₦airaland Forum

Welcome, Guest: RegisterLoginWith GoogleTrendingRecentNew

Stats: 3,325,282 members, 8,421,171 topics. Date: Friday, 05 June 2026 at 09:36 PM

Toggle theme

Cuks's Posts

Nairaland ForumCuks's ProfileCuks's Posts

1 (of 1 pages)

AutosRe: Honda CB 400 Power Bike For Sale. by cuks(m): 7:16am On Dec 21, 2021
I need it how can i call you?
09055546458
AgricultureRe: Pig Farmers Lets Meet Here by cuks(m): 12:42pm On May 11, 2019
hi everyone
am into pig farming with lots of confused breads.
finally i got in contact with AMSUNY right here in nairaland and got what you called camborough, when i got home the winners are 5X my 3months old pigs. also to comfirm that what he sold to me where really 2monts+ old, l put them togethe with a pregnant sow and the started to suck from her. thank you nairaland..
pls l also need help on there feed.
l have access to the following.
1. corn chaff from pap
2. fish dust/wasts from market women
3. cassava peel
4. cassava waste from "akpu" processing (fermented and sun dried)
5. PKC
6. Bambara nut waste
7. salt
pls help. am not on whatsapp yet.
AgricultureRe: Pig Farmers Lets Meet Here by cuks(m): 11:57pm On May 05, 2019
hi all,
please am in need of purest Bread line "first generation" CAMBOROUGH WEANERS, One male and two females, 08070597090 location is Enugu State But Dont Worry I Can Travel Far When I See What I Want.
AgricultureRe: Pig Farmers Lets Meet Here by cuks(m): 6:42am On May 05, 2019
dejia:
Hello Pig Farmers,

Its been awhile i took time to write on this platform, hope are pigs are happy and healthy? i hope we are still able to balance their diet, with the high cost of feed which unfortunately has been very hard to pass it on to the middle men and consumers.

Today, i will like to debunk.. what seems to be a growing believe in the Nigeria pig industry, its about White colour pigs'

I know Genetics and Breed is a very delicate topic, every farmer has its own believe, we have no standard, no research institute to help, so.. every single farmer his a genetics expert and tells you from his own experience. ( I dont blame us all).

Pig Genetics is a very controversial topic in Nigeria because we have few breeding farms, and no standard to back it up; Lately alot of Pig farmers are looking for better genetics with better FCR ( Food conversation Ratio), they want a pig that will get to a 100kg within the shortest time.

I have written on my view about this in previous post, on why i think Breed is not all that its required, we have to Balance Breed, with Feed and Management.


To the Main reason for this post.

Alot of Pig farmers believe, White colour pigs are the best, they are Camobourough ,Camobourough are only white, if it is not white in colour its not a camobourough!..

Uhmm, i totally disagree.. and i will like to change the mindset of those with those believe...

i love to write with lay man terms ( parables), so that new farmers can also learn,.. its like someone telling you that all Toyota cars are white,... or all Toyota are Silver colour Or All toyota are Corolla, Or All Toyota cars are made in America; because Toyota corrolla is common and parts are readily available,parts are cheap and easy to maintain and popular. In your case, the toyota you require might be a Prado, maybe because of the weather/climate in your environment or terrible road. You might be better off with a V8 Land cruiser, in your area because you get fuel for free ( cheap feed)..

Lastly, when next a farmer tells you, his pig is Camobourough, please ask him, which Camobourough? ( Which To
yota, Is it a Camry, its Prado or a
Corolla? he should also tell you which year model.. a Toyota
camry 1999 is diffrent from Toyota Camry 2016.Every year genetics are improved upon and released into the market; same with Pigs.

Just my 2kobo advice for today.
Business To BusinessRe: AFFORDABLE PEANUT COATING MACHINE MANUFACTURER by cuks(m): 9:46pm On May 02, 2019
pakingzzzz:
Greetings
Hi pakingz, it Chuks the gas turbine developer. Got a notification from nairaland that you sent me a mail But I coudnt trace it. Sorry not use to this place.
AutosRe: For All The Bykers & Lovers of speed>>> MTT Y2K: The Turbine Powered Superbike! by cuks(m): 1:15am On Oct 13, 2018
Hi, I plan making mine with my homebuilt gas turbine Currently undergoing test..
See video..


https://www.youtube.com/watch?v=ffffbE-iSU8&app=desktop
Science/TechnologyRe: Homebuilt Radio Control Airplane by cuks(m): 1:08am On Oct 13, 2018
Hi all, pakingzz

My homebuilt jet engine videos is out.


