₦airaland Forum

We need his likes to stir things up!

Check the frequency of the generator. This may most likely be the issue.

The frequency should be 50Hz otherwise get a generator technician to tune it. Changing the generator AVR also can fix the frequency issue.

We're waiting for your feedback.

rowon:
Hi guys
I have a generator 9-10 kva that I use to power my 2kva luminous cruze inverter. The Generator is about 10months old. Recently the generator stop charging my batteries 2 pieces of 240Ah but NEPA still charges when the voltage is not low.my technician said I would need external 30amp charger which will work for both generator and NEPA.please guru I need your advice

Call:

.0.80.333.43911

SonyaSpence:
hello, where can I get these?

Quite a humble lieutenant!

GSR, Hausstrom, Glow!

GSR: 2 Years Warranty
Hausstrom and Glow: 18 months warranty.

All made in India!

Opistorincos:
Good evening house, which tubular battery brand is rugged and long lasting?

Great.

Never knew the Gulder Search was still on! ���

Hmm....

I've been to Alaba twice this week.

It seems we now have new ratings for solar panels now.

What used to be....

100W is now 150W.
200W is now 250W.
250W is now 300W

....and so on!

Oga, this is a 1.4kW Pump and not 2.5HP Pump.

The 2.5-2 is just a model number.

justcallmenuel:
2.5HP Grundfos solar pump available, #550,000. Call/WhatsApp us on 08168986461

Can't find it on PlayStore!

Vanished!!!

The amount of fierce looking security personnel loitering around the classroom is enough for the lecture to award them.....Let My People Go Grades

I referred to the University and not the class of degree that he got.

Jsucre:
2nd class upper

Nice one.

It seems like an UPPER CLASS University!

Hmmm...

Farmicare is modified.

olopan:
I think famicare is modified sine wave inverter but I am not 100% sure just like the mercury inverter using two battery

These are not guzzling loads.

Your system should have just be fine.

From the disarray in the image you shared with us, the solar panels mounting may be worse.

Roof inclination, solar panels direction etc can be factors affecting your harvest.

Just as suggested by one of us here, you need to get an expert to have a second physical look at the installation.

Unfortunately, I don't know any installer in Benin.

We're in Port Harcourt.

en0uwem:
a. 30 6watts ceiling led light. 6 24 Watts ceiling led light. 1 led television. 1 standing fan. A chiller that we turn on occasionally - maybe 1hour a day. One outdoor led video display - I don't know the wattage, but we also turn it on occasionally.

b. 7am to 6pm

c. Benin City

I tire ooh.

adrusa:
Why would he need to fly in someone from Lagos? Is Edo State a jungle or the only good installers are in Lagos?

Please provide answer to the following

a. Your loads
b. Run time
c. Your location

That will help to further diagnose the system.

en0uwem:
Good day everyone.
This is the solar system that was setup for my store. It's been about a month now since it was setup.
The problem with this system is that harvesting and charging is very poor. It barely charges well. And I am using it off grid - I only charge with the solar panels.

The charging is slow and if it continues this way, I fear the battery won't last as I hardly get a full charge. It's always one or two bars charging on very sunny days.

Please what should I do?

10mobile:
Facebook hacker detected.

Like When NEPA *Take* Light!

BLACKOUT!!!

Let's meet on SoftTalk.

You can download it from PlayStore or AppStore

Training Ongoing.

You can register at https://JezPower.com

Thank you.

My Dear Arsenal

Literally Good Head

Tejirhee:
Please could you help me with the meaning of EMAMUZO??

He should thank God.

Interesting read!

It's well!

The Vmax of 160W should be about 18V, and also your maximum PV voltage input of the CC should be at least 50V, so 2S1P is a better option.

Thank you.

IYGEAL:
Good evening everyone

Please, between 2s1p and 2p1s, which is the better way to connect 2 pieces of 160W panels to charge a 200ah 12V battery by means of a 30amps Mppt CC?

Solar Installation Training in Port Harcourt!

DATE:
1st of February, 2020.

VENUE:
JEZ Solar, No 5, Epirikom Road Adjacent St Peter's Anglican Church, Wimpey Junction by Ikwerre Road, Mile 4, Port Harcourt.

TIME:
10am (Morning Session) or 4pm (Evening Class). You can choose the class that's convenient for you.

After the training, a student will be able to install a complete solar system, solar pump, solar street lights etc.

Certificate of Completion will be awarded at the end of the training.

Training fee: 20k.

Duration: 7 Working Days.

Please Call/WhatsApp 0803-334-3911 for more details.

Thank you.

Fair pricing.

Thank you.

wilmaria14:
250k with 200w mono panel 2

How much is this?

wilmaria14:
it have