Good Day


We will change Naira to Euro , GBP or US dollars.

Need like about 6000 euro.


Any one want to change money ?

Best Regards Oktawian

www.mypawcar.com

@ Systrom where are You located ?

Good Day


We will change Naira to Euro , GBP or US dollars.

Need like about 6000 euro.


Any one want to change money ?

Best Regards Oktawian

www.mypawcar.com

here more pictures

We have next one -
Mercedes Benz C class W202 model for one of our client. Avarage price for "trash" w202 benz is +- 1000 euro, this one cost 2000 euro, but car is 1999 year model , is from 2nd owner, has original milage 140 000 km !! Has no rust !! and this model is known from rusting a lot !! Of course has automatic gearbox and 2.0 petrol 136HP engine, that is relaible and cheap to fix. Has AC system, and looks really clean for the age. As a 22 years old car . needs some care :

-Rear axle has an oil leak
- Ac needs to be regased
- has a dent on the front wing


Here are some pictures :


Regards Oktawian


www.mypawcar.com


.

One person payed deposit on the daf.

Reserved till next week.



Best Regards Oktawian

www.mypawcar.com

Good Day


We will change Naira to Euro , GBP or US dollars.

Need like about 6000 euro.


Any one want to change money ?

Best Regards Oktawian

www.mypawcar.com

Still available

Up

You want to tell me, that you want - up to 11 000 usd for this pice of trash ?!


Usd @ 565 naira

price ?

Here is how the Owner of Daf 1300 thanked us for really good truck, after they took it off from orange DAF 75

AS well some pictures from German port.



Best Regards Oktawian

www.mypawcar.com

After some time due to covid bullshit, truck is already in Nigeria - Shaki, Oyo state.

Still for sale, top condition, ready to work any time. more info, please let me know.


Best Regards Oktawian

www.mypawcar.com

Long time no see, due to covid we had "small" delays, anyway - now we are back


In the meantime, our daf get new coolant radiator, new engine front oil seal and has been shipped to Nigeria. Already in Shaki, Oyo state - ready for new buyer.

Here some photos from shipping and first refuel in Nigeria and taking Daf 1300 off the our daf by the owner.

We were busy, but one set is ready for shipping.

New order and stock is here, so next week will try to add some photos.



Regards Oktawian


www.mypawcar.com

Aa we spoke on whatsapp about VR6 engine with automatic. Will write it here again for others.


So VR6 engine is a strongest petrol engine available in VW T4 / Transporter. It's really expensive to maintain and person who is doing service on this type o engine needs to know what he is doing. No shortcuts here. Even with manual gearbox, this engine is burning lots of fuel. Automatic gearbox is burning extra 1-2 l of petrol per 100km.

If the bus is for work, best option is to get 2.5L petrol or 2.4 Diesel version with long chassis and manual gearbox. 2.4 diesel has not any turbocharger, like in 2.5 TDI diesel. 2.4 diesel It's simple to fix, normal injection pump with injectors so no worries. Version from 1996 has dual mass flywheel and that is all. It's simple and really strong engine.


Regards Oktawian

www.mypawcar.com

Update on both dafs :

Due to new shipping rules, Daf 75 will be shipped with daf 1300 as a one set.
Will write about it later.


Regards Oktawian

www.mypawcar.com

UP

The truck will be shiped to Nigeria till the end of the month.

Will get back to You to check the prices.



Regards Oktawian

www.mypawcar.com

up

more pictures

And more pictures

Here more pictures

Truck is after big service, you can read about it here : https://www.nairaland.com/6458780/www.mypawcar.com-trucks-cars-repair-before


Here are new pictures :

Price is 10 000 euro, truck is ready to ship any time.

Regards Oktawian

www.mypawcar.com

Update 1999 DAF 75CF

Today I found some time to work on Daf, the weather was nice so no excuses.

We took off the additional headlights and the snow plow attachment. There is no snow in Nigeria, so no need for it Now it looks like Daf again.

The safety 4-circut valve started to leaking air, a little but still. This valve is the main air source for the braking system, and we had one in our warehouse, so why not put a new on? It is original Knorr part but after refrubishment. Same quality as OEM part, but much cheaper. The brakes will now work as they should and there is no risk of wheels locking up due to air shortage.

