₦airaland Forum

Samueltemi337:
The thing is that I am a newbie in the satellite stuff


I gave the installer 25k and he got the strong stg9000a decoder

25k just for that decoder only?

sam2kenny:
I need apollo5 code the one that came with my mediastar decoder has expired

It's being sold you can look for a dealer that sells

Louislouis:
i need help my friend need a channel that shows porn wth small dish and 4955b decoder

Track 16e and buy a cccam that can decrypt it

iamsuskay:
It accept more than two

Buy diseqc and lnbs and attach more sats

Samueltemi337:
Is strong stg9000a a good decoder?

It's better you buy a decoder you can easily get support for

bbally:
please, what is the work of this scam account and what satellite does it work on.

Most European birds, asiasat, zap, etc

iamsuskay:
please What can I do to make more stations to show becox my friend which I bought the TV from he was watching plenty STATIONS but his leaving in Lagos and I was leaving in ilorin Kwara state.. GURUS I SALUTE YOU.. PLEASE AND PLEASE COME AND HELP ME

If the TV supports diseqc you can attach more satellite thereby having more channels.

iamsuskay:
hello gurus in the house please assist me in connection to satellite TV for Philips smart TV 42PFL6188S/12 . the guy way help me with the connection no try at all. na only MBC action, MBC 2, Al-Jazeera, dwtv and &flix action but some channels showing black with sounds and some without sounds.. please help me

That's 51.5e, your satellite TV isn't h.265 compliant that's why you experience that. To get the best experience it's better you buy a standalone decoder.

Rickyzagy:
I need h265 compliance decoder that is fully auto biss and powervu and with account.
That Is affordable between 15k to 25k and where to buy it. I stay in abia state

Just go for tiger, mediastar with forever or hellobox with scam+

Xmen149:
one more question baba.

will any of the two procedures remove the channel lists on the decoder (therefor need to re-scan all the satellites again using their TP)

Yh it will just save your current user db first before going through the process

cabes007:
What is the procedure to upgraded the SOFTCAM.KEY bro sir
I have tired it but it not working

Go to key edit, then import it. Make sure it is saved in the root directory of the flash

lateefykn84:
for now 90cm but I'm plan to upgrade to 2.8m to 3m

Buy forever enabled STB like octopus 4k, Tiger T3000 Z280+ I400PRO Z400PRO Z4000
Or orca enabled STB like icone iron pro
If you in SW Nigeria it's better u go for a 4.5m fibre dish to enjoy the device

lateefykn84:
please guy's what best decoder to buy with best options I don't mind any amount

What dish size do you have

Xmen149:
IS IT AFTER THIS THEN ANOTHER PROCESS FOR SOFTCAM.KEY

You can use either process, they are two separate procedure

Spy360:
Thanks. How do I flash please? Should I install in flash drive and upload to decoder?

Copy what you downloaded in the root directory of flash drive, go to 'usb update' and select user dB, the .bin file you downloaded will show then select 'start'

Spy360:
I have done so and even tried entering key but no success.

You can also import the softcam key I uploaded. During live match, factory reset and rescan, it will open. Then you can backup the user database so you don't have to factory reset all the time.

Spy360:
I have done so and even tried entering key but no success.

https://mega.nz/file/W9omUKwZ#qAgl9HCujfL8kzr0Eoem2bADoeA_h7FGyKZBnBReVc8
That's user settings. Download and flash it
Select 'user' when you want to flash.

Spy360:
Please can you direct me on how to put biss on this decoder? Thanks.

Press 9878 to enable patch

ipobWARLORD:
What's you advice for me, should I go for csat c8 pro or this csat 2200hd. Which one should I go for

Csat c8 pro+

HIGHESTPOPORI:
Are they back? Thought it is red

It goes off and on

Michaelondon53:
Hello house members, do I need to activate biss key for idman TV for me to watch during live matches? Because it comes up sometimes during live matches and most times it just appears blank. I use a mediastar 2727. If yes, how do I go about it? I meant how do I go to the biss key page and how do I Input the keys and also how do I activate it.. Kindly give me step by step guide for mediastar decoder. Thanks, Awaiting your kind response .

#michaelondon53

Press F1 147 to patch menu or menu >>> installation >>> patch menu.
Then move arrow right to BISS, move arrow down to idman my own is on 120.
Then press F1. Enter idman frequency and symbol rate and number on your TV.
Like this 11555 : 30000 H 0002 and press OK.

Unluckrees:
Yes but it's encrypted. I dey find free one to install for a client.

Since u can't find a free one then use cccam

Hotnholy:
I've downloaded sir.
I ve copied to flash. But I can't update.
Please is there a process I am not getting right.
Thanks in anticipation.

You have to extract it first so it has an extension .bin and it should be copied in the root directory of the usb

Unluckrees:
I tracked and scanned Nilesat (11560 H 27500) on 7•W but I didn't see KBS among the channels there.

I think there's a KBS world on mytv

Hotnholy:
F1+0000 activated the patch menu. I ve imputed and saved the biss key. But the channel cracks terribly bad. How do I go about updating the decorder because the software running is 2017. Thanks

You can download from this site
https://www.tiger-site.com/software/
The latest software is September, 2020

Hotnholy:
Didn't work. Below is the info page

The chipset isn't started, you'll have to unscrew it and snap the board. Nonetheless, you can try F1+0000

Hotnholy:
Thanks for your reply. But I didn't see the patch under installation or on any sub menu under menu. What can actually be the challenge?

That means you have to enable the patch. Try pressing menu, then 1506. If that doesn't work snap the info page.

ludakristos:
I have checked, no such option.

Kindly snap the menu and submenu lemme see it

ludakristos:
After inserting the flash and pressing the standby button. It goes to "Load' then "fail'

What is the procedure to make a copy from the other decoder?

There should be an option for usb backup in the menu

ludakristos:
Morning boss! I followed these instructions and but its still failing to install. I don't know what could be the problem. I have a friend who uses the same decoder. Is there a way I can copy the software from the decoder?

Yes, tell him to make backup and share with you. Moreover what was the response u got when it failed

ludakristos:
Its asking for a decryption key. Meanwhile, I was able to extract the bin file from the previous one using android simplerar app. But it still couldn't run on the decoder. it returned a "fail" query.

Did you follow the procedure correctly
HOW TO REVIVE A BRICKED ALPHABOX x6+ HD COMBO\ STRONGEST STG90000 HD

USB Boot On MENU:
Change bin file name to Gx6605s_all.bin and copy the file to the root of usb drive

USB聽drive聽must be a聽FAT32 file format. Both STBs don't support NTFS聽format.

Do聽not聽change聽the file name. If different,聽USB聽Boot聽will not聽work.

Attach聽the聽USB聽device聽to
the聽STB聽.

Turn聽on the STB mains power while pressing Standby聽 key聽on聽the front panel.

Keep聽pressing聽the Standby key until "E0xx" appears on the front panel LED display followed by聽"P0xx".

For a successful update DO NOT release the Standby Key until "OK" appears on the front panel LED display

Update聽finish now release the Standby Key & press it again to ON the STB which should reboot automatically

ludakristos:
I used winrar. Could it b that the file is corrupted ?

https://mega.nz/file/utAGlBwC#1KGiJGCFuUREwUq7J9EXpjaEWTvgTKObRD0hmvLG-IA
Use this