₦airaland Forum

Introduction to Chaff Cutter:
Chaff Cutter uses corn stalks, wheat straw, straw and other crops as processing materials to produce feed processing equipment suitable for livestock breeding cattle, sheep, horses and deer feeds by mechanical crushing by smashing and cutting.
How Chaff Cutter works:
The motor is used as the supporting power. The power is transmitted to the main shaft, and the gear at the other end of the main shaft transmits the power of the speed regulation to the pressing grass through the gear box, the universal joint, etc., and when the material to be processed enters between the upper and lower pressing grass, the clamp is pressed. The cutter is fed into the cutting mechanism at a certain speed, and the cutter is cut by the high-speed rotation and then thrown out of the machine through the grass outlet.
Taizy is a manufacturer specializing in agricultural machinery. With more than 10 years of experience in the production of Chaff Cutter, Chaff Cutter is sold well in China and exported to overseas.
Please contact us if you are interested
Our website:https://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-3/
Email:jerryzhangshuliy@gmail.com

Ultra-low-cost Rice Harvester Combine Thresher Machine
http://www.agriculture-machine.com/rice-harvester-combine-thresher-machine/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

The corn planter refers to a planting machine that uses crop corn seeds as a seeding object (while taking into account crops such as soybeans). Usually, the name of the planter is often referred to as the name of the crop species, such as corn planter, grain seed drill, corn seed drill, cotton. Planters, pasture spreaders, etc.
The corn planter has the characteristics of uniform seeding, uniform depth, stable row spacing, good soil covering, seed saving and high work efficiency. The correct use of the planter should pay attention to the following 10 points:
1 Maintenance before entering the field should clean the sundries in the seeding box and the grass and soil on the opener to ensure good condition, and lubricate the drive and rotating parts of the tractor and planter according to the requirements of the manual. Oil, especially before each operation, pay attention to the lubrication and tension of the drive chain and the tightening of the bolts on the planter.
2 The rack cannot be tilted. After the planter is attached to the tractor, it should not be tilted. The work should be horizontal before and after the rack.
3 Do a good job of various adjustments According to the provisions of the instruction manual and agronomic requirements, adjust the seeding amount, the line spacing of the opener, and the depth of the dredging wheel.
4 Pay attention to the seeds added to the seed box to achieve no small, sputum, and miscellaneous to ensure the effectiveness of the seed; secondly, the seed box should be added at least to cover the entrance of the seed box to ensure smooth seeding. .
5 Trial Broadcasting In order to ensure the quality of sowing, it is necessary to insist on trial broadcasting for 20 meters before the large-scale planting, and observe the work of the planter. Consultation with agricultural technicians, local farmers, etc., confirming that the local agronomic requirements are met, and then planting large areas.
6 Pay attention to the uniform travel speed of the farmer's hand to choose the travel route, and ensure that the addition and mechanical access are convenient. When planting, pay attention to the uniform speed and straight forward. Do not slow down or stop midway to avoid replay or missed broadcast; to prevent the opener Blockage, the planter's lifting should be operated while traveling, and the planter should be lifted when turning backwards or turning.
7 First broadcast the ground First, cross the ground, so as not to harden the ground, causing the broadcast depth is too shallow.
8 Frequent observations When planting, the working conditions of the seed meter, opener, cover and transmission mechanism are often observed. If blockage, clay, entanglement, and seed coverage are not strict, it should be eliminated in time. Adjustment, repair, lubrication or cleaning of grass wraps must be done after parking.
9 Protection of the machine When the seed drill is working, it is strictly forbidden to reverse or turn sharply. The lifting or lowering of the planter should be carried out slowly to avoid damage to the machine.
10 Pay attention to the seed box. The seed in the seed box should not be less than 1/5 of the volume of the seed box. When transporting or transferring the land, the seed box should not contain seeds, and no other heavy objects.
Taizy is a professional manufacturer integrating scientific research, development, design and manufacture. It is mainly engaged in the import and export business with agricultural machinery. The quality of Corn plant produced by Taizy is reliable and the price is very popular among customers. If you are interested, please contact us.
https://www.agriculture-machine.com/corn-planter/
Email:jerryzhangshuliy@gmail.com

The tray seeder is easy to operate, and the user only needs to provide 220V universal power supply to work immediately, without professional maintenance personnel. The machine is small in size, light in weight, flexible in operation, simple in structure, accurate in seed collection, seeding, pressing, and seeding.



