Fulaman198:


Did you make sure you enabled the router interface, with 'no shut'

e.g.

ipv6 router eigrp 1
no shut or no shutdown
router-id 1.1.1.1 (or w/e you want your router id to be).

It should work. Also instead of taking a picture with your phone, please use the snipping tool screenshot tool to capture a screenshot. What version of packet tracer are you using btw? Though all versions should work. You should be using version 6.2

Its 6.2 and I am using router 1841 for the config... Were can I download the most recent gns3. Thanks..

FunkyABK:



Min fu mi pullo yola on. Sokoto street hedi lumo kiddum. Happy to know your are pullo. Guessed as much from your username. By the way, ado andi PC klinic na, ha jimeta, hedi police roundabout?

Yah I know of it/about it, well bros I don't want to disrupt this thread since it's about Cisco Networking. It's always good to meet another Fulani on here Please feel free to participate in some of my cultural threads I'm a mod in culture.

hadura29:


Its 6.2 and I am using router 1841 for the config... Were can I download the most recent gns3. Thanks..

From the GNS3 website bro:

http://www.gns3.com/

Fulaman198:


Yah I know of it/about it, well bros I don't want to disrupt this thread since it's about Cisco Networking. It's always good to meet another Fulani on here Please feel free to participate in some of my cultural threads I'm a mod in culture.

K...thanks for the chat...

Dr. Fulaman greetings, gradually moving in subnet. plz whats the difference between subnet and CIDR how can spot questions meant for each.

excess4luv:
Dr. Fulaman greetings, gradually moving in subnet. plz whats the difference between subnet and CIDR how can spot questions meant for each.

Subnet and CIDR go hand in hand. Let me explain.

CIDR stands for classless inter-domain routing. So if I have a CIDR notation of say /27 which corresponds to 255.255.255.224 it's just a short hand of me writing a subnet mask.

So if I told you to allocate an IP address assignment of a a /22 to our general staff that would mean allocate an IP address space under the subnet mask of 255.255.252.0 which ultimately supports 1,022 hosts.

Please let me know if you understand it now.

FunkyABK:
Pls I need advice on where I can apply for intern or volunteer service. I got my international certification for ccna(r&s) early this year. I am in serious need of a place where I can get practical experience. I am based in Abuja....u can reach me through my email murtalaumaradamu@gmail.com. Pls, help a fellow engineer.

If you find one too, pls help also i'm also based in Abuja.

Nice thread....I would very much partake In this wonderful learning/discussion on Cisco networking. Am a graduate of computer engineering. But recently started a self study plan (ccna) r& s before hiting up Sec, am currently using pt and gns3 as my sim....with Todd's material. Still on TCP/IP chapter though and it has been interesting i must say. hoping to write my exam come January. Please guys are there uni in Nigeria that offers Cisco course towards obtaining an MSc. Thanks guys kuddos to everyone on here.

shacore:
Nice thread....I would very much partake In this wonderful learning/discussion on Cisco networking. Am a graduate of computer engineering. But recently started a self study plan (ccna) r& s before hiting up Sec, am currently using pt and gns3 as my sim....with Todd's material. Still on TCP/IP chapter though and it has been interesting i must say. hoping to write my exam come January. Please guys are there uni in Nigeria that offers Cisco course towards obtaining an MSc. Thanks guys kuddos to everyone on here.

There are no unis that offer masters for only Cisco coursework. However, there are unis that offer masters in network systems engineering.

chilez:

If you find one too, pls help also i'm also based in Abuja.

Hi, there is an ICT bootcamp coming up in Sharaton hotel. I understand from the advert placed that at the end of the bootcamp, your performance could grant you the opportunity to be taken as an intern in one of the partnering organization to come. Check out their site, it could be the opportunity we are looking for. http://iceb.org.ng/index.php/en/

Fulaman198:


There are no unis that offer masters for only Cisco coursework. However, there are unis that offer masters in network systems engineering.

Thanks Fulaman198. Could you kindly list out these uni. It would be of great help thanks.

Thanks Fulaman198. Could you kindly list out these uni. It would be of great help thanks.

thats better Dr. Fulaman198. just finished studying vlsm and summarization. plz any assignment for me?

shacore:


Thanks Fulaman198. Could you kindly list out these uni. It would be of great help thanks.

