₦airaland Forum

Penkelems:
LFT- Lymphatic filariasis Test?

Liver Function Test

..

favouredbymercy:
Wetin you suspect say kill the inverter? I been dey think say Bread inverter strong before.

I honestly can't say.

e just dey burn and beeping red

Gshems:
Me dey enjoy my bread. Quiet beast.

omo i don tire like this. My Bread inverter, barely-noticeable noise and beast mode stopped working last month and the support center just dey drag their feet so I got this Sako inverter.

The thing dey shout non-stop even under 100w load.

I no fit sleep

...

hoover420:
Quick question guys, I use a prepaid meter and mostly rely on NEPA (grid) power to charge my Haisic 1.5kVA inverter and its 3.6kWh battery. Will this charging process cause my prepaid meter units to drain faster? Cos I’m beginning to think I’m spending more recharging now that I even got solar

At 60A, your inverter will pull around 700-850w, just 300w shy of what an AC, hotplate, microwave etc will pull on normal operation. You normally don't put those on for long cos of the obvious.

If you must use grid, reduce your charging amperage to like 10-20A (slower) then use your solar panels. Or better still don't use solar at all.

You can also set a priority for solar if available over grid

hoover420:
Guys, I don’t understand how to read the percentage on this Deriy 3.6kwh.
I downloaded the BMS app used to monitor the battery and percentage but checking the app, it usually doesn’t correspond with what the battery percentage is showing on the battery itself.
Is there a way around it or I should just follow the readings on the app?

Free that voltage screen on the battery.

The app is your source of truth

Hello everyone,

Can somebody kindly advise on my chances with:

BSc. Computer Science,
Software Engineer for 5 years.


what is my best path?

hoover420:
Okay thanks. Quick question, do you use Nepa light to charge your inverter and how many hours does it take to full using it? Also, can washing machine be used with the inverter with no issues?

1. Nepa at 60A is around 1100w and takes like 3 hours
2. Yes it can, depending on the type. I use hisense twin tub

Unfaized:
Why are your 2 585w panels producing just 600w constant power to charge? Have you tried increasing the charging current?

Adjusted for real-life conditions.

I get > 800w but no be everytime

hoover420:
Guys, I have eventually gotten Deriy 3.6kwh Battery and Haisic 1.5kva from the ever reliable Dam5reey1 to begin my solar journey. My question is can I get a jinko 535 watt for a start and what other components do I need aside from the Battery & Inverter? PS My load is just 55 inch TV, 110 watt freezer & 2 fans. Also, is it advisable to use 5k stabilizer to charge the inverter since the electricity in my area is kinda low.

1. Yes you can but charging will be very slow. I use the same battery and have 2 585w panels. Takes about 6 hours to charge at 600w constant power. So do the math.
2. Solar cable from panel to inverter, wire from battery to inverter, voltage protection box, solar and NEPA breakers.
3. I don't use stabilizer for mine since the inverter trips (not Haisic) but I imagine you can

Topper33:
Thank you Sir


I think the Sako setup is looking good. Although the total cost is slight above my budget

Asides, these, do i need any other thing?

Breakers, cables and installation fee, changeover box

Topper33:
Hi Guys...

Please I need your help with a couple of thoughts:

My budget is 800k and I would like to get an Inverter setup. At the moment, my landlord does not permit Panel installment on his roof so I am stuck with just the grid.

Please honestly, what can I get with this budget interms of LiFePO4 inverter and battery setup solely being charged from the grid(for now)

You thoughts and honest recommendations would be highly appreciated

I am open to suggestions..

Thanks FAM

Check with @Damreey5
24v Haisic Inverter - 340k
Deriy 100A 2.56kwh 24v battery - 430k


Or Sako 24v inverter 340k
Luwatt 3.0kwh 24v battery - 490k


You can upgrade your backup time by buying more batteries in parallel. Don't buy 12v system

lol this AC thing dey legit?

when i dey use tubular i compared the distilled water to my AC own, e different o

dollarnaira:
Harvest it urself via air-conditioning water. Na distilled water be dat. It is far far better that tap water claiming distilled that most of you buy.

richy02:
Guys abeg nauuu, we never get light for a week now, I wan crase

1.5kva Bread Hybrid Inverter - 200k
3.6kwh Deriy Battery - 450k (confirm current price from @Dam5reey)
2 * 590w Jinko Panels from Fouani @240k

total - 990k.. you can get all this yourself.. for installer I have a trusted plug, u guys will discuss wiring and workmanship

fuckboys:
My system hasn't known a low battery since installation of 7 months now, I think today is the day it might 🤔.

