₦airaland Forum

Taizy machine's TZY-C Chaff Cutter machine is made of thick steel plate and 65 manganese steel knife, which replaces the metal/steel knife used by other manufacturers, which is more durable and sharper than it! The machine is equipped with long, empty and short three-speed, adjustable weed length. This Chaff Cutter machine can not only cut the forage, but also crush the grain.
The Chaff Cutter machine is used for chopping all kinds of forages such as green, hay, cereal, straw, wild grass, wheat straw, corn stover, etc. It is a widely used economical weeding equipment, which is small in size and light in weight. Installation, operation, easy maintenance, high production efficiency and so on. Production for feeding cattle, horses, sheep, pigs and other livestock forage and manure, straw returning. Main use: Feed the grass into a small section of 1 to 2 cm to feed cattle, sheep, geese, fish or make green storage. Can process a variety of forage and straw, wet and dry.
The Chaff Cutter machine is mainly composed of a body, a grass roller, a knife holder assembly, a blade, a feeding device, and a frame.

This weeding and smashing machine mainly has a frame part, a roller part, a grass feeding part and an overload protection device, and has a simple structure.
Main performance characteristics:
First, the mechanism is compact, small in size, light in weight and convenient to move.
Second, the two rollers can automatically "eat", reduce the labor intensity when discharging, and improve efficiency.
Three or four blades are made of 65 manganese steel knives. The blade is sharp, and the grass that is pulled out is not only flush, but the breaking rate is high, and the quality of sorghum is good.
Fourth, the machine is equipped with an overload protection device, which can avoid the malfunction of the card machine that occurs when there is too much discharging.
Five, the body is fully mining steel material, durable
Mower range:
Cut green, dry corn stalks, wheat straw, straw, alfalfa and various crop straws and pastures.
Please pay attention to our website for more details.
https://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-3/

Please pay attention to our website for more details:https://www.agriculture-machine.com/combine-harvester/
Email:jerryzhangshuliy@gmail.com

Super Nice Harvester Combine Thresher Machine, please visit our website for more details: http://www.agriculture-machine.com/rice-harvester-combine-thresher-machine/

Friend, if you are interested, please leave your whatsapp and email, please pay attention to our website for more details.

Friend, if you are interested, please leave your whatsapp and email, please pay attention to our website for more details.
https://www.agriculture-machine.com/agricultural-drone-sprayer-in-china/
Email:jerryzhangshuliy@gmail.com

Introduction to corn sheller:
Corn thresher is a mechanical device for threshing corn ears. Corn thresher has the characteristics of high automation, strong safety, easy operation and low energy consumption.
The function of the corn thresher is to thresh the dried corn ears. Mostly axial flow drum type, also has vertical threshing disc type. Because of its high production efficiency, good threshing quality, simple operation, simple structure, sturdy and durable, reliable work and convenient maintenance, it has been popular among farmers for many years.
The corn thresher is mainly composed of a drum, a concave plate, a sieve, a fan, a feeding hopper, a seed skateboard, a spiral guide rod and the like. It uses an axial flow threshing device that feeds the shaft end of the shaft tangentially. The process flow: the corn ear enters the drum through the feeding hopper, and is threshed under the interaction of the high-speed rotary drum and the interaction of the corn ear, the drum and the concave plate. Most of the removed kernels and fine hybrids pass through the concave plate holes, and are cleaned by a fan. Light miscellaneous materials are blown out from the discharge port, and the grain is slipped out of the machine by the grain slide. The cob moves backwards along the axial direction of the drum, and the outlet of the shaft end is discharged outside the machine through the surface of the vibrating screen. Some of the seeds entrained in the cob are leaked through the sieve hole and enter the grain slide to slide out of the machine.
Corn sheller usage precautions
The following should be noted during the use of the corn thresher:
1) Because the working environment of the thresher is very bad, it is necessary to conduct safety operation education for the personnel participating in the operation, so that they can understand the operating procedures and safety common sense, such as the sleeves should be tight, masks and protective glasses should be worn.
2) Before use, it is necessary to carefully check whether the rotating part is flexible and non-collision, whether the adjusting mechanism is normal, and whether the safety facilities are complete and effective; to ensure that there is no debris in the machine, the lubricating parts should be filled with lubricating oil.
3) The working site should be cleaned before starting, and some debris not related to threshing should not be placed; children should be prohibited from playing on the side of the site to avoid accidents.
4) When working, the corn cob should be evenly fed, and the stones, sticks and other hard objects should be prevented from feeding into the machine.
5) The joint of the drive belt should be firm. It is strictly forbidden to pick up the belt when the machine is running or touch any object to the transmission part.
6) The transmission ratio between the supporting power and the thresher should meet the requirements, so as to avoid the personal injury caused by the high speed of the thresher and the vibration, causing damage to the parts or loose fasteners.
7) It is not possible to work continuously for too long. Generally, it should be stopped for inspection, adjustment and lubrication for about 8 hours to prevent friction, heat, or deformation.
When the thresher is powered by a diesel engine, a fire hood should be worn on the exhaust pipe to prevent fire.
9) If the threshing machine fails during the operation, it should be stopped and repaired and adjusted.
If you are interested, please leave your whatsapp and email. For more details, please pay attention to our website.
https://www.agriculture-machine.com/maize-sheller/
Email:jerryzhangshuliy@gmail.com

