ROBOTICS COURSE with Atopet Automations Limited.

FEATURING
o Microcontrollers
• ARM, Cortex M3 microcontrollers
• Arduino UNO/Nano microcontrollers
• Microchip PIC Microcontrollers

o Software
• Embedded C/C++ C/C++ Compiler e.g Kiel-C, Kiel UVision5
• ARM online compiler/Arduino Software IDE/ Microchip MpLAB IDE
• Proteus Professional, Multism, Utiliboard
• Tera Term, Cool term, serial monitor, etc.

BASIC AND INTERMEDIATE Courses
1. Introduction
The Embedded System, its characteristics and examples. Review of the
microprocessor and introduction to microcontroller. Microcontroller
architectures, memory map, instruction set.

2. Microcontrollers Core, Memory, and Architectures
Microcontroller Architectures, e.g. ARM Cortex-M3, Memory Technologies:
review of technologies applicable in embedded environment.

3. Sensors Interfacing I: Digital and Analogue Input/Output
Review of digital I/O, InfraRed PIR Motion Sensor, techniques of analogue
I/O, Data Acquisition – resolution and accuracy, ADCs, PWM sources and
applications. Interfacing to power devices, dc and stepper motors, dc
sources, servos etc, Piezo Buzzer, TruOpto Light Dependent Resistor (LDR),
LM335AZ - Temperature Sensor, LCD Display, Ultrasonic Module HC-SR04
Distance Sensor and One Wire Digital Temperature Sensor - DS18B20

4. Data Communications
Serial Ports, Review of simple serial protocols, e.g. SPI, I2C bus.
Overview of advanced and high reliability data links, eg CAN bus.

5. Dealing with Time
Interrupts and their structures, latency, priorities, overview of complex
counter/timer structures and their applications

6. Software Development
Survey of embedded C, C++, Software Design. Structured software design.
Challenges of applying C to embedded environment. Typical C compilers.
Safety conscious C. Overview of multitasking. The Real Time Operating
System (RTOS): tasks, priorities, scheduling.


ADVANCED Course
1. Power Supply, Processing and Management
Supply management. Brown-out and reset issues. Design for Low Power: power
supply and management in a power conscious environment. Features of a low
power microcontroller and their application, optimization through use of
Sleep and Idle modes, and clock switching, Low power circuit design.

2. Internet of Things (IoT)
How the Next Evolution of the Internet Is Changing Everything, IoT as a
Network of Networks, Online and Offline Embedded systems, WIFI, People and
Things Connecting to Internet, Wireless Sensor Networks (WSN) etc

3. Advance Communication
Advanced and high reliability data links, e.g. CAN bus, LIN bus. Physical
limitations on data links e.g. Ethernet, USB etc. Internet-linked embedded
systems.

4. Cut-edge Technology in embedded Systems
Advanced Languages Survey - Java Application on embedded Systems,
Multitasking and its relative merits in embedded environment. The Real
Time Operating System (RTOS) etc

SPECIALISED Course
5. Sensors Interfacing II: Digital and Analogue Input/Output
i. Humidity, Dew point and Temperature Sensor (DHT22)
ii. Ultrasonic Range Finder Srf05 & Srf08
iii. Ultrasonic Transmitter/Receiver
iv. Infrared Receiver Module
v. HC-05 Wireless Bluetooth RF Transceiver Module serial.

6. Specialty
i. ARM Controller + Bluetooth: SM-RN RN42 module data serial transfer (M2M)
ii. ARM Controller + LinkSprite JPEG Infrared Color Camera TTL Interface:
Capture high pixel images and save into flash memory
iii. Network ARM Controllers using I2C protocol
iv. Networked ARM Controllers using CAN protocol
v. ARM Controller + EasyVR Shield 2.0: Voice Recognition Shield, voice
programmed into controllers and use for automation.
vi. ARM Controller + RN-XV WiFly: IoT (WIFI data transfer)
vii. ARM Controller + Ethernet: IoT
viii. PIC 18f + Bluetooth: Windows App – interfaces with PC (Laptop) GUI
to control and monitor devices. PIC RF Solutions with Bluetooth Module
TOOTHPIC-V2
ix. Arduino + 1Sheeld – Mobile Automation - integrated plugin on Android
smartphone for control of devices with your phone and Arduino; features
LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM,
Wi-Fi, GPS… etc


Kindly fill our registration form on:
http://atopetautomations.com/index.php/training/register

Please contact us on: http://atopetautomations.com/index.php/contact

Our Head Office ADDRESS:
ATOPET AUTOMATIONS LIMITED
SUITE C1, LACFOG PLAZA,
BESIDE CHOBA POLICE STATION,
EAST WEST ROAD, CHOBA,
PORT HARCOURT

EMAIL: admin@atopetautomations.com

CONTACT NUMBER: +(234) 09094009029

For more info visit: www.atopetautomations.com

ATOPET AUTOMATIONS LIMITED introduces Embedded Systems and Robotics Training.

