General Topic Thread-To Discuss Anything And Everything in Building Construction - Properties (1725) - Nairaland
Nairaland Forum › Nairaland General › Properties › General Topic Thread-To Discuss Anything And Everything in Building Construction (6125053 Views)
1 2 3 ... 1722 1723 1724 1725 1726 1727 1728 ... 3983 Reply (Go Down)
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by QSFemi(m): 7:32am On Nov 04, 2020 |
Consultants that sell their professional services to clients are employees of those clients while the service lasts. This is not to say that professional service sellers are at the mercy of their clients but rather to do their very best within their professional competence to meet the needs of their clients as fully described in the conditions of engagement. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by valencia2012(m): 7:53am On Nov 04, 2020 |
Johntemmy:Kindly give me the cost of the following: 1. 2 by 2 by 16 hard = 430 pieces 2. 2 by 2 by 16 soft = 330 pieces 3. 2 by 4 by 16 = 550 pieces. Including transportation and logistics to IMO state. And also a partial projection of what it might look like by the end on November. Thanks. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Dennis3D(m): 8:07am On Nov 04, 2020*. Modified: 8:27am On Nov 04, 2020 |
One4me:Thank you for analyzing all scenarios. They are real and factual. Experience is the best teacher. You have said it all. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by dbshaywhy(m): 8:12am On Nov 04, 2020 |
DancingSkeleton:Waw... We are both avin same building structure.. Mine too is at roofing level... Kindly let me know how you later work tins out. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Dijita: 8:23am On Nov 04, 2020 |
Jasobry:thanks |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by n3xt(m): 9:31am On Nov 04, 2020*. Modified: 10:24am On Nov 04, 2020 |
Some few weeks back a friend almost ran into a similar issue with his architect if not for timely intervention. The building plan has been approved and the project has been built up to lintel stage before he noticed the porch wasn’t facing the front of the land. He was going to collect his money back from the architect and do all sorts and I ask him “Gbenga, did he send you the plan before you paid him his balance? Were revisions, corrections or adjustments made to his initial submission or not?” I told him “You don’t know how to interpret a building plan and you want the young architect who has never visited your project to take responsibiliy for your mistake. I hope you learn from this.” He has started spewing words “Nigerians ”I don’t know the architect but I’m not going to stand and watch my friend rubbish an innocent guy. _________ There’s a project I did on this forum some few years back designed by one of the foremost contemporary design architect in Nigeria. The drawing alone cost about N2,000,000. When the revisions and back and forths got too much, the architect back out and the client decided to engaged me to redraw the plan. We ended up using Nairaland architects to draw a new plan. Guess what? The main architect has delivered his job but the clients failure to get the estate’s deed restriction across to the the architect during the design phase messed up the whole job. The client loved the design, everything was perfect but the estate rejected it. Was it the architects fault? ![]() Was the N2m a waste? No! Even though we had to redraw the plan, we only effect change in few areas to meet the estate’s requirement - the concept remains the same. Guess what? No noise! The guys are all here - the architect, the client and the man in between ![]()
|
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by oluwaseyi0: 9:59am On Nov 04, 2020 |
please someone should help me convert 60 feet by 40 feet to square meter (sqm) |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by twinskenny(m): 10:15am On Nov 04, 2020 |
oluwaseyi0:60ft= 5.574 square metres 40ft= 3.716 square metres |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Dennis3D(m): 10:23am On Nov 04, 2020 |
oluwaseyi0:60fit x 40fit = 2400sqfeet Same as 18.1mx 12.1m = 219.39sqm |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by rotecch77(m): 11:04am On Nov 04, 2020 |
Tezcatlipoca:install pop underneath the decking. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Chekitaut: 12:04pm On Nov 04, 2020 |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Chekitaut: 12:05pm On Nov 04, 2020 |
Dennis3D:Engineer calculation on point |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by krak101(m): 12:20pm On Nov 04, 2020 |
Jasobry:Looks good. How much have you spent up to this stage? Do you mind sharing your plan? Thanks |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Dennis3D(m): 12:21pm On Nov 04, 2020 |
rotecch77:Good idea, but... I will be a bit more worried about the staircase area that goes up to the upper floor (not completed), if not properly done, might lead to leakage and would be worrisome to the POP. Just my thought. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by diordaves(m): 12:44pm On Nov 04, 2020 |
