₦airaland Forum

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

In order to understand the quality of rice mills in China, the National Grain and Oil Processing Machinery Quality Supervision and Inspection Center has carried out the operation of 30 rice mill users in Guangxi, Hunan, Shangdong, Sichuan and Liaoning provinces. The quality and safety survey of 30 rice milling machine users is as follows:
1. How to use the training. Only 3 users reported that they were trained by the company before use, accounting for 10% of the total number of surveys. The rest of the users were trained.
2. Security protection. Only two user rice mill safety guards were complete, accounting for 6.7% of the total surveyed; 70% of users removed the safety guards, and 23.3% of the users did not have safety guards when they purchased the machine.

3. Safety signs. Only one user with safety signs meeting the standard requirements accounted for 3.3% of the total surveyed; 23.3% of the users reported that the safety signs of the rice milling machine were incomplete or unclear, and 73.3% of the users had no safety signs on the rice mill.
4. Processing of rice quality. There are 8 users processing rice with good quality, accounting for 26.7% of the total surveyed; 73.3% of users have the quality problem of containing more grains and more rice in rice.
5. Quality of parts. Fifteen users raised the quality of parts, accounting for 50% of the total number of surveys. Among them, the problems of poor quality and short service life of key components such as rice sieves and rubber rollers are particularly prominent.

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

According to report, global Market for Chaff Cutter to 2023 offers latest information and historical data on chaff cutter market. It shows that the demand about chaff cutter machine is increasing,that is why we spare no effort to improve our expertise. The reality, to be frank, is that we have exported numerous containers chaff cutter machine to other countries. Why are we professional in this series of machine? Let me give you a answer.

http://www.agriculture-machine.com/why-are-we-professional-in-chaff-cutter-machine/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/category/products/
Email：jerryzhangshuliy@gmail.com

The rice milling machine is a kind of grain processing equipment. We need to maintain it frequently to extend the life of the rice milling machine. The following is a brief introduction to the maintenance of the rice milling machine.

1rice milling machine to maintain a certain degree of dryness, the general moisture content can not be greater than 14% & 15%. When the moisture content of rice is too high, the rice grains are broken, affecting the quality of rice, and the power consumption is also increasing.
2 Pay attention to check whether there are nails, stones and other debris in the rice, so as not to enter the whitening chamber to cause blockage or damage to the rice sieve.
3 Before starting the machine, check the machine parts such as rice sieve, rice knife and roller core to see if the bolts and nuts are tight.
4 Turn the roller before starting to check if there is a jam.
5 When starting the machine, first run the air load to the normal speed, then pour the rice into the hopper, and pay attention to the operation of the rice mill.
6 After each day of work, check the rice mill and supporting facilities and find out the problems in time to ensure that the rice mill is always in good condition.

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

The mower is made of corn stalks, wheat straw, straw and other crops, and is processed by smashing and cutting to produce feed processing equipment suitable for livestock, cattle, sheep, horse and deer feed.


http://www.agriculture-machine.com/category/products/
Email:jerryzhangshuliy@gmail.com

Rice is a basic food crop, and its production and processing have always been valued by China. Rice mills, as processing equipment for rice, play an important role in improving food utilization. In the spindle system of the rice milling machine, there are many asymmetric parts in the structure of the shaft, and there are many curved grooves on the roller, which leads to the existence of eccentric mass, which will cause severe vibration when the rotation speed increases, resulting in the broken rice rate. Increased, bearing life is reduced.
In order to solve the problem of broken rice rate, the static analysis and modal analysis of the vertical rice mill by the finite element method, the researchers got some inspiring conclusions. However, in the modal analysis, this article only considers a single spindle, and does not take into account the components on the spindle at the same time. In fact, when the roller, pulley, and roller are mounted on the spindle, the frequency has changed.

The above problems belong to the field of rotor dynamics in mechanics. However, in rotor dynamics, in order to solve such problems, the structure is often simplified, and then the corresponding formula is derived. These formulas have a directional effect until they are used, but for a complex rotor system such as a rice mill, the theory is difficult to use. At this time, the numerical analysis method, such as the finite element method, is an effective way to perform the dynamic analysis of the rotor system. According to the rotor dynamics theory, when the operating speed of the rotor system changes, its critical speed will also change. Due to the complex structure of the spindle system, the finite element method is used to analyze it, and the critical speed of the rice milling machine spindle at different speeds is investigated to provide a method for its calculation to provide a reference for the calculation of the critical speed of the rotor system.


http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/rice-transplanter-machine/
Or send me an email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/our-company-finds-a-chaff-cutter-distributor-in-pakistan/
Or send me an email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-3/
Or send me an email:jerryzhangshuliy@gmail.com

Yes, please leave your whatsapp and email and we will send you the details.
My Email:jerryzhangshuliy@gmail.com

Abramgreen:
Do you have very small rice dehusking machines.