1. 750 watt imported whirlpool fan with strong suction.

2. Made entirely of high quality stainless steel.

3. According to different seed and sowing requirements, configure the corresponding seeding board and suction nozzle, the seed size should be greater than 0.2mm, and the size should not exceed the size of soybean. Conventional pepper, tomato, and grass flower seeds are suitable.

4. Can be equipped with seeding board 288 holes, 200 holes, 128 holes, 98 holes, 72 holes, 50 holes. The seeding board is matched with the tray, and the size of the tray must be 54*28cm.

5. According to the growth requirements of different varieties, the depth of seed insertion into the substrate can be adjusted.

6. One plate at a time when sowing, the seeding speed is more than 1000 plates per hour. Efficient and convenient to use, easy to operate.

Please leave your whatsapp and email if necessary. We will contact you in time.
https://www.agriculture-machine.com/farm-seeding-machine/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/rice-harvester-combine-thresher-machine/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

The principle of plant protection mechanical spray is to send the liquid medicine from the liquid tank through the liquid medicine pipe to the nozzle by the pressure generated by manual, motorized or electric motor. Under the combined action of the pressure + nozzle structure, the spray hole is sprayed, and the air molecules collide. The droplets of different sizes are formed until they are sprayed onto the surface of the target.

At present, there are two common types of plant protection drone spraying systems, one is the combination of pressure pump + pressure nozzle, and the other is the combination of peristaltic pump + centrifugal nozzle, which provides power drainage through the pump and then reaches the nozzle through the conduit. Spray the pesticide evenly onto the surface of the crop.

In the end, how many droplets can reach and evenly cover the target. At present, the proportion of commonly used spray equipment pesticides on the target is 25~50%, that is, more than half of the liquid medicine drifts away or falls in the wind. soil.

The loss of so many liquids is not only wasteful, it undoubtedly increases the cost of crop management, and also causes pollution of soil, water and air. The original high-quality pharmaceuticals have a flat or even poor performance. Therefore, how to control the drift and loss of droplets is worthy of further study.

For details, please pay attention to:https://www.agriculture-machine.com/agricultural-drone-sprayer-in-china/
Email:jerryzhangshuliy@gmail.com

https://www.agriculture-machine.com/rice-milling-plant-machine/
Email:jerryzhangshuliy@gmail.com

The hammer mill is similar to a hammer crusher used in general industry. The main purpose of the hammer crusher is to turn solid materials into small pieces under mechanical force. Therefore, it is widely used in China's metallurgy, coal, construction and feed processing sectors. The operation of mechanically breaking the internal cohesion of the material and dividing it is called crushing or fine grinding. Generally speaking, a large piece of material is split into small pieces of material, called crushing, and a small piece of material is turned into a fine powder called a fine grinding. The crushing and fine grinding habits are collectively referred to as crushing. After the solid material is split into small pieces or fine powder, the surface area per unit weight will increase, thereby increasing the reaction speed of its physicochemical action. The hammer mill is also mainly used for all kinds of straw and grain. Straw such as peanuts, crops, soybeans, etc.

https://www.agriculture-machine.com/hammer-mill-machine/
Email:jerryzhangshuliy@gmail.com

This greenhouse vegetable seeding machine is mainly used to cultivate seed into seedling that can be transplanted in the subsequent process. Its capacity is 300-800trays/hour and precision rate is more than 97%;

https://www.agriculture-machine.com/farm-seeding-machine/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

https://www.agriculture-machine.com/sunflower-thresher/
Email:jerryzhangshuliy@gmail.com