Small combine harvester operation attention
As a good helper for agricultural production and fortune, agricultural machinery is not only necessary to purchase, good maintenance, but also the correct operation, maintenance and maintenance of machinery.
According to Article 23 of the "Regulations on Responsibility for Repair, Replacement and Return of Agricultural Machinery Products", no mechanical guarantees can be imposed on any mechanical failure caused by personal reasons. To this end, the majority of the operators pay attention to the following four points:
First, carefully read the mechanical instruction manual, master the structure and performance, avoid swallowing the date, self-righteous, can not act as "Bai Shi Tong."
Second, the operating machinery should follow the operating procedures, maintenance should pay attention to methods, should not be too sloppy, can not be fiddled.
Third, the limited function of agricultural machinery, the speed of the load has provisions, should not be "small horse-drawn cart", greed and lost.
Fourth, we must not operate diseased machinery. Once we find that there is something wrong with the machine, we must stop the operation immediately and carry out maintenance and maintenance in time.
Small combine harvester winter maintenance
After harvesting in winter, the mini harvester also completed its one-year mission. When not in use, attention should be paid to the maintenance of small harvesters. Proper maintenance extends the life of the harvester and keeps it in good condition. Small maintenance of winter harvesters need to pay attention to four points:
1. Always wash the outside of the small harvester, especially the parts that are prone to rust. After washing, remember to apply a layer of fresh oil or butter to them;
2. The air intake pipe and the exhaust pipe which are easy to enter the dust are wrapped with a kind of cloth, and the water of the water tank is drained, and the waterproof box is rusted.
3. Remove the battery. Because it is not used for a long time, the battery needs to be replenished and maintained. The circuit section needs to be wrapped to prevent rust.
4. Place the mini harvester in a dry, ventilated place. Do not place small harvesters or other agricultural machinery outside the house, as it will rust easily.
If you are interested, please pay attention to our website:https://www.agriculture-machine.com/combine-harvester/
Email:jerryzhangshuliy@gmail.com

The small combine harvester broke through the bottleneck of rural harvesting that could not enter the harvesting of large harvesters, promoted the mechanization of harvesting operations, shortened the labor cycle, and freed people from heavy physical labor. It is widely used to harvest crops such as wheat, rice, barley, hemp, and beans.
It is replaced with the corresponding tool, fitted with upper and lower pallets and a safety shield. It can also harvest shrubs, pastures, reeds and tea plantation branches and flower beds. The small harvester is equipped with powerful gasoline power, convenient and practical, high efficiency, easy to carry and field work. The gasoline engine has low noise. Quiet and comfortable features. Let people everywhere feel tired when they work for a long time.
Harvest rice, harvest wheat, harvest soybeans, harvest corn, and pile up it! It is used for forest clearing, young forest tending, secondary forest transformation and forest tending and cutting, such as shrubs, weeds, pruning, and cutting small trees. There are some replaceable attachments or equipment on the brush cutter, which can also be used to harvest crops such as rice and wheat, as well as pumping, drilling and drilling, and spraying pesticides. The development of brush cutters is closely related to the development of small power machinery. After the Second World War, the manufacturers of chainsaws in the Federal Republic of Germany, the United States, and Sweden used the drive shafts and cutting working parts as attachments to the chainsaw for mowing and cutting shrubs. On this basis, Japan introduced and developed automatic harvesters.
Small combine harvester features
1. The small harvester has light weight, strong power, beautiful appearance, comfortable operation and low labor intensity.
2. Harvest is clean, laid neatly, can be laid or stacked
3. Adapt to large and small fields and mud fields in plains, hills, terraces, and triangles.
4. Easy to operate and easy to maintain
5. Blade specifications: three teeth, 40 serrated, 60 serrated, 80 serrated.
Please pay attention to our website for more details:https://www.agriculture-machine.com/combine-harvester/
Email:jerryzhangshuliy@gmail.com