Here is a review of our EMBEDDED SYSTEMS & ROBOTICS COURSE with Atopet Automations Limited.

FEATURING
o Microcontrollers
• ARM, Cortex M3 microcontrollers
• Arduino UNO/Nano microcontrollers
• Microchip PIC Microcontrollers

o Software
• Embedded C/C++ C/C++ Compiler e.g Kiel-C, Kiel UVision5
• ARM online compiler/Arduino Software IDE/ Microchip MpLAB IDE
• Proteus Professional, Multism, Utiliboard
• Tera Term, Cool term, serial monitor, etc.

BASIC AND INTERMEDIATE Courses
1. Introduction
The Embedded System, its characteristics and examples. Review of the
microprocessor and introduction to microcontroller. Microcontroller
architectures, memory map, instruction set.

2. Microcontrollers Core, Memory, and Architectures
Microcontroller Architectures, e.g. ARM Cortex-M3, Memory Technologies:
review of technologies applicable in embedded environment.

3. Sensors Interfacing I: Digital and Analogue Input/Output
Review of digital I/O, InfraRed PIR Motion Sensor, techniques of analogue
I/O, Data Acquisition – resolution and accuracy, ADCs, PWM sources and
applications. Interfacing to power devices, dc and stepper motors, dc
sources, servos etc, Piezo Buzzer, TruOpto Light Dependent Resistor (LDR),
LM335AZ - Temperature Sensor, LCD Display, Ultrasonic Module HC-SR04
Distance Sensor and One Wire Digital Temperature Sensor - DS18B20

4. Data Communications
Serial Ports, Review of simple serial protocols, e.g. SPI, I2C bus.
Overview of advanced and high reliability data links, eg CAN bus.

5. Dealing with Time
Interrupts and their structures, latency, priorities, overview of complex
counter/timer structures and their applications

6. Software Development
Survey of embedded C, C++, Software Design. Structured software design.
Challenges of applying C to embedded environment. Typical C compilers.
Safety conscious C. Overview of multitasking. The Real Time Operating
System (RTOS): tasks, priorities, scheduling.


ADVANCED Course
1. Power Supply, Processing and Management
Supply management. Brown-out and reset issues. Design for Low Power: power
supply and management in a power conscious environment. Features of a low
power microcontroller and their application, optimization through use of
Sleep and Idle modes, and clock switching, Low power circuit design.

2. Internet of Things (IoT)
How the Next Evolution of the Internet Is Changing Everything, IoT as a
Network of Networks, Online and Offline Embedded systems, WIFI, People and
Things Connecting to Internet, Wireless Sensor Networks (WSN) etc

3. Advance Communication
Advanced and high reliability data links, e.g. CAN bus, LIN bus. Physical
limitations on data links e.g. Ethernet, USB etc. Internet-linked embedded
systems.

4. Cut-edge Technology in embedded Systems
Advanced Languages Survey - Java Application on embedded Systems,
Multitasking and its relative merits in embedded environment. The Real
Time Operating System (RTOS) etc

SPECIALISED Course
5. Sensors Interfacing II: Digital and Analogue Input/Output
i. Humidity, Dew point and Temperature Sensor (DHT22)
ii. Ultrasonic Range Finder Srf05 & Srf08
iii. Ultrasonic Transmitter/Receiver
iv. Infrared Receiver Module
v. HC-05 Wireless Bluetooth RF Transceiver Module serial.

6. Specialty
i. ARM Controller + Bluetooth: SM-RN RN42 module data serial transfer (M2M)
ii. ARM Controller + LinkSprite JPEG Infrared Color Camera TTL Interface:
Capture high pixel images and save into flash memory
iii. Network ARM Controllers using I2C protocol
iv. Networked ARM Controllers using CAN protocol
v. ARM Controller + EasyVR Shield 2.0: Voice Recognition Shield, voice
programmed into controllers and use for automation.
vi. ARM Controller + RN-XV WiFly: IoT (WIFI data transfer)
vii. ARM Controller + Ethernet: IoT
viii. PIC 18f + Bluetooth: Windows App – interfaces with PC (Laptop) GUI
to control and monitor devices. PIC RF Solutions with Bluetooth Module
TOOTHPIC-V2
ix. Arduino + 1Sheeld – Mobile Automation - integrated plugin on Android
smartphone for control of devices with your phone and Arduino; features
LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM,
Wi-Fi, GPS… etc


Kindly fill our registration form on:
http://atopetautomations.com/index.php/training/register

Please contact us on: http://atopetautomations.com/index.php/contact

Our Head Office ADDRESS:
ATOPET AUTOMATIONS LIMITED
SUITE C1, LACFOG PLAZA,
BESIDE CHOBA POLICE STATION,
EAST WEST ROAD, CHOBA,
PORT HARCOURT

EMAIL: admin@atopetautomations.com

CONTACT NUMBER: +(234) 09094009029

For more info visit: www.atopetautomations.com

ATOPET AUTOMATIONS LIMITED introduces Embedded Systems & Robotics Training

Here is a review of EMBEDDED SYSTEMS & ROBOTICS COURSE with Atopet Automations Limited.

