₦airaland Forum

HsLBroker:
Current price

2 x 2 @ N250 per rate

2 x 3 @ N350 per rate

2 x 4 @ N450 per rate

2 x 6 @ N650 per rate

3 x 4 @ N650 per rate

1 x 12 @ N1500 per rate

jiobestfarms:
Hslbroker Can Please Give An Estimate Of What It Will Take To Fence 15hectares of land measuring 100 by 100, The Height Should Be 9course High With Pillar In Between 12ft Of The Fence. Both Amount Of Rods Needed. Thanks In Advance

eluquenson:
This your calculation is really useful and accurate.
Thanks as i just used it on my foundation project.

ricki:
hsl do you do contract work

i have a fence job in ibadan i want done within 2 weeks. pls reply asap

HsLBroker:
yes

ricki:
#

So..... the land is 100x50 and i want it finished under 2weeks. so give us the extimate. plus gate metal ofcourse

HsLBroker:
The Simplest Way To Calculate The Numbers Of Blocks U Need For Your Fence


The simplest way to calculate the numbers of blocks you need for your fence project, assuming you are fencing a land measuring 120 feet by 60 ft, a standard plot

This calculation is based on 9 inches block fence .
The measurement we are using is 120 ft (length) and since we have two lengths that is multiply by 2 which is 240 ft. (120 x 2) = 240

The breadth is 60 ft and also since we have 2 breadths that equal 120 ft (60 x 2) = 120
Then (240 + 120) that is 360 feet perimeter line fencing.

The calculation

(we are to convert this 360 feet to inches ) since a foot is 12 inches , now let us multiply 12 inches by 360 ft which is 4320 inches.

Now to get the line numbers of blocks that will go around the fence perimeters of 4320 inches or 360 feet, we would need to divide 4320 by 18 inches, since the length of any block be it 6 inches or 9 inches is 18inches.

Now 4320 inches divide by 18 inches is approximately 240 line of blocks , then we must multiply that by the numbers of coaches of blocks you want for your height, assuming 7 ft which is 9 coaches that means 240 multiply by 9 which is 2160 blocks and that is all you need anything aside from this is fake and fraud, this calculation is derive by me professionally and i have been using it without any mistake, but always remember to add 10 % of blocks to it because of broken blocks, and for this work, you only need 30 bags of cements, one bag of cement to 70 blocks, is standard.

for your pillars between the fence, let assume 6 blocks far from the next pillar, that means 6 divide by 240 which is 40 pillars, 1 bag of cement to 2 pillars standard, that is 17 bags plus 40 bags that is 47 bags is need by me to do this fence, if i'm in position and you should also to add 15 bags for floor blinding of the fence making 62 bags of cement.

Then, we need to minus the gate and the pillars that are also taking space in the fence.

The gate is 12 ft, let us assume the gate columns or pillars is 14 inches each, we have 2 pillars holding the gate, that is 28 inches or 2. 4 feet plus 12 feet that is 14.4 feet or approximately 15 feet.

Remember we already calculate the pillars that 40 pillars is need for the measurement.

Each pillar or column for 9 inches concrete is 9 inches square, 9 x 40 = 360 inches that is (30 feet + 15 feet = 45 feet ) / 18 inches = 30 blocks multiply by the number of coaches, 30 x 9 = 270 block minus 2160 blocks = 1890 blocks in total.

40 lengths of 12mm iron rod, since one pillar is equivalent to 1 length.

3 lengths of 16mm iron rod for the 2 big pillars holding the gate.

90 planks of soft wood for the framing.

1 truck of granite (granite would be use for the wall foundation and columns)

5 trucks of sharp sand

Thanks for the opportunity giving me to explain this simple arithmetic.

Regards
Adeniyi

ricki:
phemyfo@gmail.com

HsLBroker:
Ok

HsLBroker:
.

mrinsurer:
Fyncorp formwork result..no concrete spill and zero wastage ..and don't forget..its cost effective.
08034911406

mrinsurer:
Fyncorp formwork result..no concrete spill and zero wastage ..and don't forget..its cost effective.
08034911406

mufutau55:
Very, very good.

Hajji M.

HsLBroker:
correct

HsLBroker:
The Simplest Way To Calculate The Numbers Of Blocks U Need For Your Fence


The simplest way to calculate the numbers of blocks you need for your fence project, assuming you are fencing a land measuring 120 feet by 60 ft, a standard plot

This calculation is based on 9 inches block fence .
The measurement we are using is 120 ft (length) and since we have two lengths that is multiply by 2 which is 240 ft. (120 x 2) = 240

The breadth is 60 ft and also since we have 2 breadths that equal 120 ft (60 x 2) = 120
Then (240 + 120) that is 360 feet perimeter line fencing.

The calculation

(we are to convert this 360 feet to inches ) since a foot is 12 inches , now let us multiply 12 inches by 360 ft which is 4320 inches.

Now to get the line numbers of blocks that will go around the fence perimeters of 4320 inches or 360 feet, we would need to divide 4320 by 18 inches, since the length of any block be it 6 inches or 9 inches is 18inches.