adezie:Listening to those audio recordings, I just weak. I don't know if to laugh or cry. But I cried a little for the client sha. I really did. .........I SAY KEEP QUIET WHEN I TALK TO YOU!!!! I should keep shut while you talk to me after I have EMPLOYED you to deliver a service. DON'T TALK TO ME LIKE I'M YOUR EMPLOYEE!!!!! Really? So what are you? My father and I'm your child? I HAVE TOLD YOU MY SCHEDULE, NOW GET OFF MY PHONE, GET OFF MY PHONE!!!! But you called me na. I SAY GET OFF MY PHONE!!! Ogbele o! As your EMPLOYER, I expect to be part of your SCHEDULE so it does not help how I feel if you have told me of your schedule previously. I cried at the end of the clip when the client said: you have my money; anything you like you can do. Oh lord, this really touched me. And of course, he did what he liked, he arbitrarily and dictatorially deducted 50% of the mobilisation fee for his effort. Effort at talking to me as a child? So I will pay you 25k to berate me like a child? Wahala dey o. Well, I'm with Egun on this one: I will pursue you to the ends of the world and back to get my money in FULL just to prove two points: I'm not your child and yes, you ARE my employee. I have been on Nairaland going a very long time and I've witnessed all Contractor - Client fall out, those audio clips are the worst case study to date. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Kestar12: 1:03pm On Nov 04, 2020 |
dbshaywhy:Can you partner |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Kestar12: 1:06pm On Nov 04, 2020 |
dbshaywhy:Let's go into partnership, we help you manage your trucks and give you returns on a bi-weekly or monthly basis. For more information, please call 0902 216 2936. WE ARE LOOKING FOR PARTNERS/INVESTORS FOR HAULAGE BUSINESS. Bonafide Blessing Express Limited is a Company into Services such as Travels & Tourism, Agriculture, Logistic and Haulage. The company is actively reliable in hiring out Trucks and Vans to contractors, Construction companies, Mining companies, Grocery stores etc. Also to Individual or Companies that are interested in hiring Trucks and Vans for their projects or Company's distributions. We are looking for Partners/Investors who will partner with us with their Trucks and Vans or those that can invest in the company to buy Trucks and Vans for hiring jobs. Currently, we are looking forward to Partners and Investors (individual/companies) that are interested in partnering with us, by providing us Trucks/Vans for a minimum of 1 year renewable partnership and absolute right to use their Trucks/Vans for businesses. Mode Of Payment: Bi-weekly or Monthly through Bank transfer. NOTE : The company will take FULL possession of the vehicles within the period of the contract. These trucks/vans could be new ones or used,provided they are sound and are in a good working condition. OUR OFFER:- 1. We will pay the trucks/vans owners on a monthly or bi-weekly basis. These payment will be made at the end of each month or every 2 weeks after the trucks/vans has started working, Payment will be made as agreed. 2. We will make accommodations available for all the Drivers and Motor-boy (Trucks) 3. We will handle the provision of supervisors for the Trucks/Vans for a proper monitoring of their operations. 4. We will handle the Drivers and Motor-boy's daily allowances(Trucks) 5. We will handle the monthly maintenance of the Trucks/Vans by changing the oil and the oil filters, monthly. What the Trucks/Vans Owners will Handle in this Partnership:- 1. They will be in charge of employing their Drivers and Motor-boy(In case of Trucks). 2. They will pay their drivers monthly Salaries. . 3. They will be in charge of handling the major maintenance of their Trucks/Vans . 4. They will handle all the government paper works on the Trucks/Vans. 5. They will be responsible for the registration of insurance and trackers(optional) for the Trucks/Vans. 6. They will handle the purchase of their Trucks/Vans. Type Of Trucks/ Vans Needed:- • 30/40 tons Howo Chinese Dump Trucks. • 20/25 tons Mack Trucks. • 30/45 tons Containerized body and open roof Trucks. • Other Trucks, Vans etc can also be accepted. Number Of Trucks/Vans Needed: We need as many as possible. For more info: pls Call/Whatsapp 09022162936 or 09060458065 |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by rotecch77(m): 1:10pm On Nov 04, 2020 |
Dennis3D:That section( stir area) doesn’t need. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by PropertyVendor(m): 1:17pm On Nov 04, 2020 |
