Kimlad:
Good evening prof, I want to get generator power booster for my 1kva tiger generator in order to power my tokunbo small freezer. Is this advisable?

there is nothing like power booster,for gen
let me tell u this, it is ur enginge that carry 85% of the load while using ur gen, when it come to carry load, dont just look at the kva, but also look at the hp of the engine, if ur load is toomuch for ur gen, is ur egine that will cry or off,

ayodot:
Hello Engr.

I will like to know why what causes the damage to battery of 2.0-5.5kva Generator. They seems to be the first thing to get spoiled

yeah that is true, but one thing u need to know is battery are made of cells, and the cells are leads, and leads can be broken easily,if they are vibrated or disturb all the time, u know gen vibrate alot, are when the battery is vibrated for some period of time the cell will brake, then ur battery will be dead.

Raymondluv:
pls I need help.let me explain it to you
.
It all started on friday when i wanted to make use
of the Generator I put on the Generator set buy
7pm,buy 8:15pm the Generator light went off but
the Generator was still on.I went out side I tried
adjusting the plug wire no way i put off the
Generator, on it back again light came on after
some minite the light went off but Generator was
still on I went out side tried adjusting the plug it
came on and went off again..same thing happened
on Saturday.I put on the Generator in the morning
from 10Am to 11:15Am nothing happend but when
i want to use it at night and i put on television the
light we go off but generator we be on.I dont know
what to do am using an ELEPAQ generator set

is either is ur brush, or the avr, that all

enochogaga:


is either is ur brush, or the avr, that all

how much to change d AVR

Good evening sir.

thank you for the great service you are doing here.

pls i need assistance on buying a generator that can comfortably power my 1hp air conditioner, 240 liters fridge (always on), 32" led tv, 1 ceiling fan (occasionally on), 4 led bulbs, microwave used once or twice a day, 1 pressing iron used once a week, and 6kg washing machine (used once a week).

pls what brand would you suggest and how many kva should i buy? also idea of the present cost price.

Thanks in anticipation.

Good evening sir.

thank you for the great service you are doing here.

pls i need assistance on buying a generator that can comfortably power my 1hp air conditioner, 240 liters fridge (always on), 32" led tv, 1 ceiling fan (occasionally on), 4 led bulbs, microwave used once or twice a day, 1 pressing iron used once a week, and 6kg washing machine (used once a week).

pls what brand would you suggest and how many kva should i buy? also idea of the present cost price.

Thanks in anticipation.

How do u differentiate a fake tiger generator from an original one?

Raymondluv:
how much to change d AVR

hmmm i cant really tell u how much now, cos location matter, but over here is 1500-1800 for the original one

enochogaga:


hmmm i cant really tell u how much now, cos location matter, but over here is 1500-1800 for the original one

were is brush. located in generator

Emocream:
Good evening sir.

thank you for the great service you are doing here.

pls i need assistance on buying a generator that can comfortably power my 1hp air conditioner, 240 liters fridge (always on), 32" led tv, 1 ceiling fan (occasionally on), 4 led bulbs, microwave used once or twice a day, 1 pressing iron used once a week, and 6kg washing machine (used once a week).

pls what brand would you suggest and how many kva should i buy? also idea of the present cost price.

Thanks in anticipation.

get this normal 5.5kva (8000,8800) the german product of this kva is 850k-950k that of tigmax,sumec,elepaq,lutian,are towards 150k-180k, but i dont really know the one of hyundai, if u are buy the honda pls dont go to market urself, cos they can give u the one of 150+, but if u are to buy at the range of 150k buy elepaq.

DonBobes:
How do u differentiate a fake tiger generator from an original one?

real original tiger, the coil is seperated frm the engine, but u cant get this type anymore, but we still have semi original, the crankcase us thick, the coil is copper, %100 copper is not writing on the tank, the back cover is thick, and when i draw the rope out, the compression will still tell,and lastly the pattern of the exaust.

enochogaga:


get this normal 5.5kva (8000,8800) the german product of this kva is 850k-950k that of tigmax,sumec,elepaq,lutian,are towards 150k-180k, but i dont really know the one of hyundai, if u are buy the honda pls dont go to market urself, cos they can give u the one of 150+, but if u are to buy at the range of 150k buy elepaq.

Thank you sir.

i have decided to buy the Elepaq.

Will the voltage/current be too much for my earlier listed appliances (and possibly damage the appliances) if i buy the 7.2kva elepaq gen instead of the 5.5kva? the price seems to be almost the same tho. i apologize as i am a total novice on this issue.

thanks again.

Weldon engineer pls need ur help bought dis sumec 3000e2 yesterday,I used it for 1hr De tin started making noise as if it's in short of fuel den off by its self,I try oning it bt De tin no green I open De oil cap oil started flowing out after everything ee start, work for 30min den repeat De sametin,duo I add another oil on top of De one De seller added

Emocream:


Thank you sir.

i have decided to buy the Elepaq.

