₦airaland Forum

Coward!

Why didn't he find solid concrete floor to jump.

Of all the whole windows to choose he had to pick one with a car to break his fall.

murphyibiam15:
Yes I used the right amount and the right transmission oil

If you are sure you used the right amount of oil and it is not too low, then you might need to scan the car.

You probably have a faulty transmission control.

There is a computer controlled solenoid attached to the transmission control that controls the oil pressure. If it is bad it wont function properly.

If your tranny oil is too low, it wont function properly.

If its not any of those 2, then you might need to ask whoever changed your oil some very serious questions.

What makes you think you have the power to divide?

What you call Nigeria is not a nation

It is some people bread and butter.

As dem never chop belleful, you think say dem go siddon open eye dey look una as you dey divide?

Did you use the right transmission oil?

Are you sure you used the right amount?

femicyrus:
What exactly are we intending to go and do at the world cup?

Same thing you have always done.

Mark register

tonididdy:
It's not poisonous.
You can tell from the round eyes and pointed face.



@OP it's a perfect pet for snake lovers but I don't like snakes of any kind, cats too

All baby reptiles have rounded and pointed face

heybeebugatty:
I will use my teeth to loose it...
I come in peace

How many you still get.

chival:
This method will probably ruin the spanner afterwards, but I guess it's something to try if there's nothing else to be done.

Yup.....

Desperate times calls for desperate measures.

I would have said who the hell rounds out a lug nut anyway.

But.... I've found myself in this quagmire twice....so who am I to judge.

Charmingrascal:
Even with this, some will not grip.

To avoid such situations have tools like Torque wrench in your car.
It is not that costly

Never use a torque wrench to loosen a bolt.

1. You'll break the nut
2. You'll damage the torque mechanism

Use a breaker bar instead

Timagex:
Hello car lovers! Hope Monday was good?
So, I had to change a Tyre in an emergency situation today and I encountered a problem. After unscrewing two wheel bolts from the Tyre, the third one was not coming off as the wheel spanner could not grip it. Taking a closer look, I discovered that the edges around the wheel bolt has no friction. It was almost round. It took the intervention of a vulcanizer before the bolt could be unscrewed.

My question is, incase of situations where the service of professionals cannot be reached, how can such an issue be handled? Please move to the front page for wider views..

Its very simple.

Well...for this kind of emergency you would ideally need to have some tools handy

You'll need to have an appropriately sized impact socket with an accompanying breaker bar.

But lets assume all you have is the regular cross spanner.

What you want to do is this:

1. find the side of the spanner that's slightly smaller than the bolt.

2. Using a hammer or something sufficiently strong, you'll need to force the spanner to fit the bolt. This is why you ideally need an impact socket. The socket can take the beating. But for the spanner that side will probably become useless afterwards

3. You want to make sure you force the bolt into the spanner all the way in. This will give it enough grip.

4. No after you have satisfied yourself hat there is enough hold on the bold you want to gently hit the spanner counterclockwise to unscrew the bolt.

5. This shoudl unscrew. Unscre it till its just enough to allow you to use your hand to unscrew the rest of the way.

6. Now this time, you want to hit the spanner up and down to break the hold so that the spanner can come off the bolt.

7. Once you have removed the spanner, unscrew the bolt the rest of the wsy with your hand

Aurelius1:
And you think that is easy to achieve? If it were so, bookies would have closed shop.

No it's not easy. It wasn't meant to be easy.

Nothing good is easy. That's why only the strong get the goods.

Adopt a more calculated approach

Adopt a more calculated approach

2+ Odds

2+ Odds

Adopt a more calculated approach

2+ Odds

There is always a risk to everything. You just need to know the risks and manage them

Adopt a more calculated approach

Smart Bet Profits Club

Accumulator odds are a waste of time and money

Accumulator odds are a waste of time and money

Don't bet blindly. Have a strategy

Accumulator odds are a waste of time and money

Bookmakers will hate you for this