₦airaland Forum

lomomike: Type your querry in here: www.nairaland.com/1487612/club-lexus/2.

TANX.

Dear Folks,
Please how can I remove maintenance prompt from coming on after service was done (Lexus Rx 350), the light always blink once the car is started in the morning.

Dear Folks,
Please how can I remove maintenance prompt from coming on after service was done (Lexus Rx 350), the light always blink once the car is started in the morning.

Michel886: Thanks bro! The thread was really helpful

Dear Folks,
Please how can I remove maintenance prompt from coming on after service was done (Lexus Rx 350), the light always blink once the car is started in the morning.

lomomike: Congrts! Follow club_lexus thread I may post somethings for benefit of lexus owners.

Ok Sir,
Thanks a lot, I appreciate.

jimmrozz: Thanks a lot.

bros, thanks a lot, I appreciate, I tried the proceedure again and It work, its ok now. thanks.

lomomike: I'm sorry I don't know anyone who works on lexus.

Thanks a lot.

lomomike: Read and try the second "auto all' power window reprogramming steps I posted. If after following and the windows don't operate, you'd need to call in a specialist in lexus to check it for loose wirings or replacement of bad parts.

Thanks bro,
Please can you help me with any number of someone who can work on the lexus as a specialist. I do not want any body to fiddle wit it.

lomomike: Did you or anyone tamper with it, are the fuse, buttons still working?

yes I belive d fuse button still works because d individual window botton can wind down the window but can not wind up

lomomike: Find someone to help you do this. For front passenger window, you turn your ignition to 'ACC' or start the Engine, and door closed. Let someone assist you press the down button on the front passenger side, as he is pressing the button, you should also press the down button of the font passenger window situated at the driver's door side simultaneously. When the window winds down, you two should simultaneously press the Up button of the same window till it winds up follow the sequence 2 times. Then let the other operator stop and you try controlling the window up/down function that window from the driver's side button to see if it works.

If it works repeat process for other windows affected but if unsuccessful, repeat the whole process again.

bros it's only d front passager window that wind down and up but d drivers side does not wind.

lomomike: If its the power buttons on the door side, it is all power one touch all 'auto all' down/up. It won't work as it is suppose to work if you remove the battery terminal of the car, however you have to reprogram the buttons again to enable them gain the functions.
To reprogram the 'auto all' down/up button to re-function again, do these, close all doors,

While holding d individual door power button (eg, hold right side rear door power button on d driver side and on d passenger side and press down simultaneously until all the glass winds down, den press up till glass fully closes. Repeat step again. Then release buttons. Test the power All button on driver door side for right rear door if 'auto all' function works. If it doesn't, repeat the step again. If it does, repeat steps for all doors.

But the auto glass roll down on the remote control of the car only rolls down the glass and doesn't raise them.

Hope this help?

Thanks bros, but I tried the process, only d passagers side still wind down and up but others did not wind using d auto all botton. pls assist further. May be I did not get d proceedure correctly. d driver side is fully wind down and it doesn't wind up.

I my suppose to hold auto all botton at driver side and d respect bottom for other side e.g auto all botton for left rear at driver side and d botton for d rear window together. plssss

[quote author=jimmrozz][/quote]Thanks a lot Sir,
I appreciate, I will perform and revert.

[quote author=lomomike]Yove posted this before in another thread, but for the sake of this thread (and the issue being a lexus related stuff), I'd post it again.

If its the power buttons on the door side, it is all
power one touch 'auto all' down/up button and it is programmable, but it loses its program which control it as it is suppose to work if you remove the battery terminal of the car, however you have to reprogram the buttons again to enable them regain the functions.

To reprogram the 'auto all' down/up button to re-function again, do these, close all doors, While holding d individual door power button. hold right side rear door power button on the driver side and on d passenger side and press down simultaneously until all the glass winds down, den press up till glass fully closes. Repeat same step again. Then release buttons. Test the power
All button on driver door side for right rear door if 'auto all' function works. If it doesn't, repeat the step again. If it does, repeat steps for all doors.
But the 'auto all' glass roll down on the remote
control fob of the car only rolls down the glass and doesn't raise them.
Hope this help?[
Hello Sir,
Thanks very much, I appreciate, I will perform and revert.