(1) When the chaff cutter is in operation, the safety protection equipment must be complete.
(2) The operator should fully understand the performance of the machine. It is strictly forbidden to start work after drinking, sickness or excessive fatigue. When working, people and things should not be close to the running part.
(3) Adolescents under the age of 16 and those who do not have the rules for the use of the machine are not allowed to work alone.
(4) The working place of the chaff cutter should be spacious and equipped with fireproof equipment.
(5) When feeding grass, the operator should stand on the side of the feeding hopper, and it is forbidden to reach into the shield of the feeding hopper with both hands. At the same time, it is necessary to strictly prevent wooden sticks, metal objects, masonry, etc. from entering the machine, so as to avoid injury to the machine.
(6) It is forbidden to reverse the cutter head.
(7) The mower must work at the specified speed, and it is forbidden to overspeed and overload work.
( When replacing the fasteners of the chaff cutter and fixed blades, 8.8 bolts and 8 nuts must be used. It should not be replaced by low-grade bolts and nuts.
(9) If abnormal noise is found during work, stop the inspection immediately. Power must be cut off before inspection to prevent troubles when the machine is running.
(10) The amount of material to be fed should be appropriate, and too much may cause the overload to stop. Of course, it should not be too small, too little will affect the efficiency of cutting.
(11) Before stopping work, first set the displacement handle to 0 position, let the machine idle for about 2 minutes, and then stop the dust and weeds in the machine.

https://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-3/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/small-thresher-for-rice-wheat-beans-sorghum-millet/
Email:jerryzhangshuliy@gmail.com

Corn shelling machine is mainly used to process the peeled rice into millet milled rice and sorghum, as well as the peeling of corn, wheat, barley, mung bean, soybean and other whole grains and Chinese medicine Kochia scoparia and glutinous rice, with grinding wheel, sieve and grinding. The rice knife has a fan in the lower part of the base and a drainage channel on the fuselage. The special feature is that the main shaft of the grain peeling machine is made up of long and short shafts, which are long and short. A bearing is arranged at the insertion gap of the shaft, and the long shaft and the short shaft are respectively connected with the motor, and the pulley provided on the long shaft is larger than the pulley provided on the short shaft, the fan is installed at the lower part of the short shaft, and the grinding wheel is superposed on the On the long axis. The utility model has the advantages that the differential rotation between the fan and the grinding wheel can be realized, the amount of the drainage is increased, and even if the working is long, the accumulation of the suede is not caused, the grain breaking rate is reduced, and the processed grain is not doped with the skin, the grain. After peeling, no sieving treatment is needed, which greatly improves the grain removal rate and processing efficiency. In particular, the corn has been removed from the hard hull and germ parts, which improves the edible taste of corn and expands the application range of corn. Corn flour processing corn noodles are very popular.

https://www.agriculture-machine.com/maize-shelling-machine/
Email:jerryzhangshuliy@gmail.com

The quality of rice transplanting has a direct impact on rice yield, and has a great relationship with the manipulator operation of rice transplanter technology. In order to ensure the quality of the machine transplant and achieve the purpose of increasing rice production, the operator should be proficient in the following operating techniques.

First, in the operation of the rice transplanter, it is necessary to maintain a uniform speed, and it cannot be suddenly slowed down or frequently stopped. The walking route of the work should be linear. During walking, try to correct the straightness of the driving with or without the pinch of the handlebar or the violently pulling the armrest to prevent the sharp turn from causing the leak or re-insertion.

Second, in the operation, while observing and observing, the problem should be eliminated in time. At the same time, pay attention to the work of the seedling roller in the seed box slot. If you find that the notch has roots or clay, stop it in time to prevent the quality of the transplant.

The third is to achieve "five no insertion", that is, when heavy rain is not inserted, the low temperature is not inserted, the floating mud is not inserted, the field is not flat, and the transplanter is not adjusted.

The fourth is to maintain the transplanter in time. After working every day, you should ask for the dirt and debris on the rice transplanter to add fuel, oil and gear oil. Lubricate, adjust, and fasten each joint to each part.

https://www.agriculture-machine.com/8-rows-rice-transplanter/
Email:jerryzhangshuliy@gmail.com

When the sunflower is ripe, it will produce some sunflower seeds. Whether it is roasted or fried, or boiled, sunflower seeds are very popular. But people who eat sunflower seeds don't know the hard work of people who grow sunflowers!
In particular, how to get the sunflower seeds from the handle of the sunflower is a laborious and difficult task. The sunflower thresher produced by taizy machine can quickly and easily remove sunflower seeds from the sunflower handle.

https://www.agriculture-machine.com/sunflower-thresher/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/small-thresher-for-rice-wheat-beans-sorghum-millet/
Email:jerryzhangshuliy@gmail.com

