LauraClasikVibe:

Sol
Matic
Xrp
FIL
Enj
Xvs
Klv
Dodo
Tlm
ATM

LauraClasikVibe:
emilex1000

jedisco:


Against betece, most don't look strong... Even in usd, a good number are below weekly support... That's to expexted as betece is also below its weekly support....

But generally, if an alyt isn't looking strong against betece, I'm better off holding betece...
If betece starts retracing to say 35k, most will crumble

Tenses:
Company's Name: MIKOGO FOODS

Specialization: Production, Processing and Packaging of the #Unique Abakaliki rice.

Our rice products are Stone free, polished, long and medium grains.

Location: No.18, Ricemill, Abakaliki, Ebonyi state

Contact Number: 08081905662

Gptech:

That's the total time 'in hours' you have used the generator. Use it for like 2 hours, you'll see the number will increase by 2. This is where to look at when calculating when to change oil.

Gptech:

I have always wondered what the 'A' in the first picture stands for. What quickly comes to mind is current, but I really doubt that.
The last picture indicates the voltage supply.

Gptech:

If the frequency is too high it means the gen will run at a higher speed and also make more noise and consume more fuel, check and ensure its not above 52.5HZ. There's a very tiny round button just below the display, press it to change its display between Voltage, frequency and time.
You shouldn't wait for the oil to be dark before changing it, that's one useful advantage of the VTF display, the total time you have used the generator is displayed there just like car mileage. I will advise you change oil after every 60 hours of use. If the time displayed as at when you are changing the oil is say 276.8, it means you should change the oil again when it's displaying 336.8 ( that's 276.2+60), I hope you understand this long epistle?
Note : the display is set at voltage by default, should be 230.

Gptech:

If the frequency is too high it means the gen will run at a higher speed and also make more noise and consume more fuel, check and ensure its not above 52.5HZ. There's a very tiny round button just below the display, press it to change its display between Voltage, frequency and time.
You shouldn't wait for the oil to be dark before changing it, that's one useful advantage of the VTF display, the total time you have used the generator is displayed there just like car mileage. I will advise you change oil after every 60 hours of use. If the time displayed as at when you are changing the oil is say 276.8, it means you should change the oil again when it's displaying 336.8 ( that's 276.2+60), I hope you understand this long epistle?
Note : the display is set at voltage by default, should be 230.

TrebleChamp:
The push to start button can be replaced by a good technician. Better still go to any thermocool store around you and tell them the fault, am sure their experienced engineers would no what to do about the loud noise and drop in current. Pls avoid those inexperience "i pass my neighbour" gen repairers, good luck sir...

Gptech:

How often do you change your oil, and what's the last time you changed the oil? What's the frequency of the gen when it's on? You can check the VTF display for the frequency. Using a toaster with all those load is too stressful for your gen. A 2 slice toaster alone is around 1000W.

TrebleChamp:
Ok i get it, how long do you run the gen daily since last year? How often do you change oil? Is it shorting oil and consuming more fuel than before? This questions will also help you understand where the problem lies and the posibble solution. And yes you may need to take it to an experience technician or service center if the gen isn't working uptimally....

TrebleChamp:
1.5hp inverter, a fridge, an AC and a toaster, TV and other appliance not mentioned all running at the same time on a 3.5kva gen? The gen sef try sey it work reach now, those load are too much on your gen sir. Try switching off your AC when charging your inverter and manage the load on it efficiently....

Ayrastarr:


Ermm.

How do I reach you?

Can you drop your contact on a Dead thread or something?

Ayrastarr:


No distributors in any African country.


Maybe you can become their first African distributor

Ayrastarr:


You can actually order and use GIGL from USA.

I even got in touch with the manufacturers of those T-shirt and they told me to use their Distributors.

I want to order soon for samples because the hype on those T-shirt are too much.

I really want to see what it is all about.

If you're interested, I can send you the link.

Ayrastarr:


You can actually order and use GIGL from USA.

I even got in touch with the manufacturers of those T-shirt and they told me to use their Distributors.

I want to order soon for samples because the hype on those T-shirt are too much.

I really want to see what it is all about.

If you're interested, I can send you the link.

Ayrastarr:


You can actually order and use GIGL from USA.

I even got in touch with the manufacturers of those T-shirt and they told me to use their Distributors.

I want to order soon for samples because the hype on those T-shirt are too much.

I really want to see what it is all about.

If you're interested, I can send you the link.

Ayrastarr:


You can actually order and use GIGL from USA.

I even got in touch with the manufacturers of those T-shirt and they told me to use their Distributors.

I want to order soon for samples because the hype on those T-shirt are too much.

I really want to see what it is all about.

If you're interested, I can send you the link.

Ayrastarr:


You can actually order and use GIGL from USA.

I even got in touch with the manufacturers of those T-shirt and they told me to use their Distributors.

I want to order soon for samples because the hype on those T-shirt are too much.

I really want to see what it is all about.

If you're interested, I can send you the link.

Ayrastarr:


Hello there!

Did you end up ordering these t-shirts?

How was the quality?

Thank you!

Are you tired of issuing cheques/ISPO or being stood up by incompetent facilitators at the bank?

Are you not comfortable with sellers procedure that offers little or no security for your funds?

Do you prefer to meet with the seller one-on-one or have a face-to-face transaction?

�% guaranteed inflow to any Bank in Nigeria @360/5 or 358/4

simple procedure
- buyer meets with seller at sellers office
- Seller transfer USD into buyers account
- buyer credit seller with Naira equivalent.
- facilitators are paid immediately.
- the end!

NB:
- Seller has account in all Nigeria bank except for Skye bank.
- Sellers Side is closed and buyers side is open
- minimum volume is 1M
- No long chains pls.

Cassie74:
..

His WhatsApp works now if you're patient

BizBloke:


I'm sorry, Emilex1000. Let me get the quote for you by tomorrow evening or Monday morning tops, please.

DukeLad:
2