₦airaland Forum

Our company specializes in selling all kinds of agricultural machinery, please see website details:
http://www.agriculture-machine.com/palm-kernel-cracker-machine/

Abramgreen:
08021066480

ok

1.Check Machine
(1)Please kindly check the peanut harvester machine part. It means each rotating part of the machine for tangling of seedling weeds or other obstacles. If there is any debris in the cleaning screen or lifting machine, remove them immediately.

(2)Please make sure the tractor at neutral position before your motoring the peanut harvester.If not ,it will make peanut seedlings stacking without fruit.In this way ,can also ensure safety of worker.

2. Please arrange staffs work before starting.This peanut harvester machine needs 3 workers to operate. You have to make sure where has gaw or high place and avoid to drive there while operating. one drives the tractor, and one guides to operate.And the rest for cleaning peanut seedlings which are harvested.Once finding peanut seedlings stacking,please clean the earth or stop work as soon as possible.

3. Check peanut field

1)Select ripe fruit, not fallen dead seedling, large heaven and earth operations.Because the peanut harvester machine have high mission rate if the peanut seedlings were dried.

2)If there are ditches in the ground and field and fill them up. If the trench is too deep, explore other walking routes in advance please.

3）View field obstacles that affect harvesting operations.Remove any stones, sticks and other debris that may affect the harvest in the field, check if there is any trap in the field, and try to avoid it

4）Please check the soil moisture content, species and growth status of crops in advance, and adjust the height of peanut harvester machine’s suspension by combining plot conditions and seedling height.

http://www.agriculture-machine.com/peanut-harvester-ready-before-starting/
Email:jerryzhangshuliy@gmail.com

kunleweb:
Ok

Please leave your whatsapp and email if necessary. We will contact you in time.

August, the harvest season for peanut,peanut is one of the main economic crop at Henan Province, planting area has reached 50,000acre. In recently, with the technical support and improvement of agricultural mechanization,

peanut harvester machine and groundnut sheller machine are widely used at field, which reduces the labor and improves the economic benefits of peanut.

A farmer said: Good planting for this year, that will bring excellent economic benefits to us, we need buy more sets of groundnut sheller machine and peanuts harvester machine to process the peanuts.Harvesting rate will be improve after work by peanut harvester machine.This is very important for us. Then, dry it at sunshine for few days, we use groundnut sheller machine to get peanuts. Very easy operation for groundnut sheller machine from my wife’s feedback.

More important, the government encouraged farmers to buy groundnut sheller machine, by offering subsidies to people. The purpose of government is to develop the crop economy by this policy. The new type of groundnut sheller machine will replace the traditional working way,

Sheller rate about 100%, damage rate under 3-4%, capacity about 800-1000kg/h,with the screen mesh that remove impurity, this is advantage and feedback from farmers, after using groundnut sheller machine. Get good peanuts, farmer will sale it as seed or food with good benefits.
http://www.agriculture-machine.com/groundnut-sheller-machine-promote-economic-development/
Email:jerryzhangshuliy@gmail.com

With the improvement of the quality of life, what are people eating? Is the nutrition high? How did the food come? More and more attention! As the focus of people’s attention, the millet is the main food crop in China. Millet products are an indispensable part of life. This requires continuous improvement of the production efficiency of millet processing equipment and better meet people’s food needs. . The increase in the demand for small and medium-sized complete sets of rice milling machines has increased the processing time of the rice milling machine, which is prone to wear in long-term use. Therefore, it is necessary to know the relevant knowledge of the equipment during the use of small and medium-sized complete sets of rice milling machines. !

First, understand the rice milling process and its characteristics, the system settings and the role of each system, master how to operate to achieve the best rice milling effect.

Second, familiar with the main structure and function of the rice milling machine, the operation precautions and methods in the production process, especially the parts closely related to the grinding effect.

Third, memorize the technical conditions of the grinding rollers of each system and the equipment of each system, so as to cooperate well in operation.
http://www.agriculture-machine.com/knowledge-of-rice-milling-machine/
Email:jerryzhangshuliy@gmail.com

Rice is the most important staple food in people’s daily life. It is mainly made up of various processes such as rice processing and processing by rice milling machine. The rice milling machine can not only remove the outer shell of rice, but also It can improve the quality of rice products, ensure the safety of production, and provide people with higher quality and pure taste of rice, which improves the nutritional value of rice itself. So, what are the main influences of rice milling machines in the rice processing industry?