Hello Guys, please I need assistance, my power window is not working well, they can only go down but can not move up except the passager side.....LEXUS 350 2008. please assist.

patttcom: Hello fellow CLUB LEXUS. My tranny packed up. Please how much does a toks tranny ( gearbox) cost here in nigeria. I need to buy one asap. 2001 rx300

Ps: contact of seller will be highly appreciated.

Hello Guys, please I need assistance, my power window is not working well, they can only go down but can not move up except the passager side.....LEXUS 350 2008. please assist.

myjoy08: Presently, Unity Bank offer has been clear. Something is brewing...

Plz not a buy or sell recommendation. Due diligence is required...

@myjoy08,ur contribution in this forum had been immensely wonderful.Please can u throw more light on the Unity prospect as this had been on the car park for donkey years.

ihedioramma: There business is oil, for the deal we are working on it a child that is ten years is not a small boy . am at car park now with kotlass . i day eye gtb at 12, uba at 2.50, oando 250,e.t.c.

@ Ihedioramma, Profit is not the only driver of stock price, there are other fundamentals ----- good corporate governance, future growth e.t.c, you will wait endlessly and will not be able to catch UBA, GTB and OANDO at the other side.

myjoy08: Sir, Are you sure you are right with your projection? Hummmhummm, i wish people selling this Oando stocks sees what lies ahead...(they wouldn't have done that)!

Boss, please can you give us an insight of what is ahead ----------in OANDO

Aks: @jimmrozz - I want to believe you are new on this forum. You can trade online yourself on morgan itrade platform @ morgancapitalgroup.com after opening an account with them. Endeavour to check through discussions on this thread and don't hesitate to ask more questions after

@Aks, Thanks a lot.

mercylicious: @all, I loaded my final batch of oando yesterday at 27.90, dt was arnd 12:30 to 1pm. I just observed dt moost times, price are lowest arnd dt time except for stocks on bid. I log in,go to mkt view, see bids and offer, monitor the most recent bought stocks by the right for a while and see d prices they were bought, once I feel the price has bottomed out, I select the offer with my price, change d units to the units I want and double click too submit.
I learnt this after making a big mistake and buying my ccnn and eterna high. I actually bough at d day's highest price.

Why I loaded the final batch yesterday is dt it has become a trend in oando. They are coming closer to sealing the deal, even if they extend the completion, the price maynot drop to 26 and wen eventually it is sealed, it must pass 35.

Mercylicious, you mean you can buy online urself? kindly throw more light and the link to the site.

myjoy08: My Good Family, I hope everyone is taking one step at a time as we start this new week. I pray may the good Lord be with you, your family, and guide every steps of our way which include our investment and trading decisions. As i stated last week that i will be given out some hints on insurance sector and we can all cherry picks it based on our individual due diligence (Trying to collate the information before i pass it out). Don't let Oando breaking news caught you unaware as it is around the corner (Already completed concerning what i was told presently). And Transcorp might submit there results on or before Wednesday. Watch out for one of the best week ever.

Always Remember you can't stop right now until you fulfilled your destiny. As the scripture stated, You can do all things through Christ that strengthen you. Don't let other peoples' opinion weigh you down, you can do it, you can make it happened, and it shall be well with us!
Peace

Boss,
do you recommend buying for OANDO now, just for us to position early before the train waka far?

Emperoh: If i get you correctly, your check engine light came on alongside the TRAC OFF and VSA light?
If this is correct, you should be running a diagnostic scan on the car to know what the issue with CEL is first of all.
I noticed that with the Lexus, once the CEL comes on, it brings on the VSA and TRAC OFF indicators as well. Once the CEL issue is sorted and codes cleared, these lights go off as well and don't come on.

Again, how do you intend to manually switch off these lights? I hope you don't mean taking off the battery connectors? Doing these will not solve the problem The lights will simply come back on once the ECU resets. Go to a diagnostic mechanic and run a scan, and bring the codes here.

Thanks, I press the VSC botton according to the manual.

lomomike: what did you do before it illuminated those 'christmas lights'?

It happens early in the morning when I started the car, I did nothing, but I only try to switch it off according to the manual.

Hi Folks,
kindly assist, my Lexus RX 350 (2008) is showing VSC OFF, a symbol and a CHECK sign. kindly assist.

hey, this market na waooooo