₦airaland Forum

Praxtech:
Return the engine. That's the best choice you have. Let the seller give you a legit working engine

Thank you for your input.

nakoks:
Sorry about your engine issue considering the vehicle is barely 6 months.I would have suggested you ran a check on the engine to know if it falls under the series plagued with the balanced shaft issues(https://www.mercedesmedic.com/check-my-mercedes-benz-for-balance-shaft-issue-by-vin-m272273/) but since you cant do that cos i doubt you can locate the number without the VIN,I suggest you return that engine to avoid paying for a second engine eventually.All the best(sorry i couldn't spend time to look at it yesterday)

Thank you Boss. Fighting for a replacement, the spare part dealers can be problematic. I'm pretty convinced its a worn out balance shaft issue.

Hello everyone!

I have a 2008 ML350 with a scored cylinder. Mech advised I replace the engine. Toks engine was purchased and after installation error codes P0016 and P0017 came,

P0016: Camshaft Position Correlation (Bank 1 Sensor A)
P0017L Camshaft Position Correlation (Bank 1 Sensor B)

Research says, it could be the balance shaft as the problem is common with M272 engines. Research says a test can be done by setting one of the gears to 305 degrees and checking the holes in both A & B above if they correlates. If they don't, most likely a worn balance shaft.

We all know the one week warranty on this engines, which will be due tomorrow Thursday. The test above have not been done, the mech said it's the timing and that it doesn't really affect engine performance, but I get strong head. I need to know if it's best to return the engine and get another before it's too late.

Biko!

cc
kingreign
nakoks
radautoworks

joefit4gur:
AIN Deal

Mint iPhone 12 Pro Max, 128GB, Gold, FU . BH 90% Lagos.
N520,000.

Call or WhatsApp: O70|6672|35|04

Bump!

Water got into my rear sam and need a replacement fix ASAP. Fuel gauge reads full always. Everything else seems to be working fine.

Part No: A 164 900 48 00.

If you have for sale, please holla!

Water got into my rear sam and need a replacement fix ASAP. Fuel gauge reads full always. Everything else seems to be working fine.

Part No: A 164 900 48 00.

If you have for sale, please holla!

HeavenlyBang:
Isn't the R Class and the W164 essentially the same car?

This is a Toks ML350. How did a Toks ML350 come with a part number for the R350. Most of the part numbers on my ML350 starts with A164 not A251. Hence why I think he didn't change the lock, he repaired the machine gun issue, then dumped a dead R350 part so I would believe he actually made a change.

kingreign:
All these are borne out of distrust.
If you know you don't trust him why go to him?

The part he installed, does it work or not?
I try to avoid folks with these kind of character. Very toxic.

This is my first time with this dude, I am only trying to know if he changed or not. Biko, go easy. The thing is I don't think he installed any new part, I think he repaired the problem, then showed me a R350 part as evidence that he installed another lock.

The rear left door of my ML350 W164 was machine-gunning. When the lock button is pressed, all other doors lock except the rear left door, it gives a machine gun sound as if it wants to lock but is triggered back up.

The rewire said he'd need to change the central lock, when I got back. The part he claimed was removed had a part number of an R350 actuator lock A2517660125, and not a W164 ML350.

Now I'm thinking, he didn't replace the lock, he repaired it, charged me for a new one, and dumped a bad R350 lock that probably has been lying in his shop strictly for this purpose. Now I want to ask: Will the part number A2517660125 of a R350 work for a W164 ML350 model?

joefit4gur:
Hi everyone! Biko, a man needs your help o!

A Toks 2008 ML350 4Matic has just been delivered, and I'd like to know if it's any good (engine, performance etc) and or if the problems are severe or minor. It has 220K miles on it, and brought up the following codes when scanned:

1. P2006 - Intake manifold runner control stuck closed bank
2. P0306 - Cyliner 6 misfire detected
3. P0300 - Random or Multiple Cylinder Misfire detected.
4. System Voltage Low
5. P0304 - Cyliner 4 misfire detected
6. P0410 - Secondary air injection system
7. P0455 - Evaporation emission system leak detected.

Other physical findings:
** Clearing agent bought 0w-40 and poured all in, he said the car had no oil at the port.
** Soot on exhaust
** Fidgety when AC is turned on.
** creaking sound at the rear

* Errors on dash

1. Marker Lamp Front Left and Right.
2. Turn Signal Left Mirror
3. SRS Malfunction Front Left and Right.
4. Brake wear
5. Tire pressure
6. Check Engine

Biko!

cc nakoks biko.

kingreign:
Location of the car?
It needs a competent technician to help fix these things.

Thank you. Mainland, Lagos.

Hi everyone! Biko, a man needs your help o!

A Toks 2008 ML350 4Matic has just been delivered, and I'd like to know if it's any good (engine, performance etc) and or if the problems are severe or minor. It has 220K miles on it, and brought up the following codes when scanned:

1. P2006 - Intake manifold runner control stuck closed bank
2. P0306 - Cyliner 6 misfire detected
3. P0300 - Random or Multiple Cylinder Misfire detected.
4. System Voltage Low
5. P0304 - Cyliner 4 misfire detected
6. P0410 - Secondary air injection system
7. P0455 - Evaporation emission system leak detected.

Other physical findings:
** Clearing agent bought 0w-40 and poured all in, he said the car had no oil at the port.
** Soot on exhaust
** Fidgety when AC is turned on.
** creaking sound at the rear

* Errors on dash

1. Marker Lamp Front Left and Right.
2. Turn Signal Left Mirror
3. SRS Malfunction Front Left and Right.
4. Brake wear
5. Tire pressure
6. Check Engine

Biko!

Good evening,

Does LAUTECH accept the etranscript via ETX-NG for WES evaluation?

anathemiamia:
Anybody else pay for a remarking?

Hey! How did this go? I retook same course, and it still came out with a 38% score. I'm thinking of applying for a remark. Please advise.

Amazon or Walmart or eBay GC needed.

$200 Ebay needed

OR

$220 Walmart Visa needed.

[quote author=repairpalng post=93664285][/quote]Do you have the BN48 for Redmi Note 6 Pro?

[quote author=repairpalng post=93664285][/quote]Do you have the BN48 battery for Redmi Note 6 Pro?

FENZY24:
Pls i need a local vendor i can buy note6bro battery its BN48

Have you found any? I need one too.

Note 9 Pro received! Thank you nurex01

nurex01:
UPDATED PRICE LISTS

23/7/2020

Redmi 8 4/64Gb 60k
Redmi Note 8 4/64Gb 75.5k
Redmi Note 8 4/128Gb 83.5k
Redmi Note 8 Pro 6/128Gb 103k
Redmi 9A 2/32Gb 46.3k
Redmi 9 3/32Gb 62.5k
Redmi 9 4/64Gb 66.9k
Redmi Note 9 4/128Gb 82.5k
Redmi Note 9s 4/64Gb 92.5k
Redmi Note 9s 6/128Gb 107k
Redmi Note 9 Pro 6/64Gb 103.5k
Redmi Note 9 Pro 6/128Gb 113.5k
Mi Note 10 Lite 6/64Gb 138k
Mi Note 10 6/128Gb 205k

Call/WhatsApp:08079756572

We are just a DM to you. Thanks

Customer's Satisfaction is our Watchword. .

MB ML 350 or the RAV4 (‘06 upwards)

As at May 10 2020 - After selecting your language, from the main menu - , 4, then, 2 then 9.

Amdman, biko easy o. With Corona everywhere. If you need to take a break and stay home, please do.

eherbal:
50k

55K and it's yours.

Good morning

Good morning

Bump!

Bump!

Good evening