In view of the maintenance problems of daily rice transplanter, it is also a problem that many users are more troublesome. Taizy Machinery recommends that everyone should thoroughly inspect and repair the rice transplanter before the season, according to the instruction manual, the fuel must be refilled. Come on.
Before use, the technical status of each part of the machine must be checked. If there is any abnormality, it must be adjusted, and the oil should be added to each rotating part and the relative movement matching part.

In the course of operation, it is necessary to pay attention to the technical state of the rice transplanter, the resistance is large, the quality of the transplanting is reduced or the work of each part is not normal. The machine should be stopped for inspection, and the cause should be adjusted and repaired. Every 4-6 hours of operation, oil lubrication should be applied to each rotating part as required.
After the end of each day, the rice transplanter should be cleaned, and the machine parts should be inspected for damage, deformation, looseness of the screws, and oil.
When walking on land, avoid collision, so as to avoid broken or deformed needles, shackles and other parts. After the season is finished, the machine should be washed and dried, oiled and rustproofed, and stored in a dry place indoors. Do not store debris on the rice transplanter to avoid deformation or damage.

http://www.agriculture-machine.com/rice-transplanter-machine/
Email:jerryzhangshuliy@gmail.com

More and more frying machines appear in people’s daily lives. Do you know the characteristics of frying machinery?

1. The water supply valve is located at the lower oil layer. It can be added at any time without affecting the frying work. It also has a check valve to solve the problem of stopping the water and returning the oil to the water pipe during the watering process.

2, the whole process oil temperature automatic control, the temperature can be set freely from 0 ~ 400 ° C, suitable for frying foods of various process requirements.

3. The lower part of the water is provided with a temperature measuring device, and the water temperature can also be set, which is compared with the measured water temperature. When the temperature is higher than the set temperature, cooling measures can be taken. Prevent the occurrence of water boiling in advance.



4. The oil-water separation surface is provided with an observation glass tube and a drain valve detection device.

5, the use of internationally common oil-water mixing process design, compared with ordinary frying pan, more energy-saving. Extend the life cycle of cooking oil, without the production of carbonized oil, saving 50% of oil.

6, the use of this fryer process to produce food with good finish, bright color, product quality grades significantly improved, and solve the problem of excessive acidification of fried foods.

7, a multi-purpose machine, no need to change oil can fry a variety of food, no fumes, no odor, save time and environmental protection.

8. With the frying equipment, the food residue generated during the frying process can be sedimented into the lower funnel through the filtration of water, and discharged through the sewage outlet, thereby achieving the function of filtering oil and not wasting oil.

http://www.peanuts-machine.com/characteristics-of-frying-machinery.html
Email:jerryzhangshuliy@gmail.com

The machine is mainly used for threshing wheat, rice, beans, sorghum, millet and other crops. It is characterized by simple structure, convenient operation and high efficiency.
Operation of small-sized multifunction thresher:
(1) Before starting up the small multi-function thresher, the working site should be cleaned and remove things not irrelevant to threshing; Children are prohibited, to avoid accidents.
(2) Feeding should be uniform, wheat shall be pushed directly into the roller, do not push wheat into roller by hand, fork or other tools; Prevent stones, sticks and other hard objects from feeding into the machine.

(3) Make sure connection of driving belt is firm enough; It is strictly prohibited to remove the belt or place any object on the running transmission part.
(4) Continuous longstanding working is not recommended. If you have worked about 8 hours, stop the machine for inspection, investigation and lubrication to prevent severe friction to wear and heating to deformation.
(5) Small multi-function thresher shall wear an anti-inflammatory cover on the exhaust pipe to prevent fire.
(6) When failure happens, the small multi-function thresher should be shut down for maintenance and adjustment in the process of operation.

http://www.agriculture-machine.com/application-scope-of-small-sized-multifunctional-thresher/
Email:jerryzhangshuliy@gmail.com

Chaff Cutter is a necessary mechanical equipment for rural farmers and small and medium-sized feed processing plants. It can also be used by farmers, pastures, paper mills and medicinal plants. The equipment is mainly used for cutting agricultural (grass) corn stalks, straw and other crop straws and pasture agricultural livestock feed processing machinery. It is a good helper for cattle, sheep, horses and other livestock. The mower is a mechanical device. It is a common problem for us to have all kinds of small problems. Here is a small editor who teaches you how to make a repairing mower.