I believe that Unilag has one, I'll check and see other unis thanks

excess4luv:
thats better Dr. Fulaman198. just finished studying vlsm and summarization. plz any assignment for me?

I'll give you an assignment, when I wake up, for now, good night

Fulaman198:


From the GNS3 website bro:

http://www.gns3.com/

Good morning. I have downloaded gns3, but the error message I got is this "no routers have been configured. You must provide your own router images in order to use gns3."

Are they referring to a life router?...

Thanks..

hadura29:


Good morning. I have downloaded gns3, but the error message I got is this "no routers have been configured. You must provide your own router images in order to use gns3."

Are they referring to a life router?...

Thanks..

you need cisco ios image file for the routers to function. Download from file sharing site and remember to download images for the router series supported by gns3. You should read the installation manual for gns3 b4 proceeding.

pls house, what is the command for natting public IP address.

I just installed packet tracer today on my system. How could i go about viewing,erasing, configuring, delete etc actions on it?

ptoall1000:
pls house, what is the command for natting public IP address.

From external interface: ip nat ouside dhcp if your isp uses dhcp.

I'm still here and will be making more posts again soon. Hang tight peeps.

@fulaman198, keep up the good job of impacting knowledge.

persius555:
@fulaman198, keep up the good job of impacting knowledge.

Sup man, I have been trying to configure GLBP but its not working.. I don't even know what I am doing wrong.

"Invalid input detected that's what it is telling me".. Help..

Fulaman198:


LOL ok I'll see what I can do, I have enough projects as is. I hardly sleep

pls, can u connect me to be working with u.i studied electronics and computer engineering i did training on cabling both cross and straigth thrugh cabling. I do repair computers.pls,help a brother.

hadura29:


Sup man, I have been trying to configure GLBP but its not working.. I don't even know what I am doing wrong.

"Invalid input detected that's what it is telling me".. Help..

Sorry, not that familiar with this glbp concept, though a nice mechanism for load balancing. Compare your configuration to the cisco link below. Its cisco's official glbp recommendation. Note; your device needs to support multiple mac-address for it to work. Lets know if it works.www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-3s/fhp-xe-3s-book/fhp-glbp.html

@Fulaman. Pls, what can you tell me about ip subnet zaro. I went for an interview and was asked about it. I checked online but wasn't getting any convincing explanation. Could you pls explain it to me?

persius555:
Sorry, not that familiar with this glbp concept, though a nice mechanism for load balancing. Compare your configuration to the cisco link below. Its cisco's official glbp recommendation. Note; your device needs to support multiple mac-address for it to work. Lets know if it works.www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipapp_fhrp/configuration/xe-3s/fhp-xe-3s-book/fhp-glbp.html

I have the config and I didn't miss any step. It didn't work for vrrp also but worked on hsrp.. Why?

Please I would like to take up CCNA, I have little background concerning IT. Help

baba11:
I just installed packet tracer today on my system. How could i go about viewing,erasing, configuring, delete etc actions on it?

Youtube is ur friend

ptoall1000:

Youtube is ur friend

I've figured it out....thanks

FunkyABK:
@Fulaman. Pls, what can you tell me about ip subnet zaro. I went for an interview and was asked about it. I checked online but wasn't getting any convincing explanation. Could you pls explain it to me?

From my little understanding, let me put you through:
It is called IP subnet zero.This deal in the abilility for your block size to start from zero.
Let's say your subnet mask is 192.168.10.0/27.

Definitely, this is a class c IP address with CIDR of /27.So if we take third octet,we we see that it has mask of 224.
So block size = 256-224
=32
Normally, your block sizes should 32,64,96,128....256 but since it's IP zero subnet, it'll now be 0,32,64,96,128....256 and diy can be plot in the vlsm table/graph as thus also.

baba11:

From my little understanding, let me put you through:
It is called IP subnet zero.This deal in the abilility for your block size to start from zero.
Let's say your subnet mask is 192.168.10.0/27.

Definitely, this is a class c IP address with CIDR of /27.So if we take third octet,we we see that it has mask of 224.
So block size = 256-224
=32
Normally, your block sizes should 32,64,96,128....256 but since it's IP zero subnet, it'll now be 0,32,64,96,128....256 and diy can be plot in the vlsm table/graph as thus also.

Thanks man. I appreciate it.