dru23:


Below is the USA version..... The part number is very clear (pic) 1.......

Yours pic (2) ..... It is not very clear at all .. Try and match the exact part number to (pic 1)

Since yours is not USA spec .. The USA spec might not sit up well in the engine base ... The space might be too tight to sit .......

Like I said early on with a Hyundai Tucson that was bought brand new in Nigeria .... We were able to get a USA spec ... But when it was time to replace with the Nigerian bought Tucson , the space was too tight and the mechanic had to construct a space for it .. It worked well ..........

If you are willing to do it and give it a try . I can get it shipped for you under 200k ... I will be loading again in two weeks time ........

dru23:


USA spec cars has better safety features... And yes have heard of them ..... I believe the JDM engine are the ones more than likely are sold by Dana Motors......

Now the reliability of the USA spec engine is actually above average.. What else do u want from a car , plus safety is included ..............


Most of these Hyundai sold by Dana Motors in Nigeria will not pass the USA safety test..

Now back to the guy looking for a compressor .. If I decide to get him a a/c compressor brand new from the USA . chances are it might not be compatible or fit properly with his 1.4liter engine .....

Now from experience few years ago .. A customer requested for an a/c compressor for her 2014 hyundai Tucson .. She bought the car brand new in Nigeria from Dana Motors.........
We had to match the compressor part number to the ones in the USA.. Once the part was ordered the only issue was that the compressor could nit fit properly .. A mechanic had to construct additional space for the compressor to fit properly.........

Keep in mind same car , same year, but different engine

zabimaru:



I have a great job thanks.


Have you paid that your ex-driver his complete money btw? You cannot be this great a man as you claim and be owing someone change and then because you couldn't keep up, you decided to place your very own strain of "powder" in the vehicle to try and implicate him. Oni Gbese, Andru the substance user.

Even the job you said you know how to do, you are just as naive as an okada rider in the cockpit of a fighter jet.
JDM, jonzing "coke" user says it's DANA



You will do better as a Bell boy in a hotel, trust me!

kingreign:


You’re wrong JDM isn’t sold in Korea. Rather KDM is sold in Korea. What we have here in Nigeria is basically the stripped down fully built unit export product.

dru23:



The debate was that the USA spec is better... Now the export version sold in Nigeria , can it compete favourable with the ones built for the USA market.....

You need to understand that the USA Auto market is a very competitive market .

Due to the competitiveness foreign Auto manufacturer have to make sure they are building the best cars to compete in the USA.. They are sending the best of their best for the USA market....

This is why u hear that certain cars are been discontinue in the USA market, but they are been sold or even doing better in other countries..

So many factors comes to play in this scenario.. But it also boils down to money and profitability of the vehicle ....


Now we do have a some exceptions to the rule .. .. BMW , Toyota, Benz .. These car manufacturers do make certain cars or better yet assemble cars in the USA . They have factories all over USA. And also they are import into the USA .......

The cars that are imported to the USA compare to the ones assembled in the USA . They are of better quality engine wise and have less recall issues ...... The reasons for these is that it is easier to get parts and monitor quality control...

The ones assembled in the USA their parts are usually source from Mexico and other near by countries .. This is why at times you see alot of recall on certain cars ..........

zabimaru:



I have a great job thanks.


Have you paid that your ex-driver his complete money btw? You cannot be this great a man as you claim and be owing someone change and then because you couldn't keep up, you decided to place your very own strain of "powder" in the vehicle to try and implicate him. Oni Gbese, Andru the substance user.

Even the job you said you know how to do, you are just as naive as an okada rider in the cockpit of a fighter jet.
JDM, jonzing "coke" user says it's DANA



You will do better as a Bell boy in a hotel, trust me!

dru23:

buygala:


Don't let them bully you Bro

Simple question you should have asked them is after considering, all the JDM, EDM, KDM, even BDSM bullshit, ceteris paribus, will a Hyundai bought brand new in Nigeria and made for the Nigerian market be of better quality than a US spec of same model?

All the plenty ranting, tell them to choose between a Nigerian used Dana Hyundai and a Nigerian used US spec Hyundai and watch them shamelessly go for the US spec... For them a car being bought brand new in Nigeria is a reason to gutter bargain a Nigerian used vehicle..even if it's working optimally

Many of them run away from buying even Hondas bought brand new in Nigeria as if it has leprosy....Talkless of Hyundai

If Op can't find a lasting solution for his Car AC, he should kuku wind down when driving and enjoy the free fresh air that God gives.. That one no dey burn compressor .. Only Major problem he might have is that driving without ac to defrost his windshield when it's raining will be very stressful

