nurey:

good to go it shares part with Hyundai Elantra

Wow. Thank you very much sir

nurey:


depends on what year you are looking at. but the parts shouldn't be expensive and out of reach

2011 sir

GAZZUZZ:

the 1987 cerato is cheap to maintain

This particular one is 2011 model

GAZZUZZ:

the 1987 cerato is cheap to maintain

This particular one is 2011 model

nurey:


it's a good vehicle especially the us variant known as forte

Thank you very much sir. What about the parts, are the always available? And how expensive are the parts?

nurey:

Good morning sir. Please, how reliable is kia cerato? And, are the parts always available?

GAZZUZZ:


.

Good morning sir.
My friend wants to but a kia cerato. But someone said the parts are very expensive and not readily available.
Please, how true is this sir.

KingJahzmineKing:
Drop your WhatsApp number if you're interested

08157500044

gbenga4sure:
I've added all

08157500044

Noted

Dinero018:
Any guy reading this post will impregnate a lady before the end of this year If u insult me it will be twins ��

Bros, please, let me insult you

Criis:

Sent

labodeonline@gmail.com

Well done boss. I love your works

Used 3000w famicare inverter for sale

dacanv:
In some parts of the nation, this is food. For my villa, if you kill it, it's a sacrilege. Personally, I think it's a majestic creature and would love to own one as a pet

Good luck to you

Strongbest:




Heyllo Sir, yes, increase the nitrosol for thickness and increase your SLS and CDEA for more foaming effect or ability.



Thanks

Thanks so very much sir. Remain blessed sir

Strongbest:
METHOD OF PREPARATION
-Dissolve the caustic soda with 1 litre of water and allow to stay for 30 minutes to 1hr or over night.

-Dissolve soda ash in 1 litre of water and allow to stay for 30min/hr or over night.

-Get your sulphonic acid, pour inside an empty bowl, and add your perfume (fragrance) to it and the texapoon, then add like 3-4 litres of water and stir very well for about 5 - 10 minutes.

-Dissolve the SLS with 2 tin milk cups of water

-Dissolve the STPP with 2 tin milk cups of water also

-Get the Nitrosol but if it is C.M.C you’re using, make sure it is dissolved 2 days to the preparation of the soap with 4-5 litres of water. If you are using Nitrosol, it's used instantly (as in, no need soaking it down).

PREPARATION
-Get the Nitrosol that has been dissolved in water or the C.MC. that has been dissolved 2 days to the preparation of the soap.

-Add the dissolved sulphonic acid, texapon and perfume to either the Nitrosol or C.MC depending on the one you are using and stir very well.

-Add the already dissolved caustic Soda and stir very well.
Add the already dissolved soda ash and stir properly.

-Add formalin to the content and stir properly.

-Add the dissolved S.T.P.P and stir.

-Add the dissolved SLS to the content.

-Dissolve your colourant in water and ensure that the colourant is completely dissolved, then add it to the solution and stir thoroughly.

-Add some quantity of water to the mixture, depending on the thickness of the mixture.
Leave the mixture for some hours or preferably till the following day and then package for use or for sale.

Good day sir. Please can I increase the Nitrosol to make it very thick? Or, what is the best way to make it very thick and foam well.
Thanks sir

Strongbest:






Heyllo Sir, I probably didn't because I have said it many times that we should always post any question related to things treated on this thread here.

The answers will help others that may want to ask the same questions.

More also, I noticed a lot of us don't like going through the thread. Well, I understand because the thread is so long.

However, I assure you there are alot of things you will gain here if you can just scan through. Most questions asked have been answered here.




Thanks

Ok, thanks

Strongbest:
Meanwhile, check your mails.

Thanks

Good day sir. Thanks for your selfless service. Sir I am yet to see your reply on "thick liquid soap"
Thanks sir

Good day and happy sunday to you all. Please, I am having problem with my srt4950 decoder. I upgraded the software to version 4.18p some days ago. And a day after the upgrade, I was watching when all of a sudden "no signal" popped up. I checked my dishes, they were all firm with signal on other decoder. I removed the diseqc and connected straight, some frequency have signal while others dont. On 28.2e, 12525 v 30000 does not have signal, others have. On 16e too 12522h30000 does not have signal too. 10804h30000 and others have.
Please what could the problem be and the possible solution. Thanks.
Happy Sunday

victorigwe:



standing fan are in runner, and 220v compatible, i don't wind that,
u can follow the brushless for, but u will have an out put of 4 after winding, the winding teeth is at the position of magnate and the shaft is at inside, having a two ball bearing, it can only work with a capacitor.

Thanks

GRACEGLORY:



I'm sorry sir, I don't.

Alright, thanks

GRACEGLORY:


0803 054 6462

Good day sir. Do you repair tube televisions too?

Following. What about standing fan coil rewinding?

Crap. Very boring

ceejay80s:


24v setup is good but the problem is u must have 2batteries, na for big men wey get money, and if u want to increase ur battery,u must buy another additional two batteries, na money dey disgrace man pikin,
I am not sure changing the panel to 12v panel will work cos the coil inside the ups is 24v coil, I will advice u to go to Oshodi arena and get a very good 1500 12v ups or take urs there and swap but u go add money to swap although 12v and 24v ups are same price there

Fortunately, I reside in Ondo state