Straw baling and wrapping machine is a newly developed machine of our company. It has been proved by long-term use, its performance has reached the level of domestic and foreign products, it is one of the mechanical equipment of animal husbandry, silage can reduce the nutrient content. Loss and improve feed utilization. Generally, the hay nutrients are 20%-30%, sometimes as much as 40%, and the nutrients after silage are only lost 3%-10%, especially for the effective preservation of vitamins. In addition, through silage, many parasites and harmful bacteria carried by raw materials can be eliminated. It has been determined that the nutritional value of the whole column of corn silage produced on the same unit area of cultivated land is 30%-50% higher than the nutritional value of the produced corn kernels plus dry corn stover.
1. The quality of silage and pasture is good: due to the good sealing performance of the stretched film wrapped silage, the quality of anaerobic fermentation environment of lactic acid bacteria is improved, the nutritional value of feed is improved, the smell is aromatic, the crude protein content is high, the crude fiber content is low, and the digestibility is high. The palatability is good, the feeding rate is high, and the livestock utilization rate can reach 100%.
2, no waste mold loss: fluid loss and feeding loss are greatly reduced, the traditional pasture preservation loss can reach 20% -30 &.
3, does not pollute the environment: due to good sealing performance, there is no phenomenon of outflow of liquid juice. Appropriate packaging, small size, high density, easy to transport and commercialization, ensuring the balanced supply and perennial use of modern livestock silage for large, medium and small dairy farms, beef cattle farms, goat farms and farmers.
4, long shelf life: compact sealing, unfamiliar season, sun exposure, rainfall and groundwater level, can be stacked in the open air for more than 2-3 years.
Taizy machine specializes in research and development of agricultural machinery. It has more than ten years of research and development of agricultural machinery. The company is mainly engaged in import and export business with machinery, providing customers with cost-effective products, providing first-class services and effective solutions. The products are sold well in China and more. Exported overseas.
Please pay attention to our website for more details:
https://www.agriculture-machine.com/baling-and-wrapping-machine/
Email:jerryzhangshuliy@gmail.com
Please leave your whatsapp and email and we will contact you in time.

Peanut harvesting machine refers to the crop harvesting machine that completes the operations of fruit picking, separating soil, paving, picking, picking fruit, and clearing during the peanut harvesting process. In actual production, it is necessary to select suitable implements according to their own needs and the characteristics of the peanut harvester. It can complete the operations of peanut excavation, soil removal, fruit picking, clearing, fruit collection, etc., with fast transfer speed and safe and reliable use.

For a long time, peanut cultivation, harvesting and processing have mostly been done manually, with high labor intensity and low efficiency. In the whole peanut production process, the labor in the harvesting process accounts for more than 1/3 of the whole process, and the operating cost accounts for more than 50% of the total peanut production cost. It is of practical significance to develop mechanization of peanut harvesting to reduce operating costs, improve operational efficiency, and increase farmers' income.

This harvester is suitable for sandy loam peanuts with a water content of 10% to 18%. During the operation, the digging shovel shovel the peanuts together with the soil. Under the action of the throwing wheel and the dialing wheel, the clods are broken and a part is lost, and then the rods of the three subterranean wheels are continuously thrown. The fine soil and the broken soil are discharged through the circular arc bar sieve. The peanut pods and a small amount of fine roots and fine soil are thrown to the swinging cleaning sieve, and the fine soil is discharged through the sieve hole, and the peanut fruit slides through the sieve surface. Inside the fruit box on both sides.

https://www.agriculture-machine.com/peanut-harvester/
Email:jerryzhangshuliy@gmail.com

If you are interested, please leave your Whatsapp and Email, we will contact you in time.

LORDTAY:
08035388332 whatsapp

Ok, we will contact you as soon as possible.

Alpha2k:
08077779019 WhatsApp

Ok, we will contact you as soon as possible.

