₦airaland Forum

put up pictures for interested buyers instead..what is the brand and model number of the TV?

Please share latest update with us now

So what would be the cost of clearing Camry 2007 model using shared container from Canada?

oliverjiad:
evening

don't have ideal of any shipper in the Canada but as for the shipment from Canada it'll be shipped via container not roro

cost of clearing it's as details below

Mazada5 2009 Model:#700,000, 2009 Hyundai Sanfe:#850,000 2008 Nissan Rogue:#750,000

Regards


jaid

@ saydfact,
You simply the best baba!

Site is located at Odogunyan somewhere off sagamu express.

Anytime in November should be a good time to hit the site now seems the rains are clearing gradually now.

So you mean one can choose to bargain with the main bricklayer to pay for the construction in phases or do entire costing from start to finish?

Would engage reputable suppliers for strictly gravel

Saydfact,
On the minimum to commence a 3 bedroom bungalow from foundation to lintel phase in ikorodu, I intend starting to gather the following materials on site now for work to start shortly after the rains are over so it's omo onile, labour and cement I would be sorting by then.

1. 20 tonnes of sand is that same quantity as double tipper please?
2. Double tipper of gravel
3. 1,000 pieces of 9 inch block for foundation and all surrounding external walls
4. 1,500 pieces of 6 inch block for dividing walls

My questions are
Is there anything I'm missing as a starter in this estimate?

Gravel and granite which do you recommend and why please?

Would the double tipper gravel be sufficient for foundation, German floor and lintel?

The number of bricklayer and labour on site wouldn't determine speed at which we can complete these phases? I'm looking at hitting lintel stage in 10days from start is that achievable?

Oga Rotech77,
Seems you didn't raft the gate house right as captured in this picture? Any reason for this please.

rotecch77:
Security house foundation done

Oga GAZZUZZ, find u on Google or where now Bros.. Abeg help a brother pls

GAZZUZZ:
find me.... there's a fee

Oga Gazzuz
Upholstery cost how much please?

Can you also share the contact of the guy as well?

GAZZUZZ:
Update on upholstery.

www.nairaland.com/attachments/5783522_img20170808183811_jpeg4ad72c59a44bf64ebe5a0bd46c59dd23

www.nairaland.com/attachments/5783663_img20170808183406_jpeg3ca37ed72bcd26183b63725e290e6bbf

Colour of fabric is a pass. Got the right colour, with the right pattern.
The headrests on the 2front chairs were not done. I will be installing DVD headrests on the chairs.

www.nairaland.com/attachments/5783642_img20170808183458_jpeg4c979aa3922f510e69b672b43b3c8130

www.nairaland.com/attachments/5783649_img20170808183440_jpeg2889578fb63fe92dfaf8935513e435ce
Quality of work is fair, not extremely wowed, by it but it will pass.

Overall it looks ok
www.nairaland.com/attachments/5783619_img20170808183642_jpeg90ab3950a0209d187aca931cf7cc268d

www.nairaland.com/attachments/5783627_img20170808183648_jpeg8607222634a0669d2e9d72013b56b79f

www.nairaland.com/attachments/5783679_img20170808183623_jpeg945aba886326f71e40e17abbec46f813

www.nairaland.com/attachments/5783376_img20170808183636_jpeg30f45c662ff88124580449c49cd7e744

www.nairaland.com/attachments/5783642_img20170808183458_jpeg4c979aa3922f510e69b672b43b3c8130
His sewing is very good in some places, and crooked in others. it was not very consistent.

www.nairaland.com/attachments/5783629_img20170808183629_jpegc3ef38175431f651a7e42b1739c8b521

www.nairaland.com/attachments/5783816_img20170808164013_jpeg815b2b6772f991c66d86f86fca818c8b

www.nairaland.com/attachments/5783790_img20170808204447367_jpeg5231e919097956a2691ea46cafa9a52e

www.nairaland.com/attachments/5783786_img20170808204541001_jpeg4a9c011bcab6fa442d15b3b4aac75424

www.nairaland.com/attachments/5783775_img20170808205604059_jpeg70c08cdb1ae082773d95bc40dc200241

[img][/img]
He also kept my airbag tags. That made me happy.

www.nairaland.com/attachments/5783639_img20170808183518_jpeg80391f295ef84aa79ba0e1c378d13a8b

See onyibo factory spec

www.nairaland.com/attachments/5783609_img20170808183752_jpeg210650430acdda452819e8feb2cc4b5b

See the one I got

www.nairaland.com/attachments/5783618_img20170808183741_jpeg14506ab0e213e8acdee74754d1bd5a75

Next is a tracking device.