FEATURING
o Microcontrollers
• ARM, Cortex M3 microcontrollers
• Arduino UNO/Nano microcontrollers
• Microchip PIC Microcontrollers

o Software
• Embedded C/C++ C/C++ Compiler e.g Kiel-C, Kiel UVision5
• ARM online compiler/Arduino Software IDE/ Microchip MpLAB IDE
• Proteus Professional, Multism, Utiliboard
• Tera Term, Cool term, serial monitor, etc.

BASIC AND INTERMEDIATE Courses
1. Introduction
The Embedded System, its characteristics and examples. Review of the
microprocessor and introduction to microcontroller. Microcontroller
architectures, memory map, instruction set.

2. Microcontrollers Core, Memory, and Architectures
Microcontroller Architectures, e.g. ARM Cortex-M3, Memory Technologies:
review of technologies applicable in embedded environment.

3. Sensors Interfacing I: Digital and Analogue Input/Output
Review of digital I/O, InfraRed PIR Motion Sensor, techniques of analogue
I/O, Data Acquisition – resolution and accuracy, ADCs, PWM sources and
applications. Interfacing to power devices, dc and stepper motors, dc
sources, servos etc, Piezo Buzzer, TruOpto Light Dependent Resistor (LDR),
LM335AZ - Temperature Sensor, LCD Display, Ultrasonic Module HC-SR04
Distance Sensor and One Wire Digital Temperature Sensor - DS18B20

4. Data Communications
Serial Ports, Review of simple serial protocols, e.g. SPI, I2C bus.
Overview of advanced and high reliability data links, eg CAN bus.

5. Dealing with Time
Interrupts and their structures, latency, priorities, overview of complex
counter/timer structures and their applications

6. Software Development
Survey of embedded C, C++, Software Design. Structured software design.
Challenges of applying C to embedded environment. Typical C compilers.
Safety conscious C. Overview of multitasking. The Real Time Operating
System (RTOS): tasks, priorities, scheduling.


ADVANCED Course
1. Power Supply, Processing and Management
Supply management. Brown-out and reset issues. Design for Low Power: power
supply and management in a power conscious environment. Features of a low
power microcontroller and their application, optimization through use of
Sleep and Idle modes, and clock switching, Low power circuit design.

2. Internet of Things (IoT)
How the Next Evolution of the Internet Is Changing Everything, IoT as a
Network of Networks, Online and Offline Embedded systems, WIFI, People and
Things Connecting to Internet, Wireless Sensor Networks (WSN) etc

3. Advance Communication
Advanced and high reliability data links, e.g. CAN bus, LIN bus. Physical
limitations on data links e.g. Ethernet, USB etc. Internet-linked embedded
systems.

4. Cut-edge Technology in embedded Systems
Advanced Languages Survey - Java Application on embedded Systems,
Multitasking and its relative merits in embedded environment. The Real
Time Operating System (RTOS) etc

SPECIALISED Course
5. Sensors Interfacing II: Digital and Analogue Input/Output
i. Humidity, Dew point and Temperature Sensor (DHT22)
ii. Ultrasonic Range Finder Srf05 & Srf08
iii. Ultrasonic Transmitter/Receiver
iv. Infrared Receiver Module
v. HC-05 Wireless Bluetooth RF Transceiver Module serial.

6. Specialty
i. ARM Controller + Bluetooth: SM-RN RN42 module data serial transfer (M2M)
ii. ARM Controller + LinkSprite JPEG Infrared Color Camera TTL Interface:
Capture high pixel images and save into flash memory
iii. Network ARM Controllers using I2C protocol
iv. Networked ARM Controllers using CAN protocol
v. ARM Controller + EasyVR Shield 2.0: Voice Recognition Shield, voice
programmed into controllers and use for automation.
vi. ARM Controller + RN-XV WiFly: IoT (WIFI data transfer)
vii. ARM Controller + Ethernet: IoT
viii. PIC 18f + Bluetooth: Windows App – interfaces with PC (Laptop) GUI
to control and monitor devices. PIC RF Solutions with Bluetooth Module
TOOTHPIC-V2
ix. Arduino + 1Sheeld – Mobile Automation - integrated plugin on Android
smartphone for control of devices with your phone and Arduino; features
LCD Screen, Gyroscope, Switches, LEDs, Accelerometer, Magnetometer, GSM,
Wi-Fi, GPS… etc

Visit us at: www.atopetautomations.com

Kindly fill our registration form on:
http://atopetautomations.com/index.php/training/register

Please contact us on: http://atopetautomations.com/index.php/contact
Our Head Office

ADDRESS:
ATOPET AUTOMATIONS LIMITED
SUITE C1, LACFOG PLAZA,
BESIDE CHOBA POLICE STATION,
EAST WEST ROAD, CHOBA,
PORT HARCOURT

EMAIL:
admin@atopetautomations.com

CONTACT NUMBER:
+(234) 0909-400-9029