Rice transplanter is a planting machine that plantes rice seedlings in paddy fields. The function is to improve the ergonomics and planting quality of the transplanting, to achieve reasonable close planting, and to facilitate the mechanization of subsequent operations.
The working process of the rice transplanter varies from structure to structure, but the basic process is roughly the same. The principle of “group-by-segment division and direct planting” is as follows: the seedlings are placed in the box in a neat state, and the box is moved laterally, so that the picking device successively removes a certain number of seedlings, and controls the transplanting trajectory. Under the action of the organization, the seedlings are inserted into the soil according to the agronomic requirements, and the sputum is taken back to the crate to take the sputum according to a certain trajectory.
The composition of the transplanting parts of the transplanter is basically the same: the human transplanter consists of a box, a splitting mechanism, a frame and a floating body (boat plate), and the self-propelled motorized rice transplanter is also provided with a power drive, a walking device, and a transfer. Seedlings and other parts.
Our company sells two rows of rice transplanters, six rows of rice transplanters, and eight rows of rice transplanters. Different types of rice transplanters can be selected according to different work sites.
If you are interested, please leave your whatsapp and email, we will contact you in time.
https://www.agriculture-machine.com/8-rows-rice-transplanter/
Email:jerryzhangshuliy@gmail.com

sulex11:
Whatsapp: +234 8129525404

Ok, we will contact you as soon as possible.

Introduction to the sprayer:
The sprayer is an abbreviation for a spray device, which is a device that uses a suction function to turn a syrup or other liquid into a mist and uniformly sprays it onto other objects, and is composed of a device for compressing air, a thin tube, a nozzle, and the like. In rural areas, sprayers are an important farm implement that is indispensable for the prevention and control of pests and diseases.
Knapsack sprayer
1. Install the sprayer parts correctly. Check if there is any air leakage in each connection. When using it, install the water test spray first, and then refill the medicine.
2. When using it officially, add water after adding the medicine, and the liquid level of the liquid medicine should not exceed the safe water level line. Before spraying, first move the rocker more than 10 times to raise the air pressure in the barrel to the working pressure. Do not use excessive force when pulling the rocker to avoid explosion of the air chamber.
3. When the liquid is filled for the first time, since the air chamber and the spray bar contain clean water, the concentration of the liquid sprayed during the first 2 to 3 minutes of the spray is low, so it is necessary to pay attention to the spray, so as not to affect the control effect of the pests and diseases.
4. After the work is completed, the residual liquid in the barrel should be poured out in time, and washed with water to dry it. At the same time, check whether there is any water in the air chamber. If there is accumulated water, remove the water joint and release the accumulated water.
5. If the sprayer is not used in a short period of time, the main parts should be cleaned, wiped dry, and stored in a cool dry place. If it is not used for a long time, apply grease to each metal part to prevent rust.
For more information please follow our website:
https://www.agriculture-machine.com/sprayer/
Email:jerryzhangshuliy@gmail.com

Jakumo:
What sort of price range are we talking here ?

Friend, please leave your whatsapp and email and we will send you the details.

https://www.agriculture-machine.com/multifunctional-thresher-for-maize-beans-sorghum-millet/
Email:jerryzhangshuliy@gmail.com