Bros,
What would be total cost of this item (Ignition switch)

https://www.amazon.com/ACDelco-96628500-Ignition-Starter-Assembly/dp/B00493V1IY/ref=sr_1_1?s=automotive&ie=UTF8&qid=1501965988&sr=1-1&keywords=96628500

Where is your pick up location situated?

Is there really anywhere in that ibeju lekki axis that one doesn't require raft foundation?

What is the proximity of the site to Beechwood estate please?

Cc:
mufutau55
EgunMogaji
HsLBroker
Abdulwastecx
segzy14
spyder880

Viktoreze:
No it won't require a raft foundation

Yes only up to 3 months... because we start development immediately after sales

Yes all necessary documents are available for viewing

You can start work immediately after all payments have been made

hello,
Would this soil still require a raft foundation considering its not a smarmy area?

Do you offer instalmental payments?

What is the adoption rate for this location?

Do you have all the necessary papers from government and locals?

How soon can one get to start work on this site?

Bros do you have an estimate for your requirement yet? I'm also interested in putting up something similar to your request why i ask, please share any more info you got..Thanks !

mrayosexy:
HELLO SIR,

PLEASE IN A ROUGH PRICE, HOW MUCH IS IT TO COMPLETE A 3 BEDROOM BUNGALOW IN IBADAN OYO STATE.

1 BEDROOM EN-SUITE
2 AVERAGE BEDROOMS WITH A TOILET AND BATHROOM IN THE MIDDLE
KITCHEN AND OTHERS. SOMETHING VERY MODERATE.
SOMETHING SIMILAR TO THE ONE YOU ARE BUILDING IN SULEJA


AM JUST AN AVERAGE SALARY EARNER BUT I WANT TO START BUILDING MY OWN HOUSE.

CAN YOU ALSO WORK/BUILD IN IBADAN AS WELL.

KIND REGARDS
AY.

hello bros,
Where is this your site located please? As i noticed cost has been relatively low

Cost of POP breakdown? POP for the entire house or living room only?

Total cost so far from start to this level

@feelme You are out of town abi offline? Been trying to reach us since oh, Holla at ur boy abeg

feelme3:
@buddie. Yes bro. Haven't experienced the stalling ever since. However, recently I started experiencing a drag...I don't know the term but like if I have to make a complete stop in traffic, when I try to move again, the car will just rev without power, then a jerk and it catches. Most of the time I have to disengage and engage the gear again. Doesn't happen frequently but when it does its embarrassing. Haven't been able to figure what the problem is yet.

Bro are you based in lagos?

Want to relate with you based on this maxima stalling Palaver abeg

feelme3:
@buddie. Yes bro. Haven't experienced the stalling ever since. However, recently I started experiencing a drag...I don't know the term but like if I have to make a complete stop in traffic, when I try to move again, the car will just rev without power, then a jerk and it catches. Most of the time I have to disengage and engage the gear again. Doesn't happen frequently but when it does its embarrassing. Haven't been able to figure what the problem is yet.

Installing these Rosas on existing ceiling also requires scaffolding or anything to support them after fixing?

Have been thinking of putting on on my plain decking to add some swag to the house since

Qconceptz:
Talk to us today, we are very affordable

WhatsApp 07057580444

SolnergyPower:
Batteries Charge Current
The charge current of a battery is determined by the size of the battery.

For the sake of this tutorial, we shall use a 200Ah battery.

There has been conflicting advise on the percentage of the amperage(Ah) of the battery that should be the charge current of the battery.

