₦airaland Forum

chiomzylala: My work.

lovely

Continue the procedure till u where able to wrap the cord with the beads.

Bend d wire, twist it to b firm on d cord and wrap little from the remaning wire on the cord

Add two broken beads and a crystal and anoda two broken beads to the wire

Wrap your wire tightly on d cord necklace, make sure it is tight enof.

Materials needed, a cord, broken beads, and 0.5mm wire

Thebeadslady: Weldone ma,pls what do u mean by cord necklace?

am finding it diff to upload pics but I will keep trying.

outstandingjk: How to Stitch Square Openwork Right Angle Weave:

First, determine how large you want each window or cluster to be, and how many beads will be needed for each wall of the RAW units. Pick up four sets of these beads to make the base RAW unit. For this example panel, each unit will have 3 beads per side, so 12 seed beads are needed to start.




Weave through all of the beads again and pull snug to form a circle, then pass through the first three sets of beads. You don’t need a stop bead to work this stitch, but it does help to keep the tail thread secure at the desired length, and provides good tension for the base unit.

Pick up three sets of seed beads (9 for the example stitch), and pass through the previous set of beads in the ring, moving in the same direction as the working thread. Pull snug to form a ring with the new beads, which now shares one ‘wall’ with the previous unit.




Pass through the first two sets of beads just picked up and pull snug. The beadwork should now begin taking on the square shape, which will even out as new rows are added. As you work, try to remember the basic figure-eight motion of right angle weave.

Pick up three new sets of beads, and chase the thread through the previous unit, passing through the shared wall of beads. Pull snug to form the new square. Continue adding units this way until the panel reaches the desired width or number of squares.




To begin the next row, weave through the final unit added to step up, exiting from the top wall. Pick up three sets of beads and add a new cluster as before. Pull snug, and pass through the first set of beads just added.

Pick up two sets of beads, and pass through the top wall of the unit below, in the previous row. This will form a new unit with two walls being shared instead of just one. Pass through the entire square, and through the next set of beads from the previous row to begin the next unit.




Hint: If your base row has an odd number of units, your thread path will move in the opposite direction. Just follow the figure eight pattern, making sure that each new stitch is shared with the last unit added, and the row below. Continue building rows until the panel reaches the desired length.

You can see how the beadwork has a grid-like shape in the center, but rounded edges. To help add structure to the outer walls, simply add seed beads between each set. This will give the outer walls a stronger foundation.



P
Once a bead has been stitched into each set on one side, you can see the difference in shape. If you are working a long panel of square RAW, the beadwork may begin to pucker as you add the foundation beads. To prevent this, weave all the way around every third or fourth unit as you add seed beads. This will anchor the thread so that it doesn’t pull on previous stitches and allow the beadwork to remain flat.




This openwork stitch is great for bracelets, but can also be used to make beaded beads, necklace straps and chokers, and pendants for bib necklaces. It is also really fun to embellish with accent beads or seed beads in a contrasting color.

thanks madam, I wil try it and send pics

onose01: U posted d pix with a simple "HELLO" as d caption.
I think its better to state ur reason 4 posting a pix next time. Its either u want to teach it or u want to be taught. Just my opinion.
Oya oo make sombori come throway light put. Me self need d light.

make una no vex am sorry o

On your cord necklace twist 0.5mm wire strong enough to hold your work at the back close to the hook side. Then add two broken beads and crystal and another two broken beads in the wire, bend it, twist and roll the wire around the cord. Continue this till u get your desired lenght. I will upload pictures

This is wat am teaching.

Am the next lectural and dis is the material needed, a cord necklace, 0.5 or 0.315mm wire. Crystal bead size 6 and traditional beads ( sorry dis bead has another name)

SerenaT: Nice job maam but pls I wana know if the one you just thought is the same as this design?cos I made this a long time ago

please can you do a back up teaching pls.

Consy11: My Goodness! What A Suprise! Pls I Nid The Knowledge Of This Work. If U Wont Mind, Can U Throw Some Shinning Lights. A Customer Brought It And I Declined Cos I Cant Get It, Pls Hlp Me Ma! God Bles U! I Feel, Odas May Nid It Too! @boss Toynex, No Offence Meant! Nice Day All!

I brought it here if I can see any one who know it.

onose01: I dey o my oga. I hv bn on admission 4 typhoid fever but am home now. Wheneva my hand ws free of drip, I usually peep in but cldnt mk any contribution. Thanks 4 checking on me. Am getting better now.

welcome back

Hello

I don't av enof wire but hope u get it with the little wire I use

Then pick two wires again, bend it twist and roll like a coil. Continue till u get ur desired lenth.

Pick two from d oda side,bend it twist and roll like a coil

After u pick two from it, bend and twist then roll down like a coil

This is d second step. After bending den twist it to secure ur hook side.

Pick two from it, bend and twist. Dis is d third step.

Fold dem into equal part

Cut ur wire as long as u want

Cut ur 0.50mm wire. For as long as u want den cut like four more wires the same size with d first one. And fold dem into two equal part. Leave some wire at the back by making a big loop and twist. Then start pick two from each side and twist and roll. Do d same for the oda wires and use to form circle shape. I will upload pics

Am here now, I use 0.5 wire for it

ayabah: pls how do u lay dis

I don't know if I can teach o cos I av always bn shuned in dis group

Or this

TOYNEX: n if she decided to change no query....
.
.
.but madam I guess say u no use ur eye drop when u view that schedule.... Lols
cos
no be she want teach that topic!

who wan teach d fish bone den

Another way to do dis egyptian coils

Oga pls o but na fish bone outstandingjk wan teach bfor nao

cheneracheal: This is my netting bead design... Thanks to the house for this wonderful knowledge....may the Lord bless and keep us. Happy New month

seriously I stil want to learn dis