brainhack:
Good day people, i am quite new to this. I need Gurus in the house to please answer some questions.
1) i have a TV samsung J6300, the specs says it has DVB-T2 tuner. can i get free-to-air channels on it using just a dish or there is something additional i need?
2) if i decide to get a DSTV decorder for example, can i use this connection (DSTv come with a dish) to get other free-to-air Channels (channels not on DSTV)?

Your TV can only receive channels that are receivable on DVB-T2 platform... examples are channels on GoTv, Star time terrestrial, Metro Tv etc and channels on VHF/UHF platform. It cannot receive any channel that requires satellite dish without DVB-S/S2 receiver.

Edited.
My bad, it looks as if I have duplicated the answer that Dishtech gave to you. We were typing at the same time.

Please help me send autoroll software for Dsat decoder to djolat@yahoo.com

Please can someone help me send autoroll software for Dsat decoder to djolat@yahoo.com

Please house, your brother needs help, the problem is that my multi tv channels with the exception of max tv, and thunder tv keeps fluctuating, like 74, 30 and after a while, it will show no or bad signal. Due to curiosity, i tried making sure that the nuts and screws are properly screwed, of which i messed up by spoiling the whole set up, i had to call my cable installer, he came and set it up again last month and after about a week or less, the strength started fluctuating again, out of vex, i bought a new roll and clip and have changed the wiring because I reasoned it might be from the cable wire but to my disappointment, the strength is still fluctuating though the signal increased and have seen other networks like the press tv etc to be working perfectly now. Please what can be the cause, is it the diseq switch but my 43°West and 68°East are working perfectly or could it be the multi lnb or is it from the pan or is it general which i doubt because my friend's own that lives in my house don't have the same issue and is the same person that installed the 2 or could it be from my 4922 decoder? Let me restate that the fluctuations have somehow reduced when compared to the time I had not changed the wire. This affects the performance of even joy prime and core tv them. Family please advise me on the possible cause and how to rectify it, thanks.

What autoroll software will be suitable for Qsat q11, thanks

Please also i will like to know the best ku band positions outside multi tv and press tv, i want to port from champion tv since the are no longer viable. I read comments about free to view card, i want to know how it is done and the positions and requirements? Can i do it with my old mytv card on my 4922 and what channels and position is mytv? Please which one is Eutelsat 16 East, which channels do the air? Someone advise me please

Belintersat 1 (Belarus Sat 1) @ 51.5° East
Fréq: 3877 – L – 6420 (C- Band)

KWESE FTA
Biss: F8 D1 08 D1 17 CB A9 8B

KWEWE STREAM
Biss: F8 D1 08 D1 17 AB C8 8A

Pls house I need key for HD24 East

ify4king:
sent!

Bros,thank you very much for the digisat software but i need more favour from you,i tried to download autoroll qsat 23 and 26 G from dropbox n sendspace but couldnot,i just want you to send the two software to enogierupaul@gmail.com,thanks alot.

ify4king:
drop ur email let me send it to u

Pease help me send autoroll software for Dsat decoder to djolat@yahoo.com

Chriswazo:
Please also i will like to know the best ku band positions outside multi tv and press tv, i want to port from champion tv since the are no longer viable. I read comments about free to view card, i want to know how it is done and the positions and requirements? Can i do it with my old mytv card on my 4922 and what channels and position is mytv? Please which one is Eutelsat 16 East, which channels do the air? Someone advise me please

Eutelsat16 is d new Mytv position where u hv tvc, and our local channels, with ftv card u will hv access to all our local channels free, u must register and activate that ur old card b4 it can work.

Qsat 23g for sale.call 08030911439

paulowas:

Bros,thank you very much for the digisat software but i need more favour from you,i tried to download autoroll qsat 23 and 26 G from dropbox n sendspace but couldnot,i just want you to send the two software to enogierupaul@gmail.com,thanks alot.

Done!

dejavou:


Pease help me send autoroll software for Dsat decoder to djolat@yahoo.com

sent

Please those with autoroll should kindly give us the afn new keys

guys help my strong decoder just stuck at those four dash it doesnt boot please help

ify4king:
sent

@ify4king, you are now officially software king in this forum. Keep it up.

ify4king:
Done!

