₦airaland Forum

cold: Are you serious? You're going to put the blame on the train? You think a train's brakes are ABS designed? Lmao! A train's brakes are air filled & do not stop on impact but requires a certain distance to come to a complete halt. This is because of the speed,length & weight of the train

A moving train contains energy, known as kinetic energy, which needs to be removed from the train in order to cause it to stop.  The simplest way of doing this is to convert the energy into heat.  The conversion is usually done by applying a contact material to the rotating wheels or to discs attached to the axles.  The material creates friction and converts the kinetic energy into heat.  The wheels slow down and eventually the train stops.  The material used for braking is normally in the form of a block or pad.The vast majority of the world's trains are equipped with braking systems which use compressed air as the force to push blocks on to wheels or pads on to discs.  These systems are known as "air brakes" or "pneumatic brakes".  The compressed air is transmitted along the train through a "brake pipe".  Changing the level of air pressure in the pipe causes a change in the state of the brake on each vehicle.  It can apply the brake, release it or hold it "on" after a partial application.