Blessingonye:
Team, my 2017 Hyndai Accent 1.4 liter AC began to have faults. I felt it was just change of gas but when I went to an AC mechanic he said it was Compressor and Condenser damage and I had to change it.
He searched for the compressor and brought on compressor he said was manual type and fitted to the car using what looked like an Iron made slab as the base to make it hold onto the compressor space. After he change the condenser. I paid N90k for the service. But after test driving I found out the car draggs and began to consume much more fuel. Looked like a heavier size compressor was used.
I return it and he said he would change the compressor. He now used a second hand one that he said was removed from a Corolla to fit into the space with another iron locally constructed place as a base. But till now, the vehicle drives different. It seems like it's carry a heavy load and the engine sounds havier when I accelerate.
Please what can be the cause. The car I brand new and I have never had any issues outside routine service and it's frustrating.
Please can any one assist. Does anyone know the cost of a direct replacement of the compressor and if there is another solution.
The original one was a n automatic compressor this is manual. Is there any difference?
PS- I stay in Port Harcourt.
Thank

buygala:


Don't let them bully you Bro

Simple question you should have asked them is after considering, all the JDM, EDM, KDM, even BDSM bullshit, ceteris paribus, will a Hyundai bought brand new in Nigeria and made for the Nigerian market be of better quality than a US spec of same model?

All the plenty ranting, tell them to choose between a Nigerian used Dana Hyundai and a Nigerian used US spec Hyundai and watch them shamelessly go for the US spec... For them a car being bought brand new in Nigeria is a reason to gutter bargain a Nigerian used vehicle..even if it's working optimally

Many of them run away from buying even Hondas bought brand new in Nigeria as if it has leprosy....Talkless of Hyundai

If Op can't find a lasting solution for his Car AC, he should kuku wind down when driving and enjoy the free fresh air that God gives.. That one no dey burn compressor .. Only Major problem he might have is that driving without ac to defrost his windshield when it's raining will be very stressful

zabimaru:



Honestly, this job ain't for you.
Where is the part number location on the compressor in pic1?

After sniffing stuff you think the whole world revolves around your high yellow a*s**s and you can dabble into any profession and do well?

dru23:


Below is the USA version..... The part number is very clear (pic) 1.......

Yours pic (2) ..... It is not very clear at all .. Try and match the exact part number to (pic 1)

Since yours is not USA spec .. The USA spec might not sit up well in the engine base ... The space might be too tight to sit .......

Like I said early on with a Hyundai Tucson that was bought brand new in Nigeria .... We were able to get a USA spec ... But when it was time to replace with the Nigerian bought Tucson , the space was too tight and the mechanic had to construct a space for it .. It worked well ..........

If you are willing to do it and give it a try . I can get it shipped for you under 200k ... I will be loading again in two weeks time ........

Blessingonye:


See new pics

Blessingonye:


See new pics

dru23:



I went back and search .. This bellow is for a 1.4l engine. I can call the seller to verify that it will fit your car.....

Total landing cost is 190k naira

Alfred74:
Guy,as you make mouth reach,1.4 engine still come dey the yankee?1.4 that is substandard,can never be made for the American Market etc?Onye ara

aieromon:


Ignorance is bliss

dru23:



I went back and search .. This bellow is for a 1.4l engine. I can call the seller to verify that it will fit your car.....

Total landing cost is 190k naira

Blessingonye:


Hi. The numbers on the old compressor is very blurry. Seems like they never wanted anyone to know what was written.

Attached is a seeming clearer pic of the sticker and a picture of the old compressor.

aieromon:


The compressor was manufactured by Doowan for Kia Rio (2011-2017) and Hyundai Accent (2011-2018) for the 1.1, 1.4 and 1.6 litre engines. It is compatible with all the models regardless of the market.

aieromon:


The DVE12 compressor is used on 1.1, 1.4 and 1.6 engines for the Kia Rio and Hyundai Accent.

Source: the compressor manufacturer, Doowan

GAZZUZZ:


Why are you schooling oga compressor seller

dru23:



I went back and search .. This bellow is for a 1.4l engine. I can call the seller to verify that it will fit your car.....

Total landing cost is 190k naira

dru23:



When looking for parts, it is in ur best interest to go by parts number. You try and match part number from whatever part u want to replace........ You need to go back to few pages . to understand what am saying....


Now few years ago . A Nigerian Hyundai Tuscon 2011 0r 2012 can't recall the exact year. The Tucson was bought brand new from Dana Motors. The a/c compressor was bad and needed replacement.

Keep in mind the Dana tuscon is a different engine from the USA spec .. So I was able to match the parts number from the Dana Nigerian Tucson to the USA parts.. It was the exact number.........

During installation the USA spec could not fit exactly in the engine bay area . it was by an inch or so and it was too tight tob sit in the engine bay area . so the mechanic was able to construct a small space for it to fit.. And the a/c worked ...

My theory here is because the Dana Tucson engine size is much smaller than the USA .. So it was an issue of having enough space. Again both a/c compressor have the same part number.......

So now am trying to prevent the same issue from happening to the 2017 accent....

Again young man, when looking for parts you don't by the compatibility bullshit.. You take the old part number that needs replacment and match it with the new replacement . this method will leave no room for errors ........