1. At present, with the continuous improvement of people’s quality of life, the rice processing enterprises that process rice are also moving towards scale and grouping. People are also paying great attention to the comprehensive utilization of rice resources and the brand benefits of product quality. Only in this way can we Promote better development of the industry and adjustment of product structure

2. In the process of adjustment, the large-scale rice processing industry should also invest a large amount of funds to purchase better production equipment, ensuring that the rice yield can be improved while the rice yield and rice product quality and high are improved. Quality, in order to be more popular.

With the continuous development of rice milling machines and the increasing demand of the market, many rice milling enterprises are now going to scale and group, and the comprehensive utilization rate of rice resources in the process of rice milling is also constantly increasing. Improvement, ensuring the quality of rice, allowing rice resources to be used more widely, thus bringing more advantages to people’s lives, saving more resources and costs, and bringing more economic benefits to enterprises.

http://www.agriculture-machine.com/development-of-rice-milling-machine/
Email:jerryzhangshuliy@gmail.com

1. The Small Chaff Cutter bearing overheated

Fault reason: too much grease, zha hay cutter or too little grease; Bearing damage;

Exclusion method: add grease as required; Replacement of bearings; Aligning the spindle and balancing the rotor; Replace oil seal; Reduce feeding capacity; Adjust properly. The rotor is unbalanced.

Exclusion method: select and match hammer pieces so that the weight difference does not exceed 59; The hammer blade can rotate flexibly; Replacement of bearings; Alignment or replacement; Balanced rotor.

2.Small Chaff Cutter stuck and had abnormal sound

Fault reason: fastening hay cutter screw loose; Too small blade clearance; Hard objects, such as metal and common fault stones, enter the machine.

Exclusion method: check whether the cutter disc and fastening screw are loose; Loose should be tightened, adjust the blade clearance to the standard requirements; Stop the machine to check and open the Small Chaff Cutter housing to remove foreign bodies.

http://www.agriculture-machine.com/small-chaff-cutter-failure/
Email:jerryzhangshuliy@gmail.com

With the development of villages and towns in our country, our livestock breeding industry also obtained fast development, after harvest, some crops straw through the Chaff Cutter chopped and then chop, and then become the cattle and sheep feed, feed the animals such as cattle and sheep to use, timely handle many straw ensilage machine, prevent the straw of decayed combustion pollution to the environment, and for large area ground, add the content of soil organic matter, improve soil structure, soil fertility, improvement crops out of the new way, reduce the pollution of the environment.

Chaff Cutter is mainly composed of feed device, transmission device, feed device, Cutter, crushing device, filter device, throwing device, walking device, protective device, traction device and so on. Straw Cutter belongs to a multi-purpose fresh straw Cutter, dry straw Cutter, qing storage hay Cutter, corn straw Cutter and other straw Cutter cutting and kneading equipment, is a professional research for farmers Chaff Cutter, for farmers to solve the problem of straw waste.

Chaff Cutter promotes the development of animal husbandry and meanwhile reduces the waste of straw, which indirectly promotes the social and economic development of our country.

http://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-3/
Email:jerryzhangshuliy@gmail.com

kunleweb:
Ok

Hello,Please contact us if necessary Email:jerryzhangshuliy@gmail.com

There are three main types of small rice milling machines in China: separate rice milling machines, Combined rice mill and Spray rice mill.
separate rice milling machines
The split rice mill is easy to operate and has a low price, but the model is aging, and the milled rice is poor, and it has gradually been eliminated. Including a feeding device, a rice milling device and a separating rice bran device, the outlet of the feeding device is connected to the inlet of the rice milling device, and the outlet of the rice milling device is connected to the inlet of the separating rice bran device, characterized in that the feeding device The feed port is connected to a moisturizing device for wetting the grain, which is a tubular structure comprising a steam inlet and a grain inlet, and a valve is provided at the steam inlet.