Chaff Cutter failure 1: bearing overheating

Cause of failure: too much grease, too little or bad grease; bearing damage;



Remedy: Add grease according to the regulations; replace the bearing; straighten the spindle, balance the rotor; replace the oil seal; reduce the amount of feeding; adjust properly.

Chaff Cutter fault 2: stuck, abnormal sound

The cause of the failure: the fastening mower screw is loose; the blade clearance is too small; metal, stone and other hard objects enter the machine.

Remedy: Check the cutter head and fastening screws for looseness; loosen the screws and adjust the blade clearance to the standard requirements; stop the inspection and open the casing to remove foreign matter.



Chaff Cutter fault 3: The machine is vibrating or has strong noise

The cause of the failure: the weight difference between the two sets of hammers is too large; the individual hammers are not opened by the circlip; the bearing is damaged; the main shaft is bent and deformed; the weight difference of other parts on the rotor is too large, causing the rotor to be unbalanced.

http://www.agriculture-machine.com/chaff-cutter-repair/
Email:jerryzhangshuliy@gmail.com

Please contact us if necessary.
Email:jerryzhangshuliy@gmail.com

The Kenaf decorticator is an advanced device that replaces the cumbersome manual work by using a motor or diesel engine to separate the fresh hemp from the fresh mast by the principle of stripping the knife.

Alias, hemp, green hemp, ramie, water, hemp, wild kenaf, round jute, round jute, bitter sesame, bovine mud, three beads, day sage, hemp bone, etc., is a kind of long Soft, lustrous plant fibers can be woven into high-strength, rough filaments. Jute fiber is one of the cheapest natural fibers. It is second only to cotton in terms of planting amount and use. It has the characteristics of good moisture absorption and fast loss of water. It is mainly used for textile sacks and burlap. China is a traditional cultivation country of kenaf. The kenaf fiber is rough, stiff and poorly spinnable. Sack and hemp rope are the traditional uses of kenaf. The advent of the Kenaf decorticator has replaced the manual manipulation of the stripping of us that has been passed down from generation to generation in rural areas. It will break the traditional concept of arranging and arranging for thousands of years without increasing production and income.

The Kenaf decorticator can be powered by a motor or diesel engine. It effectively solves the problem of using electricity in underdeveloped or underdeveloped areas. The machine is equipped with a full copper core for long life and safety. However, the use of electricity can not achieve the effect of rapid movement, so the technicians of our factory have been modified on the basis of the previous ones, and the diesel engine is used as the power, so that the purpose of movement can be achieved in the process of use, which is convenient, fast and rapid. It is the gospel of the majority of farmers.

http://www.agriculture-machine.com/kenaf-decorticator/
Email:jerryzhangshuliy@gmail.com

Chaff Cutter is used to cut green (dry) corn straw, wheat straw, straw and other crop straw and forage grass. The processed materials are suitable for breeding cattle, sheep, deer, horses, etc., but also can be processed cotton straw, branches, bark, etc., for straw power generation, ethanol extraction, papermaking, artificial board and other industries.

Chaff Cutter is powered by electric motor. Will power transfer to the spindle, the other end of the spindle gear through gear box, universal joint and so on will pass the speed control of the power transferred to the pneumatic bin, when the material to be processed into the upper and lower pneumatic bin, was pressed cao kun clamping and at a certain speed into the cutter cutter, through the high-speed rotary cutter after cutting through the blade mouth out of the machine.



Chaff Cutter features

1. Three-blade cutter plate is equipped with steel reinforcing ring, which is rigid, strong and integrated; A bidirectional adjusting nut is added between the cutter disc and the spindle to facilitate axial movement and more free blade clearance adjustment.

2. Advanced straw feeding mechanism, unique straw feeding roller device, automatic feeding, non-tangling of conveying chain, smooth feeding and high production efficiency.

3. Design safety guide device for moving knives to prevent nibbling accidents and ensure the safety and reliability of the whole machine.

