₦airaland Forum

Welcome, Guest: RegisterLoginWith GoogleTrendingRecentNew

Stats: 3,325,362 members, 8,421,536 topics. Date: Saturday, 06 June 2026 at 03:34 PM

Toggle theme

Dbshaywhy's Posts

Nairaland ForumDbshaywhy's ProfileDbshaywhy's Posts

1 2 3 4 5 6 7 8 9 (of 9 pages)

PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 4:32pm On Nov 22, 2020
Beframia:
Going by my experience last week where a portion of my living room PVC ceiling collapsed, I'm not going to advise you use a PVC if the building is yours. Except it's a temporary measure pending when you can afford a better alternative like a POP or the like.
Wait... Is all this 4by4 Nigerite ceiling not gud ni.
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 8:12am On Nov 04, 2020
DancingSkeleton:
How much would it cost to roof a building of 3 bedroom apartment and 2 self contain using this same material? A rough estimate would be nice
Waw... We are both avin same building structure.. Mine too is at roofing level... Kindly let me know how you later work tins out.
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 9:04pm On Nov 01, 2020
Good evening professional in the... Happy Sunday and Happy New month too...

Just want to inform you all that I have a Ford transit bus(long chassis) available for haulage... Am base in Sagamu, Ogun State, Nigeria.

Thanks in anticipation as I expect your patronage.
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 10:02pm On Jun 26, 2020
Good evening professionals, I contact planks seller for my roofing wood and she made mention of this
"akun,
agberigbe,
itara"
Which of this are best for slate roofing and the likely prices for
2by2
2by3
2by4
3by4 and
Facing board?
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 6:14am On Jun 15, 2020
Person2person:
skin door and HDF door
Price sir?
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 12:31pm On Jun 14, 2020
Adequate459:
Please be reminded
Got mine #215,000 in the month of April
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 12:21pm On May 22, 2020
dbshaywhy:
Good morning professionals and Ramadan Kareem too to all Muslims in the house...
Am much grateful for your contribution towards towards successful completion of my site to roofing stage, am glad I all have a beautiful virtual brothers and sisters here in the house,thanks so much.

Now, am about to roof and ceil my simple "A unit 3 bedroom flat and 2 units room and parlour self contained"... The quotation given to me by the carpenter is really much, right from materials down to workmanship(Grand Total =#1,749,000) ... Please I Need your utmost advice and assistance.

And more so, what's the experience from getting the planks through those timber cutters operator, rather than getting it at sawmill?
Here is the picture of the building with a dimensions of 77ft by 24ft.

PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 5:09am On May 22, 2020
Good morning professionals and Ramadan Kareem too to all Muslims in the house...
Am much grateful for your contribution towards towards successful completion of my site to roofing stage, am glad I all have a beautiful virtual brothers and sisters here in the house,thanks so much.

Now, am about to roof and ceil my simple "A unit 3 bedroom flat and 2 units room and parlour self contained"... The quotation given to me by the carpenter is really much, right from materials down to workmanship(Grand Total =#1,749,000) ... Please I Need your utmost advice and assistance.

And more so, what's the experience from getting the planks through those timber cutters operator, rather than getting it at sawmill?

PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 5:21am On May 03, 2020
twinskenny:
worker got injured on your site? then you should be able to take care of him
Ok, thanks, just want to know my responsibility
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 11:26am On May 02, 2020
Good morning professionals, please if workers at one site fall off bricks and got slump but recovered at medical intervention... Please who is to be responsible for the the medical bills or how should it be sorted out?
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 3:54pm On Apr 21, 2020
saydfact:
Morning GoodFaith,
If am not mistaken, he said the carpenter is bringing his own wood.... And he's also doing an all round lintel plus about 7 columns for 50k...



Morning dbshaywhy,
Be fair to the carpenter, he'll pay to transport the wood to site and pay to pack it. You're not buying wood and yet he wld pay his workmanship.

That price is fair.... Whether it is 50k or 65k...

Maybe you should start by calculating how much wood he wld use.

