The petals are flat and are not perfectly parabolic.In addition,the mesh is 'porous' to microwave @ certain frequencies.

For example,@ 12.2GHz and 12.5GHz,the average diameter of the pores should not exceed 2.4mm and 2.3mm respectively.

Thus mesh dishes perform poorly @ fringe receptions.

blexxonmak:
@ify4king. Mesh dishes-the ones sold in the markets-are designed specifically for C-band reception.

Thanks for d response, I asked because my uncle have a 2.4m mesh dish lying idle and someone once said its an abomination in FTA. So I wanted to be sure if it can track IS20 b4 going ahead.

Yes it is perfect for IS-20/C.

blexxonmak:
Yes it is perfect for IS-20/C.

Thanks a million

kingsaha:


dealer and a seller please

You are not one. Do you give guarantee on any product you sell?
How much do you buy these decoders in cartoon?
I hate joining words with people.
Good morning forum.

Ya am not using strong decoder but am using zuku HDMI mpeg 4 decoder

fembrous3:
OR #50 ETISALAT.

bro's mi, weldone. pls can u elaborate more abt this eti stuf?

graphicicon:
@excelJ, there is a problem on that TP concerning audio and video, if you are using other decoders that are not strong decoder model, the audio will be skiping and there will be a break on the picture in 3 seconds, except Qsat decoder, again there are other strong model that does not handle the problem of that audio are:
srt 4935, srt 4950, but the worst is 4935, the picture do freeze while the audio do have eco noise sound, just 2 days ago, am seeing 4922A that was handling it very well, is now having issues with some channels like Aljazera, KTN, the audio is just skiping, i realised that there must be a problem with their audio and video broadcasting format, GURUS IN THE HOUSE WHAT ARE YOUR TAKE ON THIS ISSUE?

It performs better on Decorders with .stb file like 4922 etc than those that use .bin file like 4950 etc. The former has proven more adaptable than the later.

fembrous3:
ZERO U CAN GOOGLE IT. DSTV WOUNT SHOW EPL IN NIGERIA NEXT SEASON.BUT TO OTHER AFRICAN COUNTRY.

since you brought the information kindly give us the website

All, am happy to inform this honourable house dat I successfully launched my own what's app group, due to pressure from friends on this forum where the likes of the founding fathers of fta and the up coming super guys will be there. e.g Obnelly, butonday, Badaru, olason, Umassor, blexxonmark, etc i will also extend invitation to some of my Ogas here too and to those who are willing to read, do research, and also contribute in there own little way to the success of the group, They know themselves. Am still here too, so wat ever input I have will drop it here as well. This group is specially for die hard fans of FTA and which will b strictly by invitation where matured minds and people with ideals, solutions, expertize will gather in one place and exchange information, tutorials, diagram, pictures, photos of installation of various sizes of dishes will b posted there. Thank your for Understanding.

@Olason pls it would be of great pleasure to me if you can add me on your whatsapp group 00233506353212
Thanks and God bless u

graphicicon:
@minirBK, tweak ur lnb to 5 0clock or 10 0clock, make sure your signal quality is up to 80% or more on 12.015 v 27.500 before you blind scan to get first service and etv capetown

.

morning peeps I hit 81 on 12.015 v 27500 after blind scan yet no 1st serv & etc ct. pls I need help o. but its red on 12054 29950 what can I do pls.

olason:
All, am happy to inform this honourable house dat I successfully launched my own what's app group, due to pressure from friends on this forum where the likes of the founding fathers of fta and the up coming super guys will be there. e.g Obnelly, butonday, Badaru, olason, Umassor, blexxonmark, etc i will also extend invitation to some of my Ogas here too and to those who are willing to read, do research, and also contribute in there own little way to the success of the group, They know themselves. Am still here too, so wat ever input I have will drop it here as well. This group is specially for die hard fans of FTA and which will b strictly by invitation where matured minds and people with ideals, solutions, expertize will gather in one place and exchange information, tutorials, diagram, pictures, photos of installation of various sizes of dishes will b posted there. Thank your for Understanding.

nice one boss， kindly hook me up with dis number zerosevenzerosixthreenineoneninefourfoursix， tanx

olason:
All, am happy to inform this honourable house dat I successfully launched my own what's app group, due to pressure from friends on this forum where the likes of the founding fathers of fta and the up coming super guys will be there. e.g Obnelly, butonday, Badaru, olason, Umassor, blexxonmark, etc i will also extend invitation to some of my Ogas here too and to those who are willing to read, do research, and also contribute in there own little way to the success of the group, They know themselves. Am still here too, so wat ever input I have will drop it here as well. This group is specially for die hard fans of FTA and which will b strictly by invitation where matured minds and people with ideals, solutions, expertize will gather in one place and exchange information, tutorials, diagram, pictures, photos of installation of various sizes of dishes will b posted there. .

pls hook me up. 08022 1936 five seven

Adielcy:
pls hook me up. 08022 1936 five seven

pls boss me too 080two9 two43six 4 three.

graphicicon:
@excelJ, there is a problem on that TP concerning audio and video, if you are using other decoders that are not strong decoder model, the audio will be skiping and there will be a break on the picture in 3 seconds, except Qsat decoder, again there are other strong model that does not handle the problem of that audio are:
srt 4935, srt 4950, but the worst is 4935, the picture do freeze while the audio do have eco noise sound, just 2 days ago, am seeing 4922A that was handling it very well, is now having issues with some channels like Aljazera, KTN, the audio is just skiping, i realised that there must be a problem with their audio and video broadcasting format, GURUS IN THE HOUSE WHAT ARE YOUR TAKE ON THIS ISSUE?