Combined rice mill is a kind of high efficiency rice processing comprehensive equipment, with a compact structure, beautiful shape, simple operation, high rate of rice, broken rice, low power consumption and other advantages, suitable for farms, collective and individual grain processing, processing of rice quality is good, but its structure is complex, the price is more expensive.
The spray type rice milling machine has a good cost performance, and can complete the shelling and whitening process at one time, and the processed finished rice is white and bright, and has become the mainstream product in the market in recent years. Compared with the spray-type and split-type rice milling machine, the series of rice milling machine has great improvement and improvement in structure and performance, advanced structure, beautiful appearance, self-aligning, convenient operation and maintenance (especially convenient for changing), with rice The advantages are high rate, good rice quality, large output, low noise, low power consumption and low rice temperature.

http://www.agriculture-machine.com/rice-milling-plant-machine/
Email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/rice-milling-plant-machine/
Or send me an email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/kenaf-decorticator/
Or send me an email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/6-row-rice-transplanter/
Or send me an email:jerryzhangshuliy@gmail.com

Please pay attention to our website:http://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-3/
Or send me an email:jerryzhangshuliy@gmail.com

Friend, if you are interested, please leave your whatsapp and email, we will contact you in time.

Hello, please contact us if necessary Email:jerryzhangshuliy@gmail.com
http://www.agriculture-machine.com/rice-harvester-combine-thresher-machine/

Hello, please contact us if necessary Email:jerryzhangshuliy@gmail.com
http://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-3/

Hello, please contact us if necessary Email:jerryzhangshuliy@gmail.com
http://www.agriculture-machine.com/chaff-cutter-and-grain-crusher-3/

Ultra-low-volume sprayers are fast, efficient, lightweight, and cost-effective compared to conventional sprayers when controlling flowers, lawns, and crop pests and diseases. The specific performance is:
1. Low water consumption: The ultra-low volume sprayer uses the pesticide stock solution, or it needs only a very low dilution, so it does not need a lot of water.
2, the amount of medication is small: about 100 grams per acre of spray liquid, not dozens of kilograms, or even hundreds of kilograms. Therefore, the labor intensity can be greatly reduced and the labor can be saved when used.

3, even distribution of mist: ultra-low-volume sprayer is not sprayed directly on the plant, but by the wind to make the droplets of only a few tens of microns in diameter scattered and drift, and then under the “micro-flow” around the plant, The mist droplets are evenly distributed on the front, back and sides of the plant leaves and the whole plant. In this way, the killing rate of the pests is higher than that of the diluted fertilizers, especially for some insecticides that have developed resistance. Because the killing function of the pesticide stock solution is several times or even several times higher than that after dilution with water.
4, the use of simple method: hand-held ultra-low volume sprayer spray always keeps the height of the plant about 1 meter above the height. Since the sprayer eliminates the liquid spray head, the liquid flows out when the medicine bottle is lowered. Therefore, before the motor is turned on, the vial should be below and the head should be above. When spraying, start the motor first, then change the position of the medicine bottle and the machine head so that the medicine bottle is on the top, the bottle mouth is down, the bottle body is perpendicular to the ground, and the liquid medicine flows out by itself.

http://www.agriculture-machine.com/sprayer/
Email:jerryzhangshuliy@gmail.com

The inspection before start-up includes mechanical filter, mechanical suspension beam, various components connected to the rice milling machine, etc. The detailed inspection contents are as follows: the filter suspension should be flat to ensure the vertical suspension of the boom, the tightness is uniform, and the wire rope is slack; The suspension beam should be stable; free tools, personnel or other objects above the screen body and the transmission steel cavity; the transmission part can be freely rotated, the bearing must be lubricated; check all bolts, screws, nuts are installed and tightened; all machine covers, The machine door and side seals must be tightened in the correct position and in accordance with the regulations; the feed tube is installed to remain relaxed and not to be distorted.

Before the start of the rice mill, it is necessary to check the correct connection of the electrical parts, and use the vibration table to determine the insulation strength to ensure no leakage, safe and reliable. The direction of rotation of the motor should meet the requirements. Bind the rubber and cable and fix it on the inside of the transmission frame with the drive clamp. When connecting the user, check the connection and fixing. The cable is worn from the hole harness to the beam. Connect the fixed cable to the seat according to the installed wire clamp. On the boom below the chair, then secure it along the motor cable until the boom is connected to the power cord.