Goodluck.
Thanks you all for your contribution... I actually pay up last price posted and am happy a gud job was delivered
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 11:54am On Apr 16, 2020
bobkezel:
Depending on location, but what they normally charge is 500 per opening.
So count how many openings you have and multiply by 500.
By opening I mean doors and windows.
Then they charge 1k for varendah and dining lintels.
Let this be ur guide.
Thanks bro, it's actually a round beam and d total area to b covered is 299ft and 7 pillars... Though we priced it n d carpenter is requiring 65k last ń iron bender 20k(to bend 37 lengths of 12mm)... Hope its all still fair.
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 5:09pm On Apr 14, 2020
Hargbo:
12mm iron rod - 125k
10tonnes of granite 50k

But transport is quite expensive o

They can make the delivery on Wednesday from Abeokuta if you are ready.

Don't you have a plug in Sagamu
Thanks I've been able to seen who to do dt granite... Buh nt yet seen dt of iron rod, d only person I know has lock down
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 5:03pm On Apr 14, 2020
Urgent response needed
A carpenter went to inspect my 1 unit 3 bedroom flat and 2 units room and parlour self contained so as to gv his bill for the lintel work. So he eventually charged 100k(will bring planks himself)... That a 3 bedroom flat is been charged 50k...please house is ds nt on d high side?
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 4:43pm On Apr 13, 2020
Good day house... Urgently needed.
I need Sum1 to supply me original half ton of 12mm iron rod in sagamu(ogun state) ASAP and 10 tonnes of granite.
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 9:23pm On Apr 01, 2020
Good evening builders and engineers in the house... Please will 12mm iron be good for column and casting 2,000 ltrs water tank to be embedded into the roof?

And more so

I need the current price of;
1 ton of 12mm iron rod
7 by 7 ring and
roll of binding wire.
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 10:22am On Apr 01, 2020
Good morning professionals, please what's the price of 1 ton of 12mm iron rod and 10 tonnes granite to Sagamu?
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 9:18pm On Feb 05, 2020
Chekitaut:
Lagos Island, Ikoyi, V.I, Lekki, Ajah

Buy 60tons Granite @ *N165,000/30tons and get 15tons free, while you pay just N55,000 for the haulage only.

Offer last till Feb 29rd 2020
Payment on Sight (PoS)

NB. *Ado to Badore attract additional N5,000/30tons

... building made easy
BEYOND IMAGINATION.
Sagamu location nkọ
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 9:10pm On Feb 05, 2020
ak22:
DPC is normally a course in masonry that acts as a barrier between moisture from foundation to travel up in the walls. ... A damp proof course is a membrane inserted in the wall of a building to prevent moisture from rising above it. ... Can I use dpm (damp proof membrane) instead of dpc
Thanks very much
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 3:55pm On Feb 03, 2020
ak22:
Lack of DPM
Full meaning of DPM please?
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 7:00pm On Feb 02, 2020
Happy Sunday to all NAIRALANDERs
To the builders and Engineers in the house, what could be the causes of the walls peeling above the tiles in the below picture.

PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 11:15am On Jan 31, 2020
Good morning to all beautiful heart Nairalanders and a big thanks to your quick response. 
At some responses, some are asking for building plan/sketch or design but the fact is I only bought that property like that tru my uncle. It's an half plot of land, 30 by 100 with 3 bedroom and 2 unit of room and parlour self contained foundation with each rooms with its toilets and bathrooms, no dining room. The former owner almost used up all d land. The left over at the left and sides wil not b more than 3-4ft and 4-5ft respectively and the back side 3-4ft too.
A good hearted one could further assist me please.

I think I finally comes with a sketch.
Mind you, the dotted point will be for pillars and I wish the sitting room could step down, will this still be achieve by doing the oversite concrete?

PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 10:34am On Jan 31, 2020
dbshaywhy:
Good day friends, here is a 3 bedroom flat and 2 room and parlour self contained foundation as shown in the picture.
Filling is on going presently, next after that is the setting of the blocks to the final level.
My enquires are;
How many blocks will it required?
How many bag of cement and cost of sand (mind you, there will be 15 pillars)?
Can it later be floored after block setting, mind you, am using 9 inches block all through?
Thanks in anticipation.
Good morning to all beautiful heart Nairalanders and a big thanks to your quick response.
At some responses, some are asking for building plan/sketch or design but the fact is I only bought that property like that tru my uncle. It's an half plot of land, 30 by 100 with 3 bedroom and 2 unit of room and parlour self contained foundation with each rooms with its toilets and bathrooms, no dining room. The former owner almost used up all d land. The left over at the left and sides wil not b more than 3-4ft and 4-5ft respectively and the back side 3-4ft too.
A good hearted one could further assist me please.
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 9:00am On Jan 31, 2020
Charisdesigns:
It is better to get things done properly now that you are still in this stage....