Now 4320 inches divide by 18 inches is approximately 240 line of blocks , then we must multiply that by the numbers of coaches of blocks you want for your height, assuming 7 ft which is 9 coaches that means 240 multiply by 9 which is 2160 blocks and that is all you need anything aside from this is fake and fraud, this calculation is derive by me professionally and i have been using it without any mistake, but always remember to add 10 % of blocks to it because of broken blocks, and for this work, you only need 30 bags of cements, one bag of cement to 70 blocks, is standard.

for your pillars between the fence, let assume 6 blocks far from the next pillar, that means 6 divide by 240 which is 40 pillars, 1 bag of cement to 2 pillars standard, that is 17 bags plus 40 bags that is 47 bags is need by me to do this fence, if i'm in position and you should also to add 15 bags for floor blinding of the fence making 62 bags of cement.

Then, we need to minus the gate and the pillars that are also taking space in the fence.

The gate is 12 ft, let us assume the gate columns or pillars is 14 inches each, we have 2 pillars holding the gate, that is 28 inches or 2. 4 feet plus 12 feet that is 14.4 feet or approximately 15 feet.

Remember we already calculate the pillars that 40 pillars is need for the measurement.

Each pillar or column for 9 inches concrete is 9 inches square, 9 x 40 = 360 inches that is (30 feet + 15 feet = 45 feet ) / 18 inches = 30 blocks multiply by the number of coaches, 30 x 9 = 270 block minus 2160 blocks = 1890 blocks in total.

40 lengths of 12mm iron rod, since one pillar is equivalent to 1 length.

3 lengths of 16mm iron rod for the 2 big pillars holding the gate.

90 planks of soft wood for the framing.

1 truck of granite (granite would be use for the wall foundation and columns)

5 trucks of sharp sand

Thanks for the opportunity giving me to explain this simple arithmetic.

Regards
Adeniyi

HsLBroker:
The Simplest Way To Calculate The Numbers Of Blocks U Need For Your Fence


The simplest way to calculate the numbers of blocks you need for your fence project, assuming you are fencing a land measuring 120 feet by 60 ft, a standard plot.

This calculation is based on 9 inches block fence .
The measurement we are using is 120 ft (length) and since we have two lengths that is multiply by 2 which is 240 ft. (120 x 2) = 240

The breadth is 60 ft and also since we have 2 breadths that equal 120 ft (60 x 2) = 120
Then (240 + 120) that is 360 feet perimeter line fencing.

The calculation

(we are to convert this 360 feet to inches ) since a foot is 12 inches , now let us multiply 12 inches by 360 ft which is 4320 inches.

Now to get the line numbers of blocks that will go around the fence perimeters of 4320 inches or 360 feet, we would need to divide 4320 by 18 inches, since the length of any block be it 6 inches or 9 inches is 18inches.

Now 4320 inches divide by 18 inches is approximately 240 line of blocks , then we must multiply that by the numbers of coaches of blocks you want for your height, assuming 7 ft which is 9 coaches that means 240 multiply by 9 which is 2160 blocks and that is all you need anything aside from this is fake and fraud, this calculation is derive by me professionally and i have been using it without any mistake, but always remember to add 10 % of blocks to it because of broken blocks, and for this work, you only need 30 bags of cements, one bag of cement to 70 blocks, is standard.

for your pillars between the fence, let assume 6 blocks far from the next pillar, that means 6 divide by 240 which is 40 pillars, 1 bag of cement to 2 pillars standard, that is 17 bags plus 40 bags that is 47 bags is need by me to do this fence, if i'm in position and you should also to add 15 bags for floor blinding of the fence making 62 bags of cement.

Then, we need to minus the gate and the pillars that are also taking space in the fence.

The gate is 12 ft, let us assume the gate columns or pillars is 14 inches each, we have 2 pillars holding the gate, that is 28 inches or 2. 4 feet plus 12 feet that is 14.4 feet or approximately 15 feet.

Remember we already calculate the pillars that 40 pillars is need for the measurement.

Each pillar or column for 9 inches concrete is 9 inches square, 9 x 40 = 360 inches that is (30 feet + 15 feet = 45 feet ) / 18 inches = 30 blocks multiply by the number of coaches, 30 x 9 = 270 block minus 2160 blocks = 1890 blocks in total.

40 lengths of 12mm iron rod, since one pillar is equivalent to 1 length.

3 lengths of 16mm iron rod for the 2 big pillars holding the gate.

90 planks of soft wood for the framing.

1 truck of granite (granite would be use for the wall foundation and columns)

5 trucks of sharp sand

Thanks for the opportunity giving me to explain this simple arithmetic.

Regards
Adeniyi

HsLBroker:
.

NaMe4:
HsLBroker, Good evening. Hope you are having a wonderful weekend.
Thanks a lot for your knowledge which you have shared.

I'm a bit confused. I think all fences usually have foundations. I think about 1.9ft deep.

The 9 coaches, does it include those in the foundation? Also, is mortar poured into the foundation or the ground is just covered up after setting the two coaches in the (ground) foundation? Thanks.

mufutau55:
It will be ridiculous for any bricklayer not to blind (pouring concrete mortar with granites or gravel) on the ground the fence foundations before laying the blocks. Usually one block should be underneath the ground level, in a very good solid soil. But me I be novice o.

Hajji M.

mufutau55:
It will be ridiculous for any bricklayer not to blind (pouring concrete mortar with granites or gravel) on the ground the fence foundations before laying the blocks. Usually one block should be underneath the ground level, in a very good solid soil. But me I be novice o.

Hajji M.

NaMe4:
Lol. Me sef dey learn o. Just a rough guide for estimates.

I guess estimates for blinding was not included in the OP's earlier calculations. Cos it seems the gravel, cement and sharp sand he estimated were for the pillars only.

If so, how can on estimate for blinding? Thanks.