The cleaning part after use mainly includes four steps of preliminary cleaning and tempering, usually using three screening machines, two washing machines, two waxing machines, one selector, three suction machines, and three magnetic separators. Two water dispensers to reduce the waste content below 0.08%.

The general process of cleaning part is: descaler – gravity dust collector – wheat storage vibrator – magnetic separator – cleaning machine – rotary sieve – gravity dehumidifier – graded automatic dehumidifier – rotary sieve machine – spray water mill .

http://www.agriculture-machine.com/rice-milling-plant-machine/
Email:jerryzhangshuliy@gmail.com

Two functions of rice harvester machine: harvest and thresh for rice harvester combine thresher machine. Cut the rice and get good rice processed by rice harvester combine thresher machine.

Ride type that people can sit to work, very convenient for farmers,working by diesel engine. Traditional working way will get improve by rice harvester combine thresher machine, high efficiency,the straw will crush, keep into land, harvest rice by rice harvester combine thresher machine, solve the problem of how to process the straw.
http://www.agriculture-machine.com/rice-harvester-combine-thresher-machine/
Email:jerryzhangshuliy@gmail.com

Brief introduction

It is a full-automatic silage baling machine, being equipped with 6.6kw motor. 4500x1700x1500mm is its size, silage baling machine has high speed, that is, 50-70bundles/h. There are 2-4 coated layer, and bale density is 450kg/m3. It bears long storage time due to round shape with film,which can be used for feeding animals. The raw material of hay and straw baler machine can be silage,fresh or dry straws of wheat, rice, soybean, corn, etc.


http://www.agriculture-machine.com/full-automatic-silage-baling-machine/
Email:jerryzhangshuliy@gmail.com

There are three main types of small rice milling machines in China: separate rice milling machines, rice milling and rice milling machines, and air-type rice milling machines.
The split rice mill is easy to operate and has a low price, but the model is aging, and the milled rice is poor, and it has gradually been eliminated.
The rice milled rice machine has good processing quality, but its structure is complicated and the price is relatively expensive.
The spray type rice milling machine has good cost performance, can complete the shelling and whitening process at one time, and the processed finished rice is white and bright, and has become the mainstream product in the market in recent years.

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

No, my friend, the machine has a push mechanism

The rice transplanter is an agricultural machine that implants rice seedlings into rice fields. When planting, firstly, several rice seedlings are taken from the seedbed by mechanical claws to implant the soil in the field. In order to keep the angle between the seedbed and the ground at right angles, the front end of the mechanical claw must adopt an elliptical action curve. The action is done by a planetary mechanism of a rotating or deforming gear, and the advancing engine can simultaneously drive these moving machines. The rice transplanter must have a slippery wheel and a floating design when traveling on the soil. If the seedlings are cut into pieces, the rice seedlings are taken out from the specific seedling box and then planted mechanically.

http://www.agriculture-machine.com/6-row-rice-transplanter/
Email:jerryzhangshuliy@gmail.com

Rice is the staple food of 65% of India’s population. The original form of rice cannot be eaten by humans. It needs proper treatment to get rice. Rice mill is a process that can help remove rice husks and grains to produce polished rice. Rice is rice. The basic primary processed products produced have been further processed to obtain various secondary and tertiary products. The basic rice milling process includes the following processes.
Process
Pre-cleaning: remove all impurities and unfilled grains from rice.

rice destoner machine: Use a stone machine to separate the small stones from the rice.
Cooked (optional): Improves nutritional quality by gelatinization of starch in the grain. Increased milling recovery in off-line and polishing/whitening operations.
Shelling: remove the rice husk.
Crust vacuum: Separate the chaff from brown rice/hulled rice.
Rice separation: Separating unhulled rice from brown rice.
Whitening: Remove all or part of the bran and germ from brown rice.
Polishing: Improves the appearance of the milled rice by removing the remaining bran particles and polishing the surface of the kernel.