Doing your German floor now will save you from lot of headache later

From experience here are some advantages we have noticed German flooring have over normal flooring

1) German floor is also part of the foundation, it should be seen as a structural elements that makes your house to stand. Loads transmitted from the building is recieved by the German floor before transferring to the foundation

2)German floor stops the upward movements of water from the soil into your building. I am sure you wouldn't want your walls to be damp or see algae grow on it.

Lastly, oversite concrete can Serve as a breaking point when there is a non major crack to the wall, it prevents this crackline from getting to the foundation.

About the cost estimate, you will have to provide the plan as that will serve as basis for the estimation

CharisDESIGNS
Waw, this your reasons made me have a total change of mind of doing the oversite concrete.
Can you please dm me ur whatapp contact to discuss better.
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 7:09pm On Jan 30, 2020
boay:
It is better you do oversite concrete that people call German floor.


Do you have the drawings? Or can you get a sketch?

I can give you the material estimate
Can I get a rough estimation of the oversite concrete and even assist with the sketching of the building if have any (3 bedroom flat and 2 room and parlour self with each room avin it's toilets, no dining room) ?
PropertiesRe: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m):
Good day friends, here is a 3 bedroom flat and 2 room and parlour self contained foundation as shown in the picture.
Filling is on going presently, next after that is the setting of the blocks to the final level.
My enquires are;
How many blocks will it required?
How many bag of cement and cost of sand (mind you, there will be 15 pillars)?
Can it later be floored after block setting, mind you, am using 9 inches block all through?


At some responses, some are asking for building plan/sketch or design but the fact is I only bought that property like that tru my uncle. It's an half plot of land, 30 by 100 with 3 bedroom and 2 unit of room and parlour self contained foundation with each rooms with its toilets and bathrooms, no dining room. The former owner almost used up all d land. The left over at the left and sides wil not b more than 3-4ft and 4-5ft respectively and the back side 3-4ft too.
A good hearted one could further assist me please.


Thanks in anticipation.

Jobs/VacanciesRe: Federal Road Safety Commission 2018 Recruitment: How To Apply by dbshaywhy(m): 10:42pm On Sep 21, 2018
Good guys, congratulations to us all, please I need screening centre, hnd inspector cadre officer for those that choose ogun state as place of screening.��������������
Jobs/VacanciesRe: Federal Fire Service 2018 Recruitment: How To Apply by dbshaywhy(m): 12:33pm On Jul 01, 2018
omo17:
I have d one sent by oyeezah
I need one
aderemibello@yahoo.com
Jobs/VacanciesRe: Federal Fire Service 2018 Recruitment: How To Apply by dbshaywhy(m): 9:22pm On Jun 30, 2018
Please help a brother, I need too oooo
aderemibello@yahoo.com
Jobs/VacanciesRe: Federal Road Safety Commission 2018 Recruitment: How To Apply by dbshaywhy(m): 8:26pm On Jun 25, 2018
For those interested in the frsc 2016 computer based exam past and answers, contact me via 07061049999(whatapp inclusive).
Below is an attached screenshot.
Thanks

Jobs/VacanciesRe: Federal Fire Service 2018 Recruitment: How To Apply by dbshaywhy(m): 6:30am On Jun 17, 2018
tintingz:
Have you been called?
No
Jobs/VacanciesRe: Federal Fire Service 2018 Recruitment: How To Apply by dbshaywhy(m): 9:18am On Jun 14, 2018
Abeg, help a brother, I need the federal fire service past questions too and answers, kindlt help to forward to aderemibello@yahoo.com.
Thanks.
Love you all.

1 2 3 4 5 6 7 8 9 (of 9 pages)