..... Likely to do analysis on srt and other receivers CPU/processor clock speed on strong srt receivers or others...where clock speed is@Mhz....assuming pcr error on the broadcasting channel!
work is done faster with higher cpu speed!
SRT 4950H processor Sti 5211@(450Mhz)Cpu clock speed..
SRT 4950M processor sp 1502@(667Mhz)Cpu clock speed...
SRT 4922A processor @(550Mhz) cpu clock speed...
SRT 4922D+ processor @(550Mhz) cpu clock speed..
Skybox f5s receiver processor ali3601@(396Mhz)cpu clock speed..
SRT 4935 Processor M3515...processor clock speed not available...

skybox and srt 4950H and but srt4935 clock speed N/A may likely to skip on the said TP..though this only based on assumption..it might be the cpu speed ....

olason:
All, am happy to inform this honourable house dat I successfully launched my own what's app group, due to pressure from friends on this forum where the likes of the founding fathers of fta and the up coming super guys will be there. e.g Obnelly, butonday, Badaru, olason, Umassor, blexxonmark, etc i will also extend invitation to some of my Ogas here too and to those who are willing to read, do research, and also contribute in there own little way to the success of the group, They know themselves. Am still here too, so wat ever input I have will drop it here as well. This group is specially for die hard fans of FTA and which will b strictly by invitation where matured minds and people with ideals, solutions, expertize will gather in one place and exchange information, tutorials, diagram, pictures, photos of installation of various sizes of dishes will b posted there. Thank your for Understanding.

I have always been impressed by your contributions to fta world so far, so pls add me also as follows: 2348030432469.

always always ola son...hook me on 08166966159

olason:
All, am happy to inform this honourable house dat I successfully launched my own what's app group, due to pressure from friends on this forum where the likes of the founding fathers of fta and the up coming super guys will be there. e.g Obnelly, butonday, Badaru, olason, Umassor, blexxonmark, etc i will also extend invitation to some of my Ogas here too and to those who are willing to read, do research, and also contribute in there own little way to the success of the group, They know themselves. Am still here too, so wat ever input I have will drop it here as well. This group is specially for die hard fans of FTA and which will b strictly by invitation where matured minds and people with ideals, solutions, expertize will gather in one place and exchange information, tutorials, diagram, pictures, photos of installation of various sizes of dishes will b posted there. Thank your for Understanding.

@olason, lets get there and put mind together to improve FREE TO AIR, my number is on my footprint below my posts

@All, invites are been sent out as I speak. its your contribution on this thread that will speak for u, your loyalty, integrity, and most especially your love for satellite issues, . This is not a group where u start asking for keys or software or asking where is dstv position., if dats wat u want, am sorry.Tank you.

olason:
@All, invites are been sent out as I speak. its your contribution on this thread that will speak for u, your loyalty, integrity, and most especially your love for satellite issues, . This is not a group where u start asking for keys or software or asking where is dstv position., if dats wat u want, am sorry.Tank you.

add me up 07033469430

[quote author=olason post=38232485]@All, invites are been sent out as I speak. its your contribution on this thread that will speak for u, your loyalty, integrity, and most especially your love for satellite issues, . This is not a group where u start asking for keys or software or asking where is dstv position., if dats wat u want, am sorry
.Tank you. [/quote
Add me +255752456806

olason:
@All, invites are been sent out as I speak. its your contribution on this thread that will speak for u, your loyalty, integrity, and most especially your love for satellite issues, . This is not a group where u start asking for keys or software or asking where is dstv position., if dats wat u want, am sorry.Tank you.

olason please dnt forget ur brother here at west side on zero8one 85 8zero3four5one. Thankx baba

olason:
All, am happy to inform this honourable house dat I successfully launched my own what's app group, due to pressure from friends on this forum where the likes of the founding fathers of fta and the up coming super guys will be there. e.g Obnelly, butonday, Badaru, olason, Umassor, blexxonmark, etc i will also extend invitation to some of my Ogas here too and to those who are willing to read, do research, and also contribute in there own little way to the success of the group, They know themselves. Am still here too, so wat ever input I have will drop it here as well. This group is specially for die hard fans of FTA and which will b strictly by invitation where matured minds and people with ideals, solutions, expertize will gather in one place and exchange information, tutorials, diagram, pictures, photos of installation of various sizes of dishes will b posted there. Thank your for Understanding.

pls add me on 08033523664...thanks

These are d kind of stuffs olason likes.....sha add me up 07033469430......