Updated. 04/11/2020. (New price list) This is intended to assist anyone who is seeking for robust information about cost of building materials (Cement & Rods) available in Edo and Delta State markets. It will also assist help real estate investors who want to plan towards a building project and those who want to invest in buying and selling building materials. Nigerians oversea can as well benefit from the list, to get the idea of what is obtainable in the market back home and use it to make adequate planning towards your upcoming projects in the country. Prices may vary from state to state, however we will be using the prices of building in Edo and Delta State. Currently, the prices of Rods is on the increase, while cement is scarce in Edo State due to bad roads, etc which has made the price to skyrocket. This list will continually be updated DAILY. Below are our prices of building materials on 04/11/2020: Remember to order your Rods and Cement from our list below as we await your calls. Visit >>> Latest Prices of Building Materials in Nigeria For more details.... DANGOTE CEMENT 3X 50KG (100 – 299 bags) ===> N 2,850 (300 – 600 bags) ===> N2,800 https://propertyvendor.com.ng/wp-content/uploads/2018/08/warehouse-propertyvendor-768x576.jpg For Truck Price Call : 070-6481-6581 REINFORCEMENT STEEL BARS 25mm Rods (22 Pieces) per tonne ============> 220,000.00 NGN 25mm Rod One Full Length ============> 10,000.00 NGN 20mm Rods (34 Pieces) per tonne ============> 265,000.00 NGN 20mm Rod One Full Length ============> 7800.00 NGN 16mm Rods (53 Pieces) per tonne ============> 257,000.00 NGN 16mm Rod One Full Length ============> 4,850.00 NGN 12mm Rods (94 Pieces) per tonne ============> 257,000.00 NGN 12mm Rod One Full Length ============> 2,750.00 NGN Call : 070-6481-6581 10mm Rods (135 Pieces) per tonne ===========> 270,000.00 NGN 10mm Rod One Full Length ===========> 2,000.00 NGN 8mm Rods (210 pieces) per tonne ============> 280,000.00 NGN 8mm Rod One Full Length ============> 1,350.00 NGN Quarter Rods ( Long ) 50 pieces per bundle ========> 25,000.00 NGN Quarter Rods ( Medium ) 50 pieces per bundle ========> 17,500.00 NGN Quarter Rods (Short ) 50 pieces per bundle =======> 12,500.00 NGN Binding Wires (3kg, 8kg, 10kg, 12kg, 15kg, 20kg) =========> Price Ranges per Kilogram Call, Fidelis – 070-6481-6581 || 080-7590-2447 Note: Prices are same on all locations in Benin-City / Delta State. Free delivery for all items listed (Long Distance May Attract Extra Charges). Prices are based on bulk discounts and apply when you buy in large quantities. Prices are at current rates and may change later due to market forces. Latest Prices of Building Materials in Nigeria |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Jasobry: 1:27pm On Nov 04, 2020 |
krak101:I decided not to take note of the cost to avoid crying. But decided that from parapet level. Parapet : 600k Wood work: 600k Stone bridge roof tiles@3300 by 385 sqms
|
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Jasobry: 1:34pm On Nov 04, 2020 |
krak101:
|
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by rajput4real93: 1:42pm On Nov 04, 2020 |
diordaves:Same here o my brother. When i listened to the two audios, i was speechless. Arrogance at its peak. May the lord bless Darenyx and other good professionals. When i gave him an architectural drawing a few months ago, he nearly killed me with his patience. He corrected it at least seven times despite his tight schedule and still maintained his calmness. I was even embarrassed to tell him the last time. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by diordaves(m): 1:51pm On Nov 04, 2020 |
One4me:The Architecture profession in Nigeria like some other professions is self-regulatory. The body does have a code of conduct that answers all the valid point you've raised. So engaging an architect in truth and in spirit is not very complicated and is not fraught with potential pitfalls. From my experience over the years, it is a very simple engagement process: You walk (or call) into an architect's office and you tell him/her for brief. For example: Client: I want to build a four flats storey building for rent. Two bedrooms each. I want one ensuite master bedroom and one communal toilet. I don't want a visitor's toilet. The rooms should not be too big and I like it light and airy. Do you have experience in doing this and what is your charge? Architect: Yes I have experience in doing this. My fee is N250K but you will pay N5k non-refundable advance fee. This 5k will be deducted from the final fee after the job is done. If you change your mind pathway through you will not get a refund. Client: Ok. Do you have any sample floor plan I can see just to trigger off my mind on what I want? Architect: Yes. (produces three previous work for perusal) Client: Can I take these home to study? Architect: No Sir but don't worry, I will give you some floor plans to study. Client: Ok. I think I like this one ( client settles for one) but I like you to make so so and so modification. (Client spells out what they want). Architect: Ok. I will give you three different floor plans by Friday for you to go through over the weekend and let me know your decision. I can make a maximum of three modifications for free after that, any further request for modification is 5k. Client: Why? Architect: This is to help you make up your mind so we don't drag this endlessly. Client: Ok. After I settle for a plan what next? Architect: You will pay 100k to commission the job. Client: When will the structural drawings be ready? Architect: I will get the structural drawings ready by