Sunflower thresher, the threshing machine comprises a body, a threshing roller, a sieve, a bracket, a suspension frame, the body has a tubular working chamber, the inlet is provided on the upper part, the discharge port is arranged on the bottom, the threshing roller and the sieve setting Inside the working chamber of the body, the bracket and the hanger are disposed on the outside of the body. The utility model adopts the above structure, can be conveniently installed on the bumper of the tractor through the suspension frame thereon, and is normally operated by the power of the tractor. The structure of the thresher is simple and reasonable, convenient to install and use, and the threshing effect Good, high efficiency, especially suitable for individual farmers. The utility model is composed of a frame, a seed-removing shaft, a seed-removing tooth, a transmission wheel and a “concave”-shaped fence-shaped bracket disposed under the seed-removing shaft, and is characterized in that the seed-removing shaft or the shaft is fixed outside the seed-removing shaft. The sleeve is equidistantly longitudinally provided with a plurality of integral continuous de-seed teeth which are kept at a certain distance from the shaft surface or the tube surface by connecting the support rods, and the section of the de-seed teeth is circular or rectangular, triangular or diamond-shaped. The utility model has the advantages of simple structure, light weight and low cost, and the removal rate can reach 100%, thereby solving the problem that the existing sunflower seed extracting machine has a complicated structure and a low removal rate.

https://www.agriculture-machine.com/sunflower-thresher/
Email:jerryzhangshuliy@gmail.com

https://www.agriculture-machine.com/rice-milling-plant-machine/
Email:jerryzhangshuliy@gmail.com

The oil sunflower threshing machine is composed of a rotating ram, a floating grid, a seed skate, a frame, a cover and the like. Compact structure, simple and safe operation, convenient and fast.

Working principle: the oil sunflower is evenly placed upward from the back of the feed port, and the pressure of the slanting shaft and the pressure of the floating grid plate form a gentle swaying force, so that the oil sunflower seeds and the disk are separated. The oil sunflower plate slides straight along the grid, and the grain slides down through the gap of the floating plate and slides down the seed plate. Oil sunflower threshing is completed.

https://www.agriculture-machine.com/sunflower-thresher/
Email:jerryzhangshuliy@gmail.com

Sunflower thresher, the threshing machine comprises a body, a threshing roller, a sieve, a bracket, a suspension frame, the body has a tubular working chamber, the inlet is provided on the upper part, the discharge port is arranged on the bottom, the threshing roller and the sieve setting Inside the working chamber of the body, the bracket and the hanger are disposed on the outside of the body. The utility model adopts the above structure, the suspension frame thereon can be conveniently installed on the bumper of the tractor, and the normal operation of the tractor is carried out by the power of the tractor. The structure of the thresher is simple and reasonable, the threshing effect is good, and the efficiency is high. It is especially suitable for individual farmers.
The price of sunflower threshing machine produced by taizy is a machine worth buying. If you need, please pay attention to our website, we will give you detailed parameter price.
https://www.agriculture-machine.com/sunflower-thresher/
Email:jerryzhangshuliy@gmail.com

http：//www.agriculture -machine.com/small-thresher-for-rice-wheat-beans-sorghum-millet/

Pecan is generally picked by hand and is not safe. Because the tree grows on a steep slope and is high, its risk is also high. Pecans also have certain skills. One must be accurate, that is, the pecan is hit, otherwise it is hit. On the leaves, the second is to bite the pecans by slightly shaking the ends of the bamboo poles and driving the bamboo poles to shake freely.
Our Electric Olive picking machine is specially made for picking pecans, jujubes and chestnuts. If you are interested, please pay attention to our website.https://www.agriculture-machine.com/electric-olive-picking-machine/

Used for cutting green (dry) corn straw, wheat straw, straw and other crop straw and forage. The processing materials are suitable for breeding cattle, sheep, deer, horses, etc., but also can be processed cotton stalks, branches, bark, etc., for straw power generation, ethanol refining, papermaking, wood-based panels and other industries.


Three-blade cutter set with steel reinforcing ring, rigid, strong, integrated; A bidirectional adjusting nut is added between the cutter disc and the spindle to facilitate axial movement and more free adjustment of blade clearance.

Advanced feeding mechanism, unique feeding roller device (), automatic feeding, conveying chain does not tangle grass, feeding smooth, high production efficiency.