Length classification: Separate small and large cloths from rice.

http://www.agriculture-machine.com/rice-destoner-machine/
Email:jerryzhangshuliy@gmail.com

Third, the transplanter handle has poor steering performance
During the actual operation of the rice transplanter, if there is a problem of poor steering performance of the handle, it may be related to the excessive clearance of the clutch on the operating side. The opposite clutch cable and handle should be adjusted accordingly to keep the gap within the normal range of 0.5 to 1.5 mm.
Fourth, transplanter planting chaos

In the process of planting rice transplanter, if there is a phenomenon of transplanting, scattering, drifting and arching, it may be too deep with the water in the field, the surface of the paddy field is too soft or too hard, and the gap between the pusher and the transplanting needle is too large. It is related to the deformation of the claws or the poor shape of the seedlings. If the water in the middle of the field is too deep, the depth of the transplanting should be adjusted in time. If the depth of the field is more than 30 mm, it should be discharged to about 20 mm, or the insertion speed should be appropriately slowed down. If the surface of the paddy field is too soft, move the sensor bar to a soft direction or delay the insertion time. If it is caused by the topsoil of the paddy field, the soil should be re-grounded to the hardness of the suitable seedlings, or the transplanting speed should be appropriately slowed down. If the gap between the pusher and the insertion needle is too large, the insertion claw is deformed or damaged, the insertion claw should be replaced in time, the guide shaft should be cleaned or replaced, and the gap between the pusher and the insertion needle should be adjusted to the standard range. . If the seedlings are easily detached due to poor seedling morphology and poor root growth, seedlings should be taken to remove seedlings and seedlings, and the speed of transplanting should be properly adjusted to avoid the occurrence of cracking of the seedlings. If the seedlings are damaged by the soil quality of the seedbed, the seedbed should be properly wetted before the transplanting, so that the transplanting operation is easy.

http://www.agriculture-machine.com/8-rows-rice-transplanter/
Email:jerryzhangshuliy@gmail.com

Rice milling machine operation method
1.Paddy first goes into machine through vibrating sieve and magnet device ,and then passes rubber roller for hulling .
2.After air blowing and air jetting to the milling room ,the machine can finish the process of cleaning ,husking ,air blowing selecting , milling and polishing in succession .
3.The husk ,chaff ,runtish paddy ,and white rice are pushed out of machine respectively .

Rice mill precautions
1. Before entering the hopper, the brown rice should be checked for metal objects and stones to avoid damage to the grinding wheel.
2. After the whitening is completed, the front rotating block should be pulled out, and the residual sugar in the white room should be cleaned up so as not to affect the accuracy of the sample.
3, the accuracy of whitening needs to determine the number of samples and whitening time from the varieties of brown rice, the number of low-precision samples is 17-18g, the whitening time is slightly shorter; the number of high-precision samples is 20g, and the whitening time is slightly long.
4. When the machine is used for a long time and the high-moisture brown rice is crushed, when the rice bran bonding wheel affects the whiteness, the wheel can be removed by a wrench, and the powder is brushed with a wire brush, and can be used as it is.

http://www.agriculture-machine.com/rice-mill/
Email:jerryzhangshuliy@gmail.com

Mechanized production of rice can greatly improve productivity, liberate a large number of labor, and achieve significant cost-effective effects, improving the economic benefits of farmers’ rice production. Rice mechanized rice transplanting is an important link in the mechanized production of rice. The quality of rice mechanized rice transplanting is directly related to the overall development of rice mechanized production. Therefore, we must attach great importance to the quality of mechanized rice transplanting. Let’s take a look at the following: Common faults and troubleshooting methods for rice transplanters.
First, the transplanter is difficult to start

During the startup process, the rice transplanter may have difficulty starting or failing to start properly. The reasons may be: insufficient gasoline fuel; the spark plug is wet; the spark plug is weak and cannot be properly ignited; the fuel filter of the oil pipe is mixed with moisture or blocked. Remedy: First, add enough gasoline fuel, take the spark plug out to dry, then clean the carbon deposit in the spark plug gap, and adjust the spacing to keep the spark plug spacing between the normal range of 0.7 ~ 0.8 mm; , replace the spark plug; finally, remove and clean the fuel filter, etc.
Second, the transplanter can not operate normally after starting
After the rice transplanter is started, if it fails to operate normally, it may be related to the fact that the rice transplanter is not in good position, the clutch is disconnected or the joint is not flexible. It can be solved by cutting off the main clutch, re-operating and adjusting the shift lever, and appropriately adjusting the tension of the running belt and the corresponding cable.

http://www.agriculture-machine.com/common-faults-and-elimination-methods-of-rice-transplanter-1/
Email:jerryzhangshuliy@gmail.com