Introduction to combine harvester:
The combine harvester is referred to as the grain combine harvester, which is a combination machine for harvesting crops. It was called Kangbein in the early 1950s. It is capable of harvesting, threshing, separating stems and removing debris from cereal crops at one time. A harvesting machine that directly obtains grain from the field.
Before the emergence of the combine harvester, threshers and mechanical harvesters, which greatly improved agricultural productivity in the 19th century. This makes it possible to harvest more grains with fewer workers than before. But an invention in the late 19th century further improved this efficiency. The combine harvester combines the harvesting and thresher in one piece, allowing farmers to harvest and thresh in a single operation. Thereby saving manpower and material resources, greatly reducing the burden on farmers.
Combine harvester status:
Domestic harvesters started late, and were mainly imitated and imported from the Soviet Union, the United States, and Canada. Many joints or support parts have not been calculated in detail, but are designed and manufactured according to the size of the harvesters that have been built in developed countries, making the harvesters bulky and of high quality.
Large harvesters are very complex mechanical equipment. The use of large harvesters has higher requirements for the leveling and scale of the land. The well-known wheat in the North China Plain, the Sanjiang Plain, and the rice producing areas have long been used in combination production.
Compared to large harvesters, the design of small harvesters is more casual. Many domestic institutions have begun to try to design and manufacture small harvesters. These institutions design small harvesters suitable for local land environments and productivity. These harvesters are low-cost, easy to maintain, easy to use, suitable for all terrains, and have low maintenance requirements. Such harvesters are generally purchased by individuals and are suitable for small-scale production by small farmers.
Combine harvester use:
The grain combine harvester is mainly used for the combined harvesting of wheat crops, and can be cut, threshed, separated and cleaned in one field. When used for segment harvesting, the harvester is loaded with the harvester to pick up the grain strips after drying and to complete the operations of threshing, separation and cleaning. Rice, corn, soybean, millet and elevated grain crops can be harvested when additional attachments (such as soybean low-cutting devices) are added to the grain combine harvester, or with appropriate modifications and adjustments.
Combine harvester for sale:
Combine harvester is the most complex structure in agricultural machinery, with high technology content and strict manufacturing technology requirements. Therefore, the quality requirements for the operation user are also relatively high. Users should be aware of the following during purchase and use, which is beneficial for proper operation of the machine and extended service life.
Taizy is a manufacturer specializing in the development of agricultural machinery. It has more than ten years of agricultural machinery production technology. The combined harvester is low in price and simple to use. It is suitable for all kinds of terrain and has low maintenance requirements and is suitable for small farmers.

If you are interested, please pay attention to our website：https://www.agriculture-machine.com/combine-harvester/
Email:jerryzhangshuliy@gmail.com

K6-10 Agricultural drone sprayer is an economical and practical drone sprayer specially designed and manufactured by our company for farmers with scale of 50000-100000 square meters. Using K6-10 Agricultural drone sprayer spraying operation can effectively reduce operating costs and significantly improve work efficiency. . Compared with the traditional manual spraying operation, the labor intensity of the workers is reduced, and the workers are prevented from inhaling the pesticide particles. The model has been repeatedly rigorously tested and optimized structural design several times, so that the model has the advantages of light, flexible and stable, simple operation, safe and reliable, simple maintenance and low maintenance cost, which is truly affordable and serves the majority of farmers.
Main features of K6-10 Agricultural drone sprayer:
1. The fuselage adopts a closed design to effectively prevent pesticides from entering the flight control system. Provide security for long hours of work.
2, K6-10 Agricultural drone sprayer built-in GPS and compass module, with fixed-point fixed-point flight function, can well maintain the spray height and spray route accuracy;
3. The height limit of the spraying operation and the limitation of the flying speed can be set. The liquid atomizing effect of the high-pressure spraying system is good. Under the wind pressure of the aircraft, the medicine mist has the characteristics of strong penetrability, and the drug particles can reach the stem and the crop. Leaf face

Body design:
The body is made of carbon fiber, which has the characteristics of light weight, high structural strength and corrosion resistance, which can effectively avoid the corrosion caused by pesticide residues on the fuselage. Foldable structure design, small space after folding storage, ordinary van can accommodate multiple Agricultural drone sprayer

https://www.agriculture-machine.com/agricultural-drone-sprayer-in-china/
Email:jerryzhangshuliy@gmail.com