There are still some small things to change/ fix and we will do it in one shoot, will make some pictures of them and post next week.

Want ot finish the DAF75 and make the new technical raport till end of next week, cos now we are waiting for container for Daf 1300 to put some things inside and ship it to Nigeria ASAP.

Lets see what next week will bring.

Regards Oktawian

www.mypawcar.com

Update 1999 DAF 75CF

Today we had little time, so we fitted only tires - on right site middle axle. Now they are the same type and have a lot of tread on them .

Remeber to always use torque wrench when bolting wheel nuts !! Daf's Service Manual says we need to bolt them to 700NM, but due to age, even after thread cleaning we bolted them to 750 NM. Re torque the wheels nuts again after 20 - 40 KM !! ALWAYS !!


Regards Oktawian

www.mypawcar.com

Update for 1999 DAF 75CF

Today we installed refrubished Air dryer unit, after checking for air leaks in the whole brake system, we found out that one of the brake chamber on 3th axle is broken and it's leaking the air. It was parking brake part of the chamber so it's need to be replace.
Once again ... dealer price for brake chamber is 350 euro plus tax , OEM part WABCO costs like 220 euro plus tax , due to fact only parking brake part of the chamber was broken, we bought the chamber that costs like 120 euro, but has diffrent foot brake part. We took from old one - metal rod as well metal cup and put to the new brake chamber, we sand blasted old parts and re paint them to prevent corrosion , like that we saved 230 euro and still have new brake chamber that fits Daf like original part.

Now Daf will be safe to drive with no worries that one of the chamber could block the wheel.


Regards Oktawian

www.mypawcar.com

Just to say... all trucks in first post are from Poland

It does't matter from where the truck is, what is really matter is technical condition and price. Cheap trucks comes with lots of wahala.


Regards Oktawian

Now lets back to 1990 Daf 1300

We picked it up yesterday, it's really like new truck ! Milage is silly ! With no back we easly could do 120 km/h !! 500 km way back was really qucik It's 1990 and it has ABS system !! First time sow something like this in any old truck.

Pictures will tell You more !



Regards Oktawian


www.mypawcar.com

Good Day

First of all - no one is insulting anyone ! What i am writing is based on my and my client's experience. So no empty words. Ofc not all mechanic are like that, but for now I did not meet them, and for sure was not so easy to find them either...


If you did not never ever met any kazeem - good for you. I did. Engine in my peugeot 406 2.0 petrol with silver cover - sudenly stoped on the way from Lagos to Shaki. My quick diagnose - alternator belt shreded and get into cambelt cover... cambelt snapped. My thinking was - valves must be broken for sure, so the only option is to take it to the mechanic and change engine head / valves. No tools on me, so needed to rely on others mechanics.

They brought "new" used engine head, put it on, on the old head gasket as well used old bolts... They told me that is fine and engine will be like new. I knew that this will not happen. Then engine was working like diesel, missed spark time to time. Told them that this is a "no no". Answer was quick and costly - new engine ...

Don't remeber well now, but prices were form the space too.

In the end, sold the car with new engine head and lost lots of $$ on it.

So yes, there is " lack of good and honest Technicians" in Nigeria.
There is plenty topics here on nairaland about people had some wahala with their mechanicks and looking for help on forum.


I had lots of meetings with really good people about trucks fixing, hours of talking. They showed me thier "know how" and i've told them how to cheaply make it better.

Here are some pictures.

This topic is not for advertasment, is to show how we can fix things not in dealer price and still get the same result. I wish all Nigerians could afford to always buy new cars and trucks, but due to covid bullshit and poor economy, it's not happening.

So the only option is to buy the best trucks in the clients budget, in this we can help. It's not only about the money. Satisfaction is most important.



Regards Oktawian

www.mypawcar.com

Update 1999 Daf 75 CF

Today we recived metal cable for rear axle. It is like original DAf part but for 1/4 dealer price !
I
Metal cable installed and ready to go ! We have also air dryer unit who was refurbished by pneumatic company ! It has also new air filter. Will be waiting for time to bolt it in, maybe on monday we will do that.


Regards Oktawian

www.mypawcar.com