₦airaland Forum

dennis201:
Any genius here that knows how to buy engine?

jceesquare:
Sir, my argument is not with synthetic or mineral oil but on the oil weight.
There are several mineral or semi synthetic oil with 5W-30 oil weight.
I'll only advise and insist my customer uses a synthetic oil if it's required by the manufacturer.

Bashak:
They scanned the car and it was not showing any faults or errors.
Attached was the picture he sent me

samuelkingz:
Good Afternoon House, Please my radiator is having issues. Its not leaking but the water dries up and i have to put water daily and stop to refill at intervals. what could be the cause cos i was using radiator coolant but as it dried up i replaced with water to understand what happened. Please kindly help.

eightsin:
It's not a hissing sound.. more like buhbuhbuhbuh sound. The sound is coming from inside the dashboard. A technician said dirty must have entered my compressure but I can't see how that was possible

jceesquare:
It's obvious you guys didn't understand my question.
Running a 20W50 in any modern car is a slow poison that would eventually kill it off some day.
Asking which brand of 20W50 is more like asking what brand of poison to take.
Make una leave all this story of engine smoking and all that alone.

masseratti:
My 2010 Porsche cayenne decelerates when I want to climb bridges or hill..it drags when on highspeed I have tried almost everything please can anyone recommend a mechanic in abuja ?who can fix it or what can be the problem please.

jceesquare:
What other damage can he possibly do to the engine running on 20w50?

Ugo1986:
Removing catalyst from the car, is it capable of causing the TPS censor to mishehave,? Because these no whole thing started when I had an issure with my catalyst, which the condition demands that it must be removed

kola42:
Good evening, gurus in the house. My gearbox (yaris 08) was leaking oil, the gear master said it was gearbox oil pump and converter. Replaced the oil pump, but he couldn't get the converter at ladipo. Can the *converter* be repaired??
Because no sign its spoilt, pls help

akusucymon:
I have a 2005 avensis wagon with 1AZ engine (down nozzle) with an abnormally high fuel consumption. I use 30k fuel from Benin to warri now. It has a meter on the dashboard that indicates fuel consumption per 100km.formerly it use to be between 7.5-9 liter per 100km. But now it reads as high as 16 - 17 liter per 100km. I have done several computer scan which makes me doubt the ability of the machines and operators. Changed plugs, coil, air flow, injector head etc.. please anyone here has experienced such? If so what caused it and how and where did u fix it. Tnks for your help in anticipation

michealekene:
Hello house

What’s the difference between GLE43, GLE 450 and GLE450 AMG 2017/2018 models in terms of adaptability to Nigerian roads, ease of use by Nigerian owners, handling and comfortability(SUV version not the coupe).
Also what can you say about the reliability as compared to GLE 350 of the same year.

chubaba1990:
Please house is it advisable to drive my sienna without ABS module, my gear selects well and my braking system is fine?

jceesquare:
Still battling same issue?
Tell am say make him check weda light from brainbox reach the wires, make him check weda the wire cut somewhere, and also make him check the “earth wires”.

jydeayanx:
Good day to you, please what could be wrong with a Toyota Hilux that makes it not to ever accelerate beyond 80km/hr? It used to accelerate beyond that before, however, the Top Cylinder, Crankshaft, clutch disc and Lease bearing were all recently changed, then after all these repairs, it does not accelerate beyond 80km/hr, even after engaging all the gears up to the 5th gear.
Thanks in advance

Veryuglyme011:
I was told brand new isn't so good that you can't return it if it doesn't work well.…so I bought direct Belgium but the pump I decided to buy a brand new one today

XPaul:
Hello everyone,

My Honda Accord 2010 is showing P0135. I replaced the O2 sensor with a brand new O2 sensor, still the code is still showing and my fuel consumption seems worse than before.

Also my RPM is high.

What can I do?

Veryuglyme011:
Please I changed my steering Rack and steering pump on my Toyota corolla Altis 2006 model but I'm still hearing a whistling sound when I fire the car and the steering is very hard and turning on its own...plesse advise me on what to do

twinskenny:
My Toyota 2004 matrix transmission won’t engage in both drive and park… was driving yesterday and I try to put in park but car still continue moving … won’t enter reverse either… the knob is just moving freely…

Now I have parked the car and it won’t start again


Hope someone understands my explanation? Am sorry

akajos4real:
Greetings to All,


My Toyota Sienna 2004 has a 13pin gearbox issue immediately after I bought it.
Was told the gearbox had to be changed which I paid and was done.
Travelled with it to Delta State and present the car can move forward with fine gear selection but would not select the reverse gear.

What may be the problem? I need to know what the issue is to enable me fix it and return back to Lagos.

Is there a chance that changing the 13pin to 10pin gear will be of any help?

alaricsaltzman:
Hello house, please I need help with a nagging issue.

My Honda CRV 2010 has a P0303 error that has refused to disappear for months. I've switched and replaced the plugs, coil and fuel injector (nozzle). Once I clear the error code, the car returns to normal and fires well for a few days after which the code returns, causing the car to jerk and rough acceleration.

Please what could be the issue so I can resolve it once and for all?

cc: kingreign, luvinhubby, jceesquare

SpeedRacer:
Good day house,
Please i need help in sourcing for tokunbo hhub and shaft corolla 2010.

Ive bought more than 6 hubsand they keep spoilingbdame with new shaft.
I have just been advised to switch it to Conplete tolumbo for both that the new parts are the reason for the cinstant failure

ShitStain:
Nigerian used. Engine is in excellent condition. Only major maintenance i had to do was radiation tank replacement as the old one was leaking and gasket replacement as it got damaged during replacement of the radiator tank
So mobil 1 5w 30 it is?
Any cheaper and reliable alternative please?

Baso2019:
Please I need help.
My 2000 Toyota Camry won't go into gear, when you shift it will indicate drive or reverse but won't move, no matter how much you rev it.

Sometimes it will pick and then disengage immediately

ShitStain:
Good morning.
Please what engine oil would be recommended for a Rav 4 2004 model that currently has around 202,000 miles on the odometer?

ShitStain:
Any assistance please?

Sankabson:
I serviced the valve body yesterday, still having the issue. Well! Shift solenoids isn’t replaced. Sir, could recommend anywhere I get this done. Ibadan would be much preferable. I can as well go to Lagos.

samsard:
Low idle speed can lead to vibrating car. Anyway, it's probably some other issue.

Sankabson:
Good morning House,

I am driving a 010 Toyota Camry. But have been noticing some issue as regards the Gear. Whenever put the Gear on D ( Drive ) it delays few 10 - 15seconds before responding or shifting to drive. But respond swiftly to other Gear levels. PRN ..

But I do noticed it respond a little bit we'll in the morning, when I'm just moving. After a while it starts again.



- I have changed the Gear Fluid to make sure it's up to gauge. Still having the same issue.

- I have asked few technicians here in Ibadan, some are saying it's electrical problems and issues like that. I went to be sure before engaging anyone to avoid any error, as Gear is expensive now.

I'll appreciate your help Sires)Mas. Thanks in advance

Modify:

I scan the Transmission, here's the code.

P0741
P2757

Tiztonio:
I have this toyota camry 2011 with venza engine 4 plug. Im having issues with the adjuster. My engine produces this particular rattling sound especially when I engage the car on drive/reverse and gets worse when I turn on the Ac. I was advised to change the adjuster(pulleys) which I did. Unfortunately, it changed nothing. I still hear the sounds. Any advise??

samsard:
Maybe your idle RPM is too low?