₦airaland Forum

helinues:
They have not even been registered but already confused.

ADA ko, OKO ni. The gathering of losers

You're far beyond redemption and no doubt you've exchanged your soul for those stipends you get from this evil regime. Enjoy it while it lasts.

Creditalerts:
I'm experiencing this it's not crossing 53.4 pls any help.thanks in advance

I'm using 420 wat panel 8 for this setup

It will charge and stop charging after 3mins pls help thanks

Good morning.
You'll have to adjust some settings in your charge controller.

Change battery type to LiB (Lithium battery)
Then chose 48v as battery voltage
Adjust the charge voltage and float to 58 or 58.4V.

My ogas in the group will add more voice to this post. They contributed immensely to my ability to have my setup running smoothly.

Ameboperoo:
Media star is a free to air decoder and you have access to many changes especially if you use multiple dishes/lnbs.
You can check lingsat for channels list on moreplex and make decision for yourself.

Alright. Thanks

Ameboperoo:
I bought and installed for some before.
The package is okay if you're not looking for sport o

Oh okay, thanks for the information.
Sport is not really necessary.

What about Mediastar, do you think it's a better option.

Good day everyone.

I came across this pay tv (moreplex tv) with lots of ? exciting packages.

Has anyone tried it out?

baggiosne:
I'm in oyo state

Ok. It's far.

How much is TIGER decoder, what size and type of dish is needed and How much is it?

baggiosne:
your location?

Owerri

adubam:
All modern decoder and even old decoders will give you MBC

Thanks
Pls can you recommend anyone.

adubam:

https://www.youtube.com/watch?v=X4VF8MvDjBQ

Good day.
Pls I'll like to know if there are sat tv decoder that air the MBCs.

Elizkid:
Does anyone have an experience with this?

How does one know if it’s genuine lifepo4 battery, as I don’t know if Cworth has a warehouse situated here.

The price is 276k.

It's 177k, if you're getting it from Cworth distribution center.

Jefferyzz:
If ur battery has comm port, plug in the cable and select the right lithium profile, if not use user defined n use 14v as bulk and float voltages.

Thanks.
Today, the sun was so bright that the batteries had no choice than to hit 14.4/14.8v before CC disconnected charging. C.C resumes charging once battery drops to 13.2v.

Jefferyzz:
If ur battery has comm port, plug in the cable and select the right lithium profile, if not use user defined n use 14v as bulk and float voltages.

Yes It has a comm port

olujosh301:
Change your float and absorption to 14.2v
What kind of cc and solar array do you have?

Ok noted.

Felicity 80A MPPT Charge controller

620W Jinko Panels in series

Rumplesteelskin:
Yes, that’s what all my tests are pointing to.

For context: Before the Haisic battery arrived, I was using a custom-built lithium battery with my 3kVA hybrid inverter and 24V solar setup. With eight 200W solar panels on the roof, I could charge the battery from 24V in the morning to 29.2V by 1–3 PM, depending on sunlight.

The Haisic arrived and got stuck at 27.2V on day one. I initially thought the issue was charging current. My inverter supports 30A for AC charging, the charge controller is rated 60A, and the battery’s recommended charge current is 40A. So, I ruled out current as the problem.

Did a drain test, still stuck at 26.8-27.2 V after hours of charging. Did the final test today, disconnected the inverter from the battery, and the inverter went straight to 29.1 V, while the charge controller that is connected to the battery shows 26.8 V. So, I have ruled out the inverter limiting the charge current.

My guess is either the BMS is faulty or one or more cells are weak. Order the Coulomb meter posted here a few threads back, but it will take 3 weeks to get to me.

I've been experiencing something similar to this with my two Cworth 12v Lifepo4 batteries connected in parallel. The voltage hardly crossed 13.3v despite several hours of full sunshine.

fuckboys:
new felicity charge controllers dont draw power from the batteries only from your pv. youll have to connect it to pv to power it on

Batteries have refused to cross 13.3v.

I'm using the Lib battery type and it's bulk and float charge voltage is both 14.4v.

Jefferyzz:
Put on the panel breaker. It should come on. At times, it won't display anything till it recognize panel input.

Panel successfully installed....
Charge controller woke immediately it sensed power from the panels.

But I have a new challenge. My batteries have not crossed 13.3v (3 bars). It stays at that voltage without getting to the 14.4v despite the huge power from the charge controller.
I don't know if there's a setting in the charge controller that is responsible for this.

fuckboys:
new felicity charge controllers dont draw power from the batteries only from your pv. youll have to connect it to pv to power it on

Ok thanks.
I'll check it After panel installation

Jefferyzz:
Put on the panel breaker. It should come on. At times, it won't display anything till it recognize panel input.