month-end that is 31 October 2020. Client: That is too long. Can you do it earlier? Architect: I have a one-week seminar in Abuja I must attend and I have some other pending jobs, so the best I can do is 31 October 2020. Client: Ok. So I pay the balance after all job is completed? Architect: No Sir. You will pay a further 100k for us to take the plan to the local government for approval. Then you pay the balance less the 5k after the approval. Client: Why can't I pay the balance after the approval? Architect: We will need to pay the local government fee which is 80k in this State. Client: This is good enough for me. Is there any agreement to paper I can sign? Architect: Yes Sir. Thanks for your patronage. From the above, all the points you raised are answered. If you walk away, you lose your deposit; the architect is reasonably compensated for their time. Do you want a free plan by trick? No. The floor plan given is just a draft plan that the client can't work with without dimensions. There is a timeline for completion. You make payment at the completion of each stage and everything is spelt out upfront. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by EgunMogaji2: 2:03pm On Nov 04, 2020 |
rajput4real93:And he’s a vampire too because he seemingly never sleeps. Answers my questions promptly. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by EgunMogaji2: 2:09pm On Nov 04, 2020*. Modified: 4:40pm On Nov 04, 2020 |
diordaves:I’ll never patronize nor recommend anyone to him. They’ve haven’t made the soap that he’ll use to wipe himself clean in my opinion. In my professional experience you can teach technical skills but not customer service, that can just be faked. Hence why people get into trouble rather easily. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Aforxzy(f): 3:18pm On Nov 04, 2020 |
I want to do soil test in Ibadan. Please recommend a reliable and affordable geotechnical coy. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Horlardorjah(m): 3:21pm On Nov 04, 2020 |
diordaves:� correct. you just analyzed it for even a layman to understand. you just have to pay something either you call it consultation or commitment fee, lots of we architects had already fell into hands of people like the previous man saying he won't pay till he gets a drawing kind of. either cause we were trying to gain clients or please the person that referred them to us and at the end, we get played by people like him. I didn't bother to listen to the audio cause I knew it will be true. mehn that's like the third person complaining of his attitude but I guess it works for him that way. my own dey my body too, please no one should quote or attack me oh. lemme sleep n come back |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by DancingSkeleton(m): 4:24pm On Nov 04, 2020 |
dbshaywhy:Alright |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Johntemmy(m): 4:26pm On Nov 04, 2020 |
[quote author=valencia2012 post=95667179]Kindly give me the cost of the following: 1. 2 by 2 by 16 hard = 430 pieces 2. 2 by 2 by 16 soft = 330 pieces 3. 2 by 4 by 16 = 550 pieces. Including transportation and logistics to IMO state. And also a partial projection of what it might look like by the end on November. Thanks. [/quote Am in South West It's by 12 here not by 16 I mean 2by2by12 2by4by12 etc not by 16 sir. Almost every region as different sizes/height such as 12,14,16,18 long etc It will be easier if I could supply you by12 in long from here and give you a professional carpenter from my team to do the job. Note: the quantity will be increase a little once we agreed on using 12 instead of 16. But if it's the said 16 you prefared most I will surely get it for you by going to Benin and supply you from there...or I come down to imo state to get you the best and do a professional job. For the cost I can only say about the 12 from here down there cos if it reduce or high by then I will surely tell you. For the 16 till when you are ready sir cos it may be reduced by then or high in prices.. our work get season... I will be happy to work with you sir. Thank you. |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Footstradamus(m): 4:33pm On Nov 04, 2020 |
[quote author=Jasobry post=95679517][/quote]This looks nice Saw the pic of how far you have gone, nice job so far |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by Access14(m): 5:06pm On Nov 04, 2020 |
Is it possible to have an Escrow in this group to avoid too much tense of Disappointment from Clients, Contractors and Vendors ? The Elder's in the house, Pls advice One4me: |
| Re: General Topic Thread-To Discuss Anything And Everything in Building Construction by n3xt(m): 5:43pm On Nov 04, 2020 |
Kestar12:Everything was fine until I read the bolded part. What if I don’t want to deal with the recruitment of truck driver or motor-boy? |
Discuss Anything Property And Lets Make Money In The Process • Residential Building Construction Mistakes In Nigeria You Need To Avoid • General Topic Thread - The Roforofo Thread Of Construction Activities • 2 • 3 • 4
Viewing this topic: 5 guest(s)

