₦airaland Forum

BarrElChapo:
Please I follow you cos you seem to have a knack for high quality products. Do you intend to use solar energy in your house ? If yes how would you advise one goes about getting the materials or what products to get. Thank you

Stock2233:
I bought a solar panel but I noticed when I use it on my starlink I hear some news coming from my starlink router like it about to blow off. I usually off the router so it don’t burn off because of the noise. Please can anybody know why the sound is coming out from the router

ibietela2:
Where did you buy the ecoflow?

Ayodupe:
Hope LG will not abuse this autonomy

Billions123:
Most seasoned Interior designers can take over from any stage you want them to.

The difference is that they will inflate the prices since they are outsourcing all the jobs and want to make profit from all, so you will pay more depending on what you want them to handle.

For cost effectiveness, do as much as you can yourself, let them come and add finishing touches.

jboixxx:
[color=#0000ff]What error message? Share screenshot . [/color]

Jokay07:
Politics is local. If you know, you know.
Fubara is trying to get grassroot support. But does it bother Wike?
Hell no.

Wike is not bothered

ibietela2:
Is it still available?

ibietela2:
The ethernet adapter is the one for external router right?

xtremeidea:
I need it but I'm n Lagos. Can get it off you end of the month at a slight discounted fee if it's still available, but transportation would be a big problem. let's chat on whatsapp and discuss terms

Bluntemperor:
But is there any Truth in what the man said in the Video ' that Status- qou should be mained,by the Appeal Court'
Please,tell us what the Appeal Court said - without bias?
For it's Not everything is Politics - just the Truth!
For if the Appeal Court says so,then,so be it!

ruggedtimi:
Omuma wey be wike stronghold...but which kind phone dem use take pic

PotatoSalad:
You might have need for it in the future.
For me, Starlink router is just bland af. Throw in a powerful third party router and have full control, stronger signals and increased range.

FreeStuffsNG:
Congratulations Madam President. Here's wishing you all the best. Please serve excellently.

Las las, UNICAL will still set JAMB admission cut off mark at a ridiculously disgraceful 140 out of 400 (35% admission pass) and accept 5'O level passes from combined two sittings results in its 49 years of mediocre admission standard. Smh.
Same mediocrity prevails at UNIUYO too with 140 cut off and 2 sittings O level!

Serious organizations know how 35% score can get you admitted into your school so don't be shocked when they don't hire products from schools like this in Nigeria.

It is no surprise that UNICAL undergraduates are failing massively. The university is culpable by lowering admission requirements to the most ridiculously low and mediocre level that should make every serious employer not to take any product of UNICAL serious.

The University of Calabar has been admitting failed JAMB candidates yet the federal Government keeps subsidising such mediocrity.

It's completely unacceptable to have any Federal Government funded school to be admitting students who fail JAMB. It's ridiculous. The Federal Ministry of Education should stop this mediocrity. 35% is not a pass mark!

May God bless Nigeria for ever! Check my signature for free stuffs!

afterseun:
Call me on or email pexlimited@yahoo.com for more on Zain, Mtn, Glo gpass and other configurations

FreeStuffsNG:
“This is an emergency and it has to be handled with speed. The lives of more than 60,000 Muslim pilgrims are in danger and the Federal government must move to save them.


It beggars belief that nobody in the top echelon of the partisan Labour unions considered this category of Nigerians. This is because the heads of the two unions are Non-Muslims and they had poor consultations across the spectrum.
This is why most people understand that there is a deliberate act to play politics with this strike. It will be unfortunate if this kind of sabotage is allowed to be repeated.

All the enemies of Nigeria will lose las las. They always lose. May God bless Nigeria for ever! Check my signature for free stuffs!

lonelydora:
It's surprising Nigerian Maritime workers earn this poor. How can a captain earn 1.5m to 2m per month? This is the salary my company pay graduate trainee engineers that just came out of training center. Na wa o.

But my guy that works in Bonny Transport, a subsidiary of NLNG, lives large. I think he earns well.

Also I never knew BOSUN is not a high level position.

Obnoxious2001:
Sir I saw your post on another thread (marine engineer was mentioned so it diverted my attention)
I just finished my B.Eng in marine engineering, am looking forward to getting into the marine sector.

I will appreciate your guidance sir ( I don't have any papers yet am a total newbie)

I will be patiently waiting for your response

diordaves:
The fibre board are of standard size. To save cost, decide what you want from the beginning - POP or Fibre board. When you are doing your roof wood work, tell the carpenter to nog for POP or Fibre.

There must be in Awkward Ibom.

diordaves:
1. Does it have the same nogging as POP?
No. A 6mm fibre cement board (N13,300) will be about 1.24mm x 2.44mm in size. So the size of the board will determine your nogging. So you have to decide from the beginning what ceiling solution that you want when roofing. The carpenter that will do your roofing wood work SHOULD also do your nogging. You will save a lot by so doing than having the carpenter to only do your roofing wood work. When you now want to do ceiling, you will spend extra more doing the nogging first.

2. Fibre cement come in different sizes.

3. Apart from Nigerite, there are other fibre cement boards imported into Nigeria. There is also Eminite as well.

4. Price?

I'm currently not on ground in Nigeria, so I don't know the current price but see above

topsy23:
Good what we normally have in the kitchen is heat detector

VanuatuWycombe:
It’s good for wall cladding too, both internal and external. That’s what we are using on our current project. Installation is on DIY basis since we have all tools and consumables needed.

No need of screeding again. Just look for good paint sprayer like the one we are using - Wagner HEA Airless Sprayer.
You can also by Gaco/Magnum too, if you have the cash.
There are China-made sprayers too on the market.

topsy23:
Many don't have fire alarm in their house. We have the wireless one now