4, unique speed control gear box structure, grass length adjustment is convenient and accurate, box sealing is reliable, good lubrication.

5. The transmission part is equipped with externally adjustable rolling bearing and universal coupling, with compact structure, flexible operation and convenient disassembly.

6, the advanced feeding and conveying mechanism is controlled by a switch, easy switch, advance and retreat freely.

7. The blade is made of high quality steel and refined by special process, with super abrasion resistance; High strength bolt connection, safe and reliable use.

http://www.agriculture-machine.com/small-chaff-cutter/
Email:jerryzhangshuliy@gmail.com

amerengues:
Hello, can u reach me on amerengues@yahoo.com.

ok

Introduction:

Peanut Peeling Machine is an ideal equipment for peeling roasted peanuts, it can peel the red skin of peanut after roasting with high efficiency and good quality. It is widely used for peanut paste, fish-skin peanut and other peanut snack food.

Features:


It includes 3 parts: peeling unit, supports and skin sucking device. Touch food part is made of stainless steel


Peanut can not be injured when peeling


peeling rate more than 98% for Peanut peeling machine.


High peeling effect and low noise.


Structure principle:

The peanut peeling machine adopts roller-type structure and the roasted peanuts enter peeling unit through the hopper, and the red skin is removed by the high-speed rotating roller,and sucked out by fan, and the peeled white peanut kernel is discharged through the front feed port.



Technical data:

Model SLPS-200 SLPS-400 SLPS-600
Capacity 200kg/hr 400kg/hr 600kg/hr
Peeling Ratio 96% 96% 96%
Breaking Ratio 6% 6% 6%
Dimension 1000×350×1100mm 1000×750×1100mm 1000×1100×1100mm
Power 380V/50Hz, 1.1Kw 380V/50Hz, 1.85Kw 380V/50Hz, 2.6Kw


http://www.peanuts-machine.com/dry-type-peanut-skin-peeling-machine.html
Email:jerryzhangshuliy@gmail.com

Introduction:

This peanut coating machine is made of stainless steel .It is a special equipment for wrapping the surface of peanuts. The surface of the processed peanuts is smooth and meets the export processing standards. It has the characteristics of stable rotation, low noise, no pollution, etc. The peanut coating machine can make fish skin peanuts, chocolate peanuts, multi-flavor peanuts, Japanese beans, full mouth, crispy fruit, shrimp crisp beans, spicy beans, dinosaur eggs, etc.

Features:

All made of stainless steel
convenient to wash and maintain
Regular coating.


Structure principle:

The peanut coating machine is composed of the main body, gear box, sugar coating pot, heating device, fan, electric appliance etc. It is driven by the electric motor through the V-belt to drive the worm wheel, the worm, and the sugar coating pan to rotate, and under the action of centrifugal force, the material is in the pot.

Technical data

Model SL-300 SL-400 SL-600 SL-800 SL-1000
capacity（KG/time） 2-3 3-5 15-30 30-50 50-70
diameter（mm） 300 400 600 800 1000
speed（r/min） 46 35 35 35 31
angel（degree） 15-45 15-45 15-45 15-45 15-45
Main power（kw） 0.37 0.37 0.55 1.1 1.1
Heating power（w） 300 600 1000 2000 2000
weight（kg） 40 50 70 280 330
Model SLC-300 SLC-400 SLC-600 SLC-800 SLC-1000
Diameter 300mm 400mm 600mm 800mm 1000mm
Capacity 2~3 kg/time 3~5 kg/time 15~30 kg/time 30-50 kg/time 50-70kg/time
Rotate speed 46r/min 36r/min 35r/min 35r/min 32r/min
Motor 0.37kw 0.37kw 0.55kw 1.1kw 1.1kw
Heating power 0.3kw 0.6kw 1kw 2kw 2kw
seasoning machine



Introduction:

Seasoning machine is suitable for all kinds of food seasoning, feeding, hanging pulp, etc. It’s used for potato chips, French fries, fruit chips, peanuts, broad beans and other snack foods. The octagonal seasoning machine is used for the mixing of seasoning powder in the later stage of food processing or the coating of the raw material and the blending. The structure is simple and practical. The barrel is made of stainless steel octagonal design, which can make the food materials and seasoning powder to be processed in a short time. It is necessary to mix the ingredients thoroughly, and the material is automatically discharged. It is convenient to clean and disinfect without dead angle.