Will the voltage/current be too much for my earlier listed appliances (and possibly damage the appliances) if i buy the 7.2kva elepaq gen instead of the 5.5kva? the price seems to be almost the same tho. i apologize as i am a total novice on this issue.

thanks again.

the higher the kva, the higher load it can carry, so is not the higher the kva the higher the voltage, not is like that, the voltage remains 2200.
so it cannot damage ur applainces. and pls dont be too carry away with all this their any how ratings of kva.

cyprianfrancis:
Weldon engineer pls need ur help bought dis sumec 3000e2 yesterday,I used it for 1hr De tin started making noise as if it's in short of fuel den off by its self,I try oning it bt De tin no green I open De oil cap oil started flowing out after everything ee start, work for 30min den repeat De sametin,duo I add another oil on top of De one De seller added

if u are to put oil inside ur gen, pls after pouring the oil inside the gen, make sure the gen is well place on a flat floor, if the oil pour out then it as over gauge, then remove small, or allow it to pour, u will see the oil at the mouth without pourin out, then it as gauge
i think ur gen is over gauge, that why it goes off

why not give to ur engineer to go and buy gen for u?
i do advice people not to just go and buy want they dont have ideal about, because the sellers just need ur money, some are so wicked, that they can give u less for what u pay for.
like now someone frm abuja sent me money to buy original gen with copper for him, and today am sending the gen to him, because he as falling a prey for one onec. so be wise.

enochogaga:


if u are to put oil inside ur gen, pls after pouring the oil inside the gen, make sure the gen is well place on a flat floor, if the oil pour out then it as over gauge, then remove small, or allow it to pour, u will see the oil at the mouth without pourin out, then it as gauge
i think ur gen is over gauge, that why it goes off

Have Don dat bt e keep going off, pls is dere any other tin i can do,duo am suspecting De plug.

cyprianfrancis:


Have Don dat bt e keep going off, pls is dere any other tin i can do,duo am suspecting De plug.

no is not the plug, i think u should disconet the oil alert switch, disconet it

enochogaga:


the higher the kva, the higher load it can carry, so is not the higher the kva the higher the voltage, not is like that, the voltage remains 2200.
so it cannot damage ur applainces. and pls dont be too carry away with all this their any how ratings of kva.

Thank you so much.

enochogaga:


no is not the plug, i think u should disconet the oil alert switch, disconet it

Pls how, were is it located

cyprianfrancis:
Pls how, were is it located

wait let me give u photo of it

enochogaga:

wait let me give u photo of it

Tanks have disconet De oil alert bt still desame,De seller agreed to change it 2morrow thanks alot for all ur effort

Hello Enochogaga

I sell this new Dual Carburetor gas/petrol. But one of the persons I was persuading to buy said his engineer told him it knock Generator engine.

I will like to know is this is true or you've came across such?

Pls my engineer, I have a Yamaha EF 2600 generator....blue in colour, made in Japan that's giving me headache. The current it supplies to the spark plug is very low which make it difficult to start in one pull. Pls, what shld I do to get it back as before....I.e starting in one pull? sometimes I will pull the starting coil or rope for up to 10times or more before it will manage to start. Pls I need ur advise. Thanks. Pls u can mail me ur phone number at gregkuika@yahoo.canada

ayodot:
Hello Enochogaga

I sell this new Dual Carburetor gas/petrol. But one of the persons I was persuading to buy said his engineer told him it knock Generator engine.

I will like to know is this is true or you've came across such?

is not true,cant the person think, can a cabrator knock engine, cabrator is just to suply the spark frm the plug flameable substance, and gas cap does dsame also, it as noting to do with knocking of engine.
tell that person to come and ask me,what knock engine, i will tell him

gregkuika:
Pls my engineer, I have a Yamaha EF 2600 generator....blue in colour, made in Japan that's giving me headache. The current it supplies to the spark plug is very low which make it difficult to start in one pull. Pls, what shld I do to get it back as before....I.e starting in one pull? sometimes I will pull the starting coil or rope for up to 10times or more before it will manage to start. Pls I need ur advise. Thanks. Pls u can mail me ur phone number at gregkuika@yahoo.canada

first i need to know if it is chaness coil,or contacts ur gen uses,

if u need my contact 08131060632. enochogaga@gmail.com

enochogaga:


first i need to know if it is chaness coil,or contacts ur gen uses,

if u need my contact 08131060632. enochogaga@gmail.com

@gen prof,pls which piston between sumec Firman 2.5kva and 3kva can I use to replace piston of tiger tg 2700 gen? Treat as urgent

AdeOracle:


@gen prof,pls which piston between sumec Firman 2.5kva and 3kva can I use to replace piston of tiger tg 2700 gen? Treat as urgent

is the tiger has the iron shork or rubber shork?

enochogaga:


is the tiger has the iron shork or rubber shork?

rubber shock,...ac output is 50hz,rated output 2.0kva 220v ,single phase

enochogaga:


is the tiger has the iron shork or rubber shork?

A pic of the gen

good evening prof

thanks for the work here

Please can a 1.3kva elepaq generator carry a haier thermocool fridge(medium sized HRF 147) and TV ?

ciwi:
good evening prof

thanks for the work here

Please can a 1.3kva elepaq generator carry a haier thermocool fridge(medium sized HRF 147) and TV ?

no it can not