Introduction to corn thresher:
Corn thresher is a mechanical device for threshing corn ears. The corn thresher has the characteristics of high automation, strong safety, simple operation and low energy consumption. The machine is also suitable for threshing crops such as beans, sorghum and millet.
The function of the corn thresher is to thresh corn ears. Because of its high production efficiency, good threshing quality, simple operation, simple structure, sturdy and durable, reliable work and convenient maintenance, it has been popular among farmers for many years.
Corn thresher structure:
The corn thresher is mainly composed of a drum, a concave plate, a sieve, a fan, a feeding hopper, a seed skateboard, a spiral guide rod and the like. It uses an axial flow threshing device that feeds the shaft end of the shaft tangentially. The process flow: the corn ear enters the drum through the feeding hopper, and is threshed under the interaction of the high-speed rotary drum and the interaction of the corn ear, the drum and the concave plate. Most of the removed kernels and fine hybrids pass through the concave plate holes, and are cleaned by a fan. Light miscellaneous materials are blown out from the discharge port, and the grain is slipped out of the machine by the grain slide. The cob moves backwards along the axial direction of the drum, and the outlet of the shaft end is discharged outside the machine through the surface of the vibrating screen. Some of the seeds entrained in the cob are leaked through the sieve hole and enter the seed slide to slide out of the machine.
Corn thresher use notes:
The following should be noted during the use of the corn thresher:
1) Because the working environment of the thresher is very bad, it is necessary to conduct safety operation education for the personnel participating in the operation, so that they can understand the operating procedures and safety common sense, such as the sleeves should be tight, masks and protective glasses should be worn.
2) Before use, it is necessary to carefully check whether the rotating part is flexible and non-collision, whether the adjusting mechanism is normal, and whether the safety facilities are complete and effective; to ensure that there is no debris in the machine, the lubricating parts should be filled with lubricating oil.
3) The working site should be cleaned before starting, and some debris not related to threshing should not be placed; children should be prohibited from playing on the side of the site to avoid accidents.
4) When working, the corn cob should be evenly fed, and the stones, sticks and other hard objects should be prevented from feeding into the machine.
5) The joint of the drive belt should be firm. It is strictly forbidden to pick up the belt when the machine is running or touch any object to the transmission part.
6) The transmission ratio between the supporting power and the thresher should meet the requirements, so as to avoid the personal injury caused by the high speed of the thresher and the vibration, causing damage to the parts or loose fasteners.
7) It is not possible to work continuously for too long. Generally, it should be stopped for inspection, adjustment and lubrication for about 8 hours to prevent friction, heat, or deformation.
When the thresher is powered by a diesel engine, a fire hood should be worn on the exhaust pipe to prevent fire.
9) If the threshing machine fails during the operation, it should be stopped and repaired and adjusted.
https://www.agriculture-machine.com/multifunctional-thresher-for-maize-beans-sorghum-millet/
Email:jerryzhangshuliy@gmail.com

https://www.agriculture-machine.com/combine-harvester/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/rice-harvester-combine-thresher-machine/
Email:jerryzhangshuliy@gmail.com

https://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

Introduction to thresher machine:
The threshing machine is a harvesting machine, which refers to a machine capable of separating crop grains and stems, and mainly refers to a harvesting machine for food crops. The type of thresher is different depending on the grain. The thresher is mainly used for threshing crops such as cereals, wheat, soybeans, sorghum and canola. It is not only easy to operate, but also efficient
The working principle of the thresher:
This machine has a hopper, a drum, a screen, and a shelf.
During work, the crops are fed continuously and evenly. The crop has the friction between the rack and the screen assembly on the drum. Squeeze. Collision. Jitter separates the grain from the stem from the falling rod. The screen flows out. The stem has a roller. Throw out by centrifugation. Complete threshing.
Safe use of thresher:
The machine should be tested before use. The test operation should be free of rubbing, abnormal sound and vibration. The drum should be turned correctly. It is forbidden to overspeed.
Before starting the machine, a signal should be given to confirm that there is no one next to the machine to start.
It is strictly forbidden to drink, pregnant women, minors or people who are not familiar with the performance of this machine. If you are familiar with the operation of this machine, you should tighten the cuffs. Women who wear long hair should wear protective caps.
It is strictly forbidden to reach into the feeding port, the grass drain, and other dangerous operating parts during operation.
It is strictly forbidden to stand at the front of the grass and the mouth of the shovel. It is strictly forbidden to feed stones, wooden blocks, metal and other hard objects into the machine during the operation.
If the operation is blocked or other abnormalities, it should be stopped immediately, and the power can be cleaned up after the power is cut off. When feeding the material, it must be unpacked and evenly fed, which can improve the working efficiency and working performance of the machine. To ensure the integrity of the machine and ensure personal safety, it is strictly forbidden to feed the whole bundle.
Please contact us if you are interested
Name rice, wheat, beans,sorghum,rapeseed,sesame thresher
Capacity Rice ,wheat , rape: 700-800kg/h, soybean :1000kg/h , sesame :100kg/h
Hulling rate More than 98%
Broken rate Less than 0.5 %
Power 4-5kw motor or 6-8hp diesel engine
Drum speed 820r/min
fan speed 2450r/min
Lost rate Less than 1.5%
Dimension 1650*1000*1450mm

https://www.agriculture-machine.com/multifunctional-thresher-machine/
Email：jerryzhangshuliy@gmail.com

fayahsoul:
Whatsapp 08077047351

Ok, I have already contacted you through whatsapp.