Thanks alot,you just made a diffcult project to be very easy for me,Once again thank you!

pepculture:
guys help my strong decoder just stuck at those four dash it doesnt boot please help

Is your box 'Original' or 'china'?Are you locked to 16E? Or have a combination locked on 16E?

Chriswazo:
Please house, your brother needs help, the problem is that my multi tv channels with the exception of max tv, and thunder tv keeps fluctuating, like 74, 30 and after a while, it will show no or bad signal. Due to curiosity, i tried making sure that the nuts and screws are properly screwed, of which i messed up by spoiling the whole set up, i had to call my cable installer, he came and set it up again last month and after about a week or less, the strength started fluctuating again, out of vex, i bought a new roll and clip and have changed the wiring because I reasoned it might be from the cable wire but to my disappointment, the strength is still fluctuating though the signal increased and have seen other networks like the press tv etc to be working perfectly now. Please what can be the cause, is it the diseq switch but my 43°West and 68°East are working perfectly or could it be the multi lnb or is it from the pan or is it general which i doubt because my friend's own that lives in my house don't have the same issue and is the same person that installed the 2 or could it be from my 4922 decoder? Let me restate that the fluctuations have somehow reduced when compared to the time I had not changed the wire. This affects the performance of even joy prime and core tv them. Family please advise me on the possible cause and how to rectify it, thanks.

try changing d position of ur lnb from h to v i.e from 9 o clock to 6 o clock den if ur max tv is is v change to h nd if ur core tv is h change to v just like dat for d odas .dats what i did nd all of dem are stable including gtv sports plus.or better still u can still check ur diseqc if its okay

can i track AFN @ eutel 9 wth 1m disc an in onitsha

sunny4christ:
can i track AFN @ eutel 9 wth 1m disc an in onitsha

No, you need 2.4m and above in Onitsha.

krasican:
i tried an old mytv card that i paired with one of my 4922 decoder surprisingly it works on 2 other unpaired 4922 decoder with d same card

sir, does this means mytv channels will be working, when subscription is paid?, since 4922 is not mytv compliant

ben1daEbiri:
Is your box 'Original' or 'china'?Are you locked to 16E? Or have a combination locked on 16E?

it orginal i had a combibation lockrd on 16e

Pls Who knows how to enter powerful key on sp powersat 777 receiver manually. It autorolls

ryusufu:
sir, does this means mytv channels will be working, when subscription is paid?, since 4922 is not mytv compliant

u only have access to 11 ftv stations on mytv like channels,ait,rave,wazobia,ntai,waptv,rti1,rti2,aljazeera,kbs world,galaxy,silverbird ,digital congo ...u cant subscribe to mytv stations like mytv series it wont work becos it is not mytv embedded decoder...STRONG is pleased to offer a Free-to-View TV service
(FTV, encrypted yet subscription-free)....

Non-Pairing Receivers
(unable to access Pay TV services)

SRT 4920 Series
SRT 4922 Series
SRT 4950 Series
SRT 4955 Series


Pairing Receivers
(able to access Pay TV services)

SRT 4915
SRT 4940
SRT 4935 Series
SRT 4672 Series
SRT 4675 Series

pepculture:

it orginal i had a combibation lockrd on 16e

Permit me to ask again7;Are you sure your box is ORIGINAL?what model is it?

ben1daEbiri:
Permit me to ask again7;Are you sure your box is ORIGINAL?what model is it?

mytv has done couple of upgrade on the box 4669z

Chriswazo:
Please also i will like to know the best ku band positions outside multi tv and press tv, i want to port from champion tv since the are no longer viable. I read comments about free to view card, i want to know how it is done and the positions and requirements? Can i do it with my old mytv card on my 4922 and what channels and position is mytv? Please which one is Eutelsat 16 East, which channels do the air? Someone advise me please

Move your dish to 7 east or 7 west it have good channels
You can also try 16 East if you don't have it yet

barak1:

Please those with autoroll should kindly give us the afn new keys

There is a new decoder that has an aoutoroll key installed in.4 more details call 08062261300 to get it..with it der wouldn't be any need for inputing biss keys again.

pls which powderVU channel can i track with 1m with scaler ring

xenoo:
Is tiger a good autoroll substitute to 4950. I want to know it's autoroll performance b4 purchasing. #limited cash. Urgent reply please

It's quite good, but try getting the autoroll software for the qsat or u pm me 4 a better receiver with autoroll preinstalled in it.