The charging current of a battery should be in-between 7% and 30% of the battery Ah.

An ampere hour(Ah) is the amount of energy charge in a battery that will allow one ampere of current to flow for one hour.

For this tutorial, we shall take 10% as our charge current.

So the charging current of a 200Ah battery is

200Ah x (10/100) = 20A.

Battery Charging Time
The simple formula to determine the charge time of a battery goes thus

Charging time of Battery = Battery Ah/Charging Current

ie

T=Ah/A.

The charging current of our 200Ah battery we calculated then was 20A. But due to losses, we can take 22A to 24A. So let's take 23A.

Therefore, the charging time of our battery will be

T=Ah/A

T=200Ah/23A

T= 8.9h (This an ideal situation)

Practically, it's noted that there is about 40% loss while batteries are charging. If we factor in this loss, we shall have...

200Ah x (40/100) = 80Ah,

Therefore the total Ah of our 200Ah battery now becomes

200Ah + 80Ah (losses) = 280Ah.

So the practical charging current of our 200Ah is

Charging time of Battery = Battery Ah/Charging Current

T=Ah/A.

T= 280/23

T=12.18h.

Note: This charge time is based on the fact that the battery was totally drained.

The tutorial classes has finished? Or is it because the page had been hijacked by our prospective buyers and sellers?

Please come and complete what you started jor

ajaolu:
Please house I urgently need your help. I need to buy a 24v pure sine wave inverter at most 1.5kva but preferably 24v, 1kva capacity but this is scarce. I am currently considering a BTS inverter which I saw on Konga and Jumia, please is that a good inverter? Which other one can you recommend. Thanks.

You might want to check this good offer out
https://www.nairaland.com/3910302/used-1.5kv-sukam-inverter-sale

Reasons for selling? Why is it coming so cheap? Previous history could help prospective buyers also

Hello House,
I have a used Sukam 1.5KV inverter for sale in good working condition. Feel free to contact me if interested.
Price is 45K.

Hello House,
I have a used Sukam 1.5KV inverter for sales in good working condition. Feel free to contact me if interested.
Price is 55K.

Oga Mikkyangel,
Pls what is total cost to land this in lagos?

Honda differential fluid VTM-4

http://m.ebay.com/itm/172762786737

Do you have the 1 litre bottles of this vtm4 and how much?

How do you separate noises caused by this and wheel bearing noises?

luvinhubby:
Start by checking the state & level of your differential fluid (that big round thing inbetween your back tyres).
You may need something like this.
A VTM-4 fluid.

Thought the boss doesn't handle vehicles less than year 2003..or your 1997 is just the few specials?

krisrock:
That is not the EGR valve, it's actually the EGR Vacuum Modulator. The one beside it is the EGR valve. The pipe blocked with the broom should go to the vacuum switch valve(vsv) which Toyota hid under the car(you go sweat to lose am if e don spoil) and another pipe should go from the vsv to the EGR valve. I have a 1997 Camry and me and Oga gazzuzz had to relocate the position of the vsv to some place more reachable. If connected properly you should see improvements in your gas mileage . I sha know it's all part of the breathing system of the car sha. Maybe oga gazzuzz fit help expatiate. My car has the P0401 code which I believe yours will have too and your check engine light should be on. I and Oga gazzuzz have tested the EGR valve and it works fine, changed vsv but yet to change that modulator which I hope will be the culprit of my check engine light

kiekie1:
Sorry for the late reply !

Its a working mercury tubular 220a battery ..
#NOTE: reason for sale > client wld be traveling for a long while and can't keep up with maintenance .. You can simply reach me faster -* 0 8 1 3 5 0 3 1 9 5 1

Oga Kiekie1 how many watts solar panel was supporting this solar setup then please?

Oga AutoElectNG,
What code should one look out for a failing ECU when vehicle is scanned? 1996 Nissan maxima has been giving some headache and my kazeem believe the ECU might be bad requiring replacement.

Is the free consultation for Nissan car still available?

Oga what is your budget?