For details, please pay attention to:https://www.agriculture-machine.com/agricultural-drone-sprayer-in-china/
Email:jerryzhangshuliy@gmail.com

The combine harvester, also known as the grain combine harvester, is a combined machine for harvesting crops. It was called Kangbein in the early 1950s and is capable of harvesting, threshing, separating stems and removing debris from cereal crops at one time. A harvesting machine that directly obtains grain from the field.
Combine harvester use:
The grain combine harvester is mainly used for the combined harvesting of wheat crops, and can be cut, threshed, separated and cleaned in one field. When used for segment harvesting, the harvester is loaded with the harvester to pick up the grain strips after drying and to complete the operations of threshing, separation and cleaning. Grain crops such as rice, corn, soybeans, millet and overhead can be harvested when additional attachments (such as soybean low-cutting devices) are added to the grain combine harvester, or after appropriate modifications and adjustments.
Combine harvester Operation points
Straight
When the harvester is working, the agricultural operator should operate the harvester in a straight line, so that the work efficiency can be improved and the rice waste in the harvester operation can be reduced.
Forward speed
According to the growth of rice, the yield, the degree of dryness and wetness, and the dryness of the paddy field, the forward speed of the harvester operation is controlled, and the harvester is operated as full as possible to improve the work efficiency. If the rice grows well and the yield is high, the harvester can work at a slower rate. If the rice fields are hard and dry, the work speed can be faster when harvesting.
If you are interested, please pay attention to our website: https://www.agriculture-machine.com/combine-harvester/
Email:jerryzhangshuliy@gmail.com

1, Agricultural drone sprayer quality:
   Reliable quality, low failure rate, low maintenance cost for one year, and poor quality of the Agricultural drone sprayer, if it fails frequently, not only maintains high cost but also affects flying defense operations.
2, flying defense control hand proficiency:
Unskilled control hands can easily lead to drone bombing and installation accidents. The Taizy controller has high proficiency, and the Agricultural drone sprayer has been flying for more than a year. So far, there have been no major faults and it can provide professional technical guidance to customers.
3. Cost saving:
Compared to manual dosing, with the Agricultural drone sprayer, the farm can save labor costs and pesticide costs, and the farm can buy better services with less money.
Agricultural drone sprayer after-sales service guarantee:
1, plant protection effect is good
2, the work effect is high
3, low operating costs
4, continuous operation ability
5, long load and long battery life
6, stable performance and high reliability
7, easy to operate and easy to transfer
8. Professional training
If you are interested, please pay attention to our website.
https://www.agriculture-machine.com/agricultural-drone-sprayer-in-china/

fayahsoul:
how much does it cost?

Friends, please leave your whatsapp and email, we will send you a detailed quote

Introduction to rice milling machine:
The rice milling machine is mainly composed of a fixed wrench, a tightening nut wrench, a brush, a lower hopper, a grinding wheel, a wire brush and the like. The brown rice is peeled and whitened by the mechanical force of mechanical equipment, and the mechanical equipment used is called rice milling machine.
Milling machine operation method:
1. Place the rice mill on the workbench smoothly and plug in the power plug.
2. Determine the whitening time and adjust the timing knob.
3. Take out the pressure in the hopper, take the brown rice into the feeding hopper, and let it flow into the whitening room. Press the power button to start, then lower the pressure.
4. At the specified time, the rice mill will automatically stop, first remove the hopper and remove the mink. Then insert the hopper, and then take out the pressure, so that the polished rice in the whitening room falls into the hopper, turn the timing knob to 0 position, press the power button to make the grinding wheel idling for a few seconds, so that all the rice in the whitening room is dropped. Then pull out the rice and sift through the sieve to get the measured rice.
Rice mill note:
1. Before entering the falling hopper, brown rice should be checked for metal objects and stones to avoid damage to the grinding wheel.
2. After the whitening is completed, the front rotating block should be pulled out, and the rice sugar in the residual whitening room should be cleaned up so as not to affect the accuracy of the sample.
3, the accuracy of whitening needs to determine the number of samples and whitening time from the varieties of brown rice, the number of low-precision samples is 17-18g, the whitening time is slightly shorter; the number of high-precision samples is 20g, and the whitening time is slightly long.
4. When the machine is used for a long time and the high-moisture brown rice is crushed, when the rice bran bonding wheel affects the whiteness, the wheel can be removed by a wrench, and the powder is brushed with a wire brush, and can be used as it is.

https://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com