Features:

All made of stainless steel
Short Mixing time and high efficiency
The octagonal design avoids the disadvantages of the raw material of the ball seasoning barrel not turning.
Automatically unloading material
Main parts:

The seasoning machine includes lifting bracket, drum, reducer, motor,control box and supports

Technical data

Model Dimension weight power capacity
SL800 1000*800*1300 130 1.1 300kg/h
SL1000 1100*1000*1300 150 1.5 500kg/h
SL800 1000*800*1300 130 1.1 300kg/h


http://www.peanuts-machine.com/peanut-coating-machine.html
Email:jerryzhangshuliy@gmail.com

If you are interested, please pay attention to us.
http://www.peanuts-machine.com/mini-manual-peanut-picking-machine.html
Email:jerryzhangshuliy@gmail.com

The Chaff cutter is made of thickened steel plate and 65 manganese steel cutter, replacing the iron/steel cutter used by other manufacturers, which is more durable and sharp! The machine is equipped with long, empty, short three gear, you can adjust the length of cut grass

The Chaff cutter is used to cut all kinds of green hay, hay, straw, wild grass, wheat straw, corn straw and other hay, is currently widely used economic hay cutter equipment, with small size, light weight, installation, operation, maintenance is simple, high production efficiency advantages. Production is used to feed cattle, horses, sheep, pigs and other livestock feed grass and compost, straw returned to the field. Main use: forage zha into 1 to 2 cm of small pieces to feed cattle, sheep, geese, fish or production of green storage feed. Can process all kinds of grass and straw, wet – dry dual-use.

The chaff cutter is mainly composed of The body, straw feed roller, cutter holder assembly, blade, feeding device, frame and other 6 parts.

This type of hay cutter is mainly a part of the frame, drum part, feeding grass dustpan part and overload protection device, simple structure.

features:

I. compact structure, small size, light weight, easy to move, and favorable price.

Two, two rollers can automatically “feed”, reduce the labor intensity of feeding, but also improve the efficiency.

Three, 4 blades are used 65 manganese steel knife, sharp blade, cut out of the grass is not only flush, and broken section rate is high, cut grass quality is good.

4. The chaff cutter is equipped with overload protection device, which can avoid The card failure caused by too much material discharging at one time.

Five, the body is made of steel, durable

http://www.agriculture-machine.com/chaff-cutter-is-introduced/
Email:jerryzhangshuliy@gmail.com

Hello, please leave your whatsapp and email if necessary, we will contact you in time.
Email:jerryzhangshuliy@gmail.com

The large-scale corn thresher has been mass-produced in China, and the speed of implementation is very fast. Especially the large-scale corn thresher produced by Zhengzhou Shuli Machinery Co., Ltd. of Henan Province has been exported to Nigeria, Kenya, Ghana, Congo and other countries. The volume is getting bigger and bigger, the author hereby writes some precautions for the majority of farmers to refer to:



1. The output of the large corn thresher is very high, so care must be taken during the use. The bearings must be oiled once a day.

2. Large-scale corn threshers are all field operations. After work every day, the dust must be cleaned before work, especially near the bearings and the motor. Never let the dust be buried to avoid burning the motor.

3. In the process of using large corn thresher, it is strictly forbidden to prevent the incorporation of bricks and stones, otherwise the hoppers of drums and hoists may be damaged.

http://www.agriculture-machine.com/big-thresher-for-rice-wheat-beans-sorghum-millet/
Email:jerryzhangshuliy@gmail.com

Application:
1.The big thresher is applied to rice, wheat, beans, sorghum, millet
2. With high capacity of 1000kg/h , the big rice thresher is very popular in India ,we supply more than 10000 pcs to India every year .

Main Structure :
1.This big rice thresher has reasonable design ,it can be convenient to move with the casters
2.The big rice thresher is easy to operate. The discharge port is equipped with a powerful blower and vibrating screen which further blows out impurities while filtering kernels that is pretty clean.
Big-Thresher-for-rice-wheat-beans-sorghum-millet2Big-Thresher-for-rice-wheat-beans-sorghum-millet3
Model SL-125
Raw material Rice wheat beans sorghum millet
Power 3kw motor
Engine Gasoline engine or 12Hp diesel engine
Capacity 800-1000kg/h
Weight 400kg
Size 1340*2030*1380

http://www.agriculture-machine.com/big-thresher-for-rice-wheat-beans-sorghum-millet/
Email:jerryzhangshuliy@gmail.com