Thanks
I have not installed the panels. I'll check it out when the panels are installed.

Abeg make una help me o.

I bought Felicity 80A MPPT Charge controller sometimes last two weeks from a dealer but ever since then it's just yesterday I decided to tried it out.

But lo and behold, controller did not turn on. I don't know If this is how Felicity charge controller behaves or is there anything wrong with this particular one? Or maybe it will turn on when I connect my panels to it.


My setup is two 12v Cworth Lifepo4 batteries connected in parallel and a 12v sachet inverter. The battery is about 13v at the moment and it's currently supplying the inverter.

McLizbae:
Sell the tubular batteries and get sealed lead-acid batteries. A good one will give you at least 4-5 years. No emissions too.

From frypan to fire...

lemoma:
Solar will carry AC fan with ease but AC fans consumes more power than DC fans

Also, ac fans can makes some human noise while ok inverter

That humming sound goes with Modified sine wave inverters not Pure sine wave inverters.

Pure sine wave inverters give out clean steady power with stable voltage than national grid.

OlawaleBammie:
Jesus!!!

Wey I still dey put mind for 2.5m

You can start small then grow bigger with time

Skyfornia:
You are right, but remember maintenance, though it's still cheaper.

I fill my inverter batteries with inverter(Distilled) water every month and it cost me N5000 to N10,000 monthly.

I don't know if there's anything I can do to reduce such.

Any advice from the professionals here will help. Thanks

Ditch your Tubular battery and embrace Lifepo4 batteries. With the latter, you don't necessarily need that monthly expenses on maintenance.

Tjra:
With this bed of 3 strange fellows, 2027 is already a walkover for Tinubu.

He does not need to campaign anymore.

Keep your opinion to yourself.

helinues:
What should we do to this now? Is she the only person who failed the course?

Abeg, make we dey discuss important issue affecting the country jare not all this petty discussion

See the nonsense coming out from that your trashy mouth. Have your really sold your soul to the devil to the extent that you support with full chest the tyranny of this present administration? What important issues is there to discuss other than the fascism of tinubu's administration.

Don't worry, the evil you support today will get back to you tomorrow.

PressMyButton:
If you're dull, you're dull and if you're good, you're good. Check the type of students behind notorious activities, they're most likely dull students. This girl is not only super dull but also ill- mannered and lacks home training. Rather than pay more attention on how she could improve her life, she was more dedicated to chasing clout on social media. Personally, I don't have pity on dull and ill-trained kids. By the time she rewrites the final papers atleast two more times, she will learn to focus more on the important aspect of her life.
Even our billionaire neighbors were happily singing " na our papa be this " when Mr President visited Anambra, how much more a bunch of little girls still relying on their parents pocket money or being fed by some sugar daddies. These are people changing names from Obidients to Rat-tels or whatever they call themselves. They are so dull and have nothing upstairs, the only thing they contribute to the society is nuisance value.
2 down, one to go.. if you know you know. Parents, train your kids, if you don't, they will collect it from outside.


After God, na Tinubu 💪 God bless Nigeria

What evidence can you tender to support your claim Mr Evaluator? Do you have details of her performance in her previous exams? If not, you've jumped into irrelevant conclusion and that's a public display of stupidity. Her IQ and level of reasoning may be far higher than yours, that's if at all you still have any sense of reasoning.

Well, we don't really doubt your high level of stupidity because your last sentence clears all doubt.

officialfestus:
final look.

Neat...
This is the real DIY

Iinnov8:
Yes, my oga. We sell genuine Tomzn MCBs. Below are MCBs and related offerings I have, as well as their prices:

8 way breaker box. Can accomodate 4 units of 2P (double pole) breaker or SPD
Price: 5,000

Tomzn 2P 600V DC SPD
Price: 12,000

Tomzn 2P 275V AC SPD
Price: 10,000 - Available in 2 weeks time

Tomzn 2P 60A DC Breaker
Price: 8,500

Tomzn 2P 16A AC Breaker
Price: 5,500

Tomzn 2P 60A adjustable over/under voltage protective device
Price: 12,500

I think the price list is okay

favouredbymercy:
The other option is better than this. Almost all jinko panels up to 605w have a current rating around 13amps. From 610w up has around 15amps (you can check out their specs sheets to confirm). Future expansion would most likely be series connection. So if you get the 620w panel now, know you would stick to the 610w + going forward.

Ok thank you

HeavenlyBang:
Fouani just dey do wetin sweet them this year.

I don't see why you'd have an issue with collecting the 580w and 590w sha. You'd just be losing 10w.

My major worry is the thought of when I want to upgrade my panel size in the future. Having different sized panels may affect my setup in the future. Another option I was given is to top up payment for two 620W panels.