https://www.youtube.com/watch?v=ffffbE-iSU8&app=desktop
Science/TechnologyRe: Homebuilt Gas Turbine Engine For Helicopter Propulsion. by cuks(m): 12:58am On Oct 13, 2018
Hi all, sorry I didn't post this early enough.
Watch my jet engine videos


https://www.youtube.com/watch?v=ffffbE-iSU8&app=desktop
TravelRe: 11ft In Diameter, World's Largest Jet Engine Takes To The Skies(Photos) by cuks(m): 12:54am On Oct 13, 2018
Sorry if this is off topic,
Check out my 222mm homebuilt jet engine.
Video

https://www.youtube.com/watch?v=ffffbE-iSU8&app=desktop
Science/TechnologyRe: Homebuilt Gas Turbine Engine For Helicopter Propulsion. by cuks(m): 5:38pm On May 10, 2017
Pakingzzz:
Nice work you are doing here.. I can see a great degree of success..
Just keep it going man.
Thrust shouldn't be a problem now. Remember you are going to be using your gas turbine to drive the shaft of your helicopter..
You should focus on adding another turbine blade. So you can use the power of the second turbine as your output shaft. But remember that you must use a reduction gear to reduce the rotation of the output shaft considerable, so you will have enough torque available for turning the main blade and the tail blade.
Goodluck
thanks pakingzzz,
my engine is made to produce ~40-45kg of thrust and that must be considered before choosing a free power turbine for the engine if am going to use it, too little flow and throat area will couse the engine to over heat and when too big will waste the exhause power. plus the gear box gear ratio will depend on the free stage max rpm and HP.
it can actually give me that thrust but at the expence of the exhaust temp that might result in melting my turbine blade.
so am currently getting ride of any vibration and frictions in the shaft tunnel and the turbine-to-shroud tolerance that might be coursing restrictions to the rotor,
I believe thats where I should start from.


though I dont intend using that for my helicopter project but I still think I need to make sure it works exactly as the theory says it should,

I would have loved to start my own thread on naira land but that will be pointless since the project have been completed,
but I will surely do that when the helicopter build starts, and ofcouse it will start with the engine build and ends with a successful coaxial helicoper and I will share every details.
yes, coaxial that means no tail rotor, so am going to need high torque and horsepower to do that.
its going to feature a twin gas turbine engine.

thanks
Science/TechnologyRe: Nigeria Man Kehinde Durojaiye Invents A Jet Car by cuks(m): 1:39am On Apr 26, 2017
more on my amature build.

Science/TechnologyRe: Nigeria Man Kehinde Durojaiye Invents A Jet Car by cuks(m): 1:37am On Apr 26, 2017
now look were I started

Science/TechnologyRe: Nigeria Man Kehinde Durojaiye Invents A Jet Car by cuks(m): 1:36am On Apr 26, 2017
more

Science/TechnologyRe: Nigeria Man Kehinde Durojaiye Invents A Jet Car by cuks(m): 1:33am On Apr 26, 2017
more pics

Science/TechnologyRe: Nigeria Man Kehinde Durojaiye Invents A Jet Car by cuks(m): 1:30am On Apr 26, 2017
hmmmmmmmm, its not easy to gather scrab and make them look like anything.

am Chuks Anthony, born on 1995.

I did my first jet when I was nine years old. no body knew what it was, I thought I knew it but when time passes I came to realise I knew nothing.

but I kept pushing and pushing.

I ignored people trying to post and talk what they are not sure about becaue I knew my plan was not for people to clap and throw money on me.

if I hard said I needed help, believe me no body would have known were to help me from.

I made about 4 uncompeted engines but learnt from its individual components.

but now I did Not invent but i builth a working gas turbine engine from scratch after failing for the last time.

its my own design, every component except for the turbo charger shaft and in impeller is designed and dimmentioned by me.

its true one man can not build a car or a bicycle but one man/person started it.

everything you see today is being invented by a backyard thinker but yes modified by PHD holders after they understand what the thinker is thinking.

Igbo, Housa or Yoruba shouldnt be mentioned in stuffs like this.

the man had just expressed what he thinks..... only if he had started earlier maybe in his tens.

lets works together and make change. it might take us time, maybe a year or a decade.

pics of my gas turbine .

Science/TechnologyRe: RC Cars, Drones And Planes by cuks(m): 12:50am On Apr 26, 2017
Nice work men,

soon enough and we can make everything ourselves without buying from other countries.

currrently working on my gas turbine.

Science/TechnologyRe: Homebuilt Gas Turbine Engine For Helicopter Propulsion. by cuks(m): 12:41am On Apr 26, 2017
Blakjewelry:
More gas to your turbine brother, It is this kind of projects I want to see. If not the recession that is biting hard i would have love to support financially
thanks,

the noise of my gas turbine is just blocking my ears from hearing the sound of our countries recession
Science/TechnologyRe: Homebuilt Gas Turbine Engine For Helicopter Propulsion. by cuks(m): 12:37am On Apr 26, 2017
Xway:
longest nigga
yeah,

always on my plan of changing parts when they dont fit in well.

you know me from somewere?
Science/TechnologyRe: Homebuilt Gas Turbine Engine For Helicopter Propulsion. by cuks(m): 2:07am On Apr 25, 2017
more on my gas turbine engine.

love you all.

Science/TechnologyRe: Homebuilt Gas Turbine Engine For Helicopter Propulsion. by cuks(m): 1:56am On Apr 25, 2017
hi all,

am happy a fellow Nigerian is dreaming on building a gas turbine engine.

Am to encourage you and also let you know that its very possible to build a running engine with less troubles.

am Chuks Anthony From Oduma Aninnri L.G.A, Enugu State.

am a Jet lover too, with my little experience I have built few gas turbine but not all that worked.

but believe it or not i now have a working gas turbine engine I built from scratch.

the required thrust is not achieved so am not too happy yet.

my new gas turbine am designing now for my helicopter project will cure all my heart breaks, its going to be large.

below are few pics of my currents woring gas turbine engine....

1 (of 1 pages)