LMAOOOOOOO same here o. I no dey off my fridge and big fan on my 3.6kwh Deriy battery. Seems today is the day I finally get a low battery

Anyone here knows a legit repairer of P S/4? the console isn't coming on again and when I got to arena I was told that it has southbrigde issue

Hi, I have a PS4 big coming on again after just a week of getting it. Engineer says it has a South bridge problem. Any hope?

abiodunbright:
This is another weekend we are here for you again

Dharyhor:
Hello everyone,

My powmr 60A mppt charge controller keeps shutting down when the temperature rises to 60°c. The controller's fan start to work at 45°c and despite augmenting with external fan, the temperature continues to increase till it gets to 60°c when the controller shuts down for like an hour and starts to work again

I initially connected 2 pieces of 530watt jinko panels in series, I reconfigured to parallel, still the same. System is 12v

Kindly help

Thank you

Hi, I use this same PowrMr 60A mppt for my folks at home. I use 2 * 420w panels in series which means I can only get 70A in theory ( 53 - 58A real-world after losses, cloud cover etc) so I'm still in range.

Your panels are too much for the controller at 88A theoritical and > 60A after adjusted for real-world conditions.


I myself have 2*585w panels in series but with an hybrid inverter of 100A capability.

One way out is to sell off the 60A controller and get an 80A-rated one.

If you want, you can also sell the inverter and controller and get an hybrid inverter rated > 80A .
I use Bread, it has 100A mppt and costs around 200k.

The big panels will be beneficial when you want to upgrade to 24v.

I also had 300w panels before and sold them

cutefy:
Thanks.
Please does it support 24 v system

Lol no oo, the 24v version is ₦310k

cutefy:
Please what is the price of the Bread hybrid inverter 1.5kva.

Got it for ₦215k

Lol 48v na long-term goal abeg 🤣🤣. Bassdow is right, fingers are not equal. For a 48v system I will have to add at least 6 585w panels to my existing 2. I be first-born o 😄

Bread 1.5kva + 3.5kwh deriy battery is keeping things ticking for now.

Sold my old tubular setup (Indian inverter, CC and battery) and added ₦150k for that. I figured that's a better way to do it then go all out for 48v when I am ready

dollarnaira:
Use your sense ooo
Your money, your decision.

Little tip:
48v 100ah (4.8kwh) 880k cells only diy route
48v 280ah (13.4kwh) 1.3m cells only diy route
24v 314ah (7.53kwh) 688k cells only diy route.
You see say na just sense plus pocket?

Lool how is this blowing up 😭😭

I've already sorted myself a while ago

fuckboys:
what battery do you have?

Deriy 3.6kwh.

fuckboys:
Omo eh, this bread inverter just deu give me joy. I keep seeing issues everywhere and I've never turned off the inverter or checked my battery level even after 5 months of installation.


Just there doing it's thing and supplying constant electricity 24/7

I got your exact setup early this month and ọmọ!! That inverter is really it.

The battery too

zenith4biz:
Negotiable for where, check the price of valto brand new 3.6kw and adjust your price immediately

lmaoooooooooooooooo i don die

Obnoxious2001:
SMS used to be the original people that sold it. this particular one Na renaming.

I have attached images for SMS

Lol, this controller na glorified pwm (my experience sha). Imagine make you get 1.1kw of panels yet controller dey insist on taking in only 200w max. It got so frustrating I had to even increase charging voltage to 15.3v, just to cross up to 300w. Battery never charges.

For your issue you might try downloading the app and control from there, I've made the APK shareable here : https://drive.google.com/file/d/1r00WuSTO3dgmt_y21eJyBbYILtSbLVTP/view?usp=drivesdk

durodee:
Depends on the amps you are charging with and the load on the 3.5kva inverter. If no load and the battery is being charged with very low amps, then yes.
The pressure on the generator will be :
1) Idle load of the inverter
2) The amps you set on the inverter to charge with.
3) Any other load you connect to the inverter

My experience is that the maximum it might be able to charge with will depend on the age of the engine of the generator.

Thank you

hey guys, is it possible to charge 2 * 200ah batteries using Felicity 3.5kVA inverter with a 2.5kva/2kw generator?

dfkm, the tests are on YouTube to watch FOR FREE .... you can go there and check yourself.

nawa for you oo

bassdow:
Let's hope those TESTers remain honest enough.

Mind you, the outreach wouldn't do much to their market because, how many customers got visibility of such reviews whether Honest or NOT

BigDickProblems:
The thing here is that, did you beat the purpose of buying the “Bifacial panel”? Did you utilize the two faces of the panel? Clearly the answer is “capital NO”.

You had your reasons which came from the seller here like you just admitted, and probably you wanted to know how far with it which is still fine.

You would have helped us a lot more with the figure you got when using the Mono and the new figure you got when you added the Bifacial.

Now I am beginning to believe that this narrative of Bifiacial panels being better bla bla bla,
is as a result of it being cheap and it’s likely what most of the sellers here/ghost sellers here lols, have in stock.


Modified: I’m still on the fence separating both arguments so far and I still haven’t moved.

I couldn't find any mono of the same rating anywhere, my only option was the bifacial so i had to ask. My major goal was to avoid mismatch issues which was why I asked after doing my findings on ChatGPT, I also asked my installer to be double sure.

I didn't buy the panel from Dam5reey.