Safety guide device for moving knife is designed to prevent nibbling accident, and the whole machine is safe and reliable.

Unique structure of speed regulating gear box, convenient and accurate grass length adjustment, reliable box sealing, good lubrication.

The transmission part is equipped with externally adjustable rolling bearing and universal coupling, with compact structure, flexible operation and convenient disassembly and assembly.

Advanced feeding and conveying mechanism controlled by a switch, easy switch, advance and retreat freely.

Domestic model, production efficiency of the hay cutter; Equipped with rubber tires, to solve the embarrassment of large equipment mobile inconvenience.

Blade selection of high quality steel, refined by a special process, super wear resistance; Using high strength bolt connection, safe and reliable use.

https://www.agriculture-machine.com/small-chaff-cutter/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/rice-milling-plant-machine/
Email:jerryzhangshuliy@gmail.com

Zhengzhou Taizy Machinery Co., Ltd is a professional manufacturer of rice milling units. As a professional rice processing unit manufacturer, the company has a large number of technical talents, all of which are designed in CAD, with advanced Japanese technology and German equipment processing and production. Taizy Machinery has consistently adhered to the principle of "quality, reputation first", to provide customers with high quality, reasonable price products, to achieve customer satisfaction.
Our machines are all laser cut and made of high quality stainless steel.
The whole machine has beautiful appearance, compact structure, small floor space, no hidden rice, high rice yield, less broken rice and low power consumption.
When the rice is in the machine, the standard finished rice can be obtained in one process.
1. Each single unit is connected to the transmission, which uses less lifting equipment, low power, less broken rice, small floor space, and the price is cheaper than similar models.
2, rice can be processed without much (more than 10 kg of rice can also be processed, the machine contains up to 0.5KG rice); short work flow, start up rice, close the end (saving time, less electricity) 3, bring their own polishing, Rice has a high finish;
4. In addition, the built-in rice bran crusher (can be selected) can be installed at the customer's request to make the operation simpler, more economical and practical;
5, the layout is reasonable, the operation is simple, during the processing, there is no need to swim around.

http://www.agriculture-machine.com/rice-milling-plant-machine/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/small-thresher-for-rice-wheat-beans-sorghum-millet/
Email:jerryzhangshuliy@gmail.com

The emergence of rice transplanter has improved the efficiency and quality of transplanting rice seedling. Meanwhile, the maintenance and lubrication of rice transplanter should not be ignored. So, what should be paid attention to when using rice transplanter oil?Taizy Machinery a perennial rice planter producer, said it takes science to use oil to make the machine work longer.

First of all, for the use of lubricants, whether new car or maintenance overhaul or every shift should carefully check the oil level. Keep it at the upper end of the scale. Tongfang machinery pointed out that if you do not pay attention to the steep slope is easy to cause powerless parking, acceleration of HST wear. Do not save money by delaying the oil change, which will shorten the life of the rice transplanter.
Secondly, for oil and cooling fluid, the oil must be kept at the upper limit of the scale, especially after the new car or overhaul. The oil level should be checked and replaced in time according to the instructions without delay.

The coolant must be sufficient, and it is best to add the products specified by the manufacturer for replacement, otherwise it will cause high temperature and rust.

Third, the fuel should use lead-free 93# above standard gasoline. If the engine detonation or tremor may be water in the oil, it should be replaced immediately, otherwise it will damage the air plate and other auxiliary parts.

For more on rice transplanters, please visit our website.

http://www.agriculture-machine.com/rice-transplanter-machine/
Email:jerryzhangshuliy@gmail.com

The rice transplanter is an agricultural machine that implants rice seedlings into rice fields. When planting, firstly, several rice seedlings are taken from the seedbed by mechanical claws to implant the soil in the field. In order to keep the angle between the seedbed and the ground at right angles, the front end of the mechanical claw must adopt an elliptical action curve. The action is done by a planetary mechanism of a rotating or deforming gear, and the advancing engine can simultaneously drive these moving machines. The rice transplanter must have a slippery wheel and a floating design when traveling on the soil. If the seedlings are cut into pieces, the rice seedlings are taken out from the specific seedling box and then planted mechanically.



http://www.agriculture-machine.com/rice-transplanter-machine/
